Reviews Wide Belt Sanding Machine

BUCKTOOL 5.0A Belt Disc Sander 4 in x 36 in Belt and 6 in Disc Sander with 3/4HP Direct-drive Motor and Portable Al Base, BD4603 Upgraded Model

  • MAINTENANCE-FREE: This sanding belt and disc were directly driven by the motor shaft, you need not adjust the belt tension, and you don't have to change the damaged belt like before.
  • INCREASE EFFICIENCY: The motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 3/4 HP fully enclosed induction motor, providing quiet but powerful performance.
  • MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding of curved work-pieces, it has a quick sanding belt replacement design & track control function.
  • TWO CAST AL WORKTABLE: Equipped with two cast aluminum workbenches for more convenient sanding, and the sturdy cast aluminum base with rubber foot prevents vibrations, to ensure a better experience, we suggest matching with our Y-Fitting Hose.
  • TWO-IN-ONE SANDING MACHINE: This sander meets CSA standards, two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc, the angle adjustable work table with miter gauge can be used on both sanding disc and belt.
Check Stock

WORKPRO Belt Disc Sander, 4 in. x 36 in. Belt & 6 in. Disc Sander with 6pcs Sandpapers, Cast Iron Base for Sanding Woodworking, DIY Decoration

  • 2 in 1 sander: This sanding machine includes a 4 x 36-inch belt sander and a 6-inch sanding disc with extra 3*belt and 3*disc, which meets your different applications, like wood. Woodworking will get a lot easier with the WORKPRO Belt/Disc Sander..
  • Horizontal & Vertical: The benchtop sanding belt can be adjusted from horizontal to vertical providing different position for sanding work pieces of different shapes and size. Using the hex key loosing the positioning bolt and then adjust the position. Good helper for woodworking and all your DIY needs..
  • Multi-Angle Sanding: The worktable can be tilted from 0°-45° for bevel sanding. A miter gauge increases accuracy , which is recommended for sanding small end surfaces on the sanding disc..
  • Powerful Motor: This sander is powerful with 4.3 Amps 1/2 HP motor, providing 1900 SFM of belt speed and 3600 r/min.(RPM) of disc speed, which is more professional than other sanding machine..
  • Good Design: The tension quick release lever helps you switch and replace sandpaper. Dust port allows a dust-free operation when connecting with a dust collector. Sturdy base can be well fixed on the workbench, ensuring the sander stays stable while you're sanding..
Check Stock

VEVOR Belt Sander 4" x 36", Disc Combo Sander 6",Electric Adjustable Bench Belt Sander 375W,Grinder Bench Sanding Machine With 4 Rubber Foot Pad

  • Combined Belt & Disc Sander: The bench belt sander is combined with a belt sander and a disc sander, and it is easy and quick for you to adjust and change the belt. Belt size: 36" x 4"/915x100 mm, disc size: 6"/150 mm. The belt sander features both horizontal and vertical sanding..
  • Various Angles Sanding: The 7.4"x5"/188x125 mm sanding tables can tilt 45 degrees. And our machine is equipped with a miter gauge that can achieve 180 degrees accurate sanding..
  • 375W High Efficient Motor: This disc belt sander works well with a high-speed pure copper motor. This copper motor runs smoothly, and the energy consumption is low. Its 375W power provides a no-load speed of 1420 RPM. The safety switch is easy and secure to operate..
  • Durable Steel Construction: The disc-and-belt sander is made of heavy-duty steel. It is durable and can be used for a long time. A strong base with rubberized pads provides extra stability, avoiding any heavy vibrations when operating..
  • Wide Application: This belt and disc sander can satisfy you and work great in grinding metals, wood, acrylic, and other materials. It is widely used in parts factories, building materials factories, etc., perfect for tool polishing..
Check Stock

POWERTEC BD1502 Belt Disc Sander for Woodworking | 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc

  • Includes: heavy duty belt and disc sander combination flaunts a 1”x30” sanding belt, 5” sanding disc, 2 work tables with 0° - 45° tilt, heavy duty miter gauge, belt guard, and 2 Dust ports.
  • Features: 2 cast aluminum tables provide exceptional work support and tilts up to 45 degrees, precision tracking system.
  • cast iron base prevents machine from wobbling and walking in use.
  • 2-1 design: sanding machine is equipped with both an abrasive Belt and disc Combo, large enough and perfectly sized to handle an assortment of sanding and woodworking applications and can sand hard to reach places easily.
  • Power: enhanced with a quiet but powerful 120 V, 60 Hz, 1/3 HP (peak), 2. 3 amp induction motor delivers 3160 FPM For the belt and 3450 RPM for disc speed.
  • Dust pickup: This belt and disc sander Combo includes two 1-3/4 O. D. Dust ports providing a tidy and effective dust collection.
Check Stock

WORKPRO Disc Belt Sander, 1 in. x 30 in. Belt & 5 in. Sanding Disc, Power Combination Sander for Woodworking, including 6pcs Sandpapers

  • Belt & Disc Sander:This combination sander is professional for your woodworking, including 1 x 30-inch belt and 5-inch disc, with extra 3pcs 100-Grit belts and 3pcs 80-Grit discs, which can be used for sanding projects on various materials..
  • Adjustable Easily: The sanding disc work table can be adjusted from 0 to 45 degrees to meet your different angle needs. Using it with miter gauge is suitable for contour sanding and shaping. Great sanding tools for woodworking and all your DIY needs..
  • Powerful Sander: The benchtop belt/disc sander is driven by motor directly, providing 3160FPM of belt speed and 3450 RPM disc speed, which shows powerful performance than traditional design..
  • Sturdy Cast Iron Base: This sanding machine is equipped with sturdy cast iron base that could fix on the workbench to prevent vibrations, providing stability and improving work efficiency..
  • 2 Dust Ports: This belt&disc sander is equipped wit 2 dust ports, collecting the dust from belt and disc, which can keep your work environment more clean. Note: belt/disc dust port size is 1.7inches (outer) and 1.5inches (inner)..
Check Stock

POWERTEC BD4600 Belt Disc Sander For Woodworking | 4 In. x 36 in. Belt Sander with 6 In. Sanding Disc

  • Includes: heavy duty belt and disc sander combination flaunts a 4”x36” sanding belt, 6” sanding disc, A belt with 0° -90° tilt including a work support, a disc work table with 0° - 45° tilt, a heavy duty miter gauge, and a dust port.
  • Features: a 6-1/2 x 8-3/4 inch cast aluminum table that provides exceptional work support and tilts up to 45 degrees, precision tracking system, a safety key switch, and a quick release belt change.
  • sturdy cast iron base and mounting hole prevent wobbling and walking.
  • 2-1 design: sanding machine is equipped with both, an abrasive Belt and disc Combo, large enough and perfectly sized to handle an assortment of sanding and woodworking applications.
  • Power: enhanced with a quiet but powerful 120V, 60 Hz, 1/2 HP (peak), 4. 3 amp induction motor delivers 1900 FPM For the belt and 3600 RPM for disc speed.
  • Dust pickup: This belt and disc sander Combo includes one 2-1/4” dust port which provides a tidy and effective dust collection.
Check Stock

BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo, Bench Knife Sharpener with Large Work Table, Professional Benchtop Belt Sander with Direct-drive 4.8A Brushless Motor for Metalworking, BD1801DS

  • DUAL SPEED DIRECT DRIVEN MOTOR: 4.8A brushless induction motor can provide 1750 & 3450 RPM speeds for your different needs, 25% more sanding efficiency than belt-driven motor.
  • MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work.
  • MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing.
  • EASY BELT DISC CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast. Hoop & loop design sanding disc makes disc replacement super easy and does not need to use glue anymore.
  • MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.
Check Stock

Happybuy 2 IN 1 2inch Belt Grinder for Knife Making 6inch 3450rpm per min Belt and Disc Bench Sander 90 Degree Belt Holder with Sturdy Base and LED Working Lamp

  • 【HIGH EFFICIENCY】- Sand belt and sand disc are integrated into one. The rotate speed of this machine can reach 3450 rpm/min, with disc speed of....
  • 【STURDY STRUCTURE】- Preset 6" disc with 60 mesh, and 2" belt with 80 mesh. Adopts heavy-duty base to prevent walking and wobbling during....
  • 【HIGH FLEXIBILITY】- Sanding belt and disc are both replaceable according to different material. The angle of belt holder is 0-90°adjustable..
  • 【WELL-DESIGNED DETAILS】- Equipped with protective eye guard to prevent sparks and debris from entering eyes.
  • 【WIDE APPLICATION】- The sanding disc and belt can fully meet the grinding requirements. A perfect tool for mirror finish, grinding, and polishing....
Check Stock

WEN 6515T 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc

  • Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc.
  • 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc.
  • Sturdy heavy-duty base prevents walking and wobbling during operation.
  • Features two separate dust ports for maximum vacuuming efficiency.
  • Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty.
Check Stock

240# professional nail sanding bands for nail drill,drill sanding band with storage box,include 100 superfine grinding wheel sand bands and 2 pieces mandrel for most size 3/32' nail drill machine

  • Nail sanding belt set:you will receive 100 manicure sanding bands,2 pcs 3/32 inch silver replacement nail drill bits sanding band mandrel and 1storage box,extreme fine girt 240 # is perfect for nail polish and polishing tools,suitable for professional studio or home use,perfect for manicures and pedicures.
  • Quality material:these nail art sanding bands are made of quality sand band with high hardness, durable and won't fall apart.
  • the grinding head bits are made of quality stainless steel material, with good durability, the handles of grinding head bits are constructed with solid metal material, stable and easy to insert into the bits and stay steadily.
  • Multifunctional sanding belt:the nail sanding bands are suitable for most sizes of 3/32 inch electric nail drills and other drills that use sanding bands. It can polish, shape, shorten, smooth and polish natural and artificial nails, remove gel nail dip powder poly nail gel and so on,can also be used for daily engraving and milling.
  • Portable design:lightweight and portable, storage box packaging,suitable for most size 3/32" nail drill machine,sanding bands are easy to carry and allow you to do nail artwork at anytime anywhere, ideal for spa or personal manicure,DIY nail art anywhere,It is fun an....
Check Stock