Reviews White Trailer Lights

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

Partsam 4Pcs 4" Inch Round Led Stop Turn Tail Back-up Reverse Fog Lights 12 LED Include Lights Grommet 3-Prong Wire Pigtails Round LED Trailer Tail Light Kit for Truck Trailer RV( 2 Red + 2 White)

  • Package includes 2 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation.
  • These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights).
  • Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug.
  • These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install.
  • IP65 waterproof and please do not use it under water.
  • Easy to install: White is the ground, red is the high brightness and Black for low brightness.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led trailer tail lights are compatible with almo....
Check Stock

Partsam 30Pcs 3.8

  • x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
  • Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
  • As every truck lamp come with two wires, they can only use as one function a time.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
  • Tips and Warranty: 1. These led lights are not dimmable.
  • The indicator light is hardwired with 2 wires and can be used as constant on trailer light....
Check Stock

LIMICAR Trailer Wiring Harness Kit, 25ft Trailer Wire, Trailer Wiring Harness with 4 Flat Extension Connector, 4 Pin Flat Wishbond Trailer Wiring for Utility Boat Trailer Light Kit

  • 25FT Male & 4-Flat Female Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (25' & 4') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 25' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
Check Stock

Partsam 5x 2 LED Marker Light Cab Panel Light 9 Diodes Sealed Round Clear/Red w Grommet/Pigtail, 2" Mini-Reflex round sealed LED Side Marker, Clearance or ID Light

  • Round Red Led marker Lights w Reflector -- Clear Lens. White Wire is the GROUND and Black is positive. DRILL a hole about 2-1/4" to install it.
  • Color: Red Light / Clear Lens. Each unit Built-in High Power Super Bright Flux 9 leds Lights..
  • Commonly used on Commercial Vehicles such as Peterbilt/ Freightliner/Kenworth, Heavy Duty Trucks, travel trailer, horse tariler, camper trailer, cargo trailer, motorhome, RV etc..
  • Functions: LED Side Marker, Clearance light, ID Light, led trailer side marker lights, led trailer lights, led clearance lights, led trailer clearance lights, led submersible trailer lights etc..
  • This is Brand New High Quality Aftermarket Product. Meet the professional specifications..
Check Stock

SUZCO 25 Foot 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit 4-Way Plug 4 Pin 21 Male & 4 Female Extension Connector & Wishbone-Style with 18 Gauge White Ground Wire with SAE J1128

  • 【ITEM TYPE】This is a 21ft male & 4 ft female 4-flat marine trailer wiring harness with 4-way conductors and a 2ft white ground wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. The 4 flat trailer wire is color-coded and bonded wire to easily splice into your trailer's wiring system, no need for splicing wires. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【EXTENSION INCLUDING】This 25foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an COPPER trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion resistant terminal..
Check Stock

LIMICAR Trailer Wiring Harness Extension Kit, 36ft Trailer Wiring Harness with 4 Flat Extension Connector, 28' Male & 8' Female with 4 Pin Flat Wishbond Trailer Harness for Utility Boat Trailer Lights

  • 36FT (28' Male & 8' Female) & 4-Flat Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (36') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 36' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
  • Widely Application: Suitable for marine boat trailer, horse trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug). Not compatible with motorcycle....
Check Stock

SUZCO 36 Ft 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit, Custom-Made 28' Male & 8' Female with 4' White Ground Wire, 4-Way Plug 4 Pin Male & Female Extension & Wishbone-Style & SAE J1128

  • 【ITEM TYPE】This is our SUZCO custom-made vehicle-specific 36FT male & female 4-flat marine trailer wiring harness with 4-way conductors and a 4' white ground wire, it fits for longer trailers and for customers desiring to wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【36' EXTENSION INCLUDING】This 36foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an aluminum trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with a 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion-resistant terminal..
  • 【4-WAY CONNECTORS & FITMENT】You can inst....
Check Stock

Partsam 10Pcs 3.8\ Inch Smoked 6 White LED Boat Interior Navigation Courtesy Utility Strip Light Bar Marine Deck Transom Step Cockpit Lighting Lamp Waterproof for Fishing Pontoon Kayak Yacht Sailboat

  • ...s, camper outside step light, kayak cockpit lights, deck Lights, accent lighting, fishing pontoon boat interior lights, kayak night fishing, led stern light, Decorate Light, Night light, stairs lights,Boat Center Console Light, under dash lights, walk way lights, Transom Light, Golf Cart Light, Boat Interior Lights,trailer marker lights, trailer clearance lights, white led marker lights and so on.
  • This white led strip is hardwired with 2 wires and can be used as constant on boat lights: White is negative and Black is positive.
  • These lights don't come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • Tips and Warranty: 1. These boat lights are not dimmable.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off)switch to make it come true.
  • 3. When you wire several lights together, you can wire them in parallel.
  • 4. These trailer lights are polarity dependent and They will not work if polarity is reversed.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • We truly offer 1 year warranty for our white utility strip lights.
Check Stock

8Pcs 2 Inch Round Led Trailer Marker Lights, 4 Amber + 4 Red 2 Inch Round LED Side Marker and Clearance Marker Lights 4 LED Sealed Flush Mount w/Grommets and 2 Prong Trailer Wire Pigtails Waterproof

  • This listing includes 4 Pieces 2 Inch round amber led marker lights and 4 Pieces 2 Inch round led marker lights Red. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails. Sonically sealed, IP67 waterproof housing and lens unit is submersible.
  • Each 2 inch round led trailer side marker lights come with 4 LEDs, providing you better visability when driving on road.
  • These 2 inch round led trailer clearance lights are universal for almost all 12v dc vehicles, such as Semi Truck Trailers, Utility Truck, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV etc..
  • Wiring tips of Each 2 inch round trailer lights: white is the negative and black is the positive.
  • Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights), you may need to drill a hole about 2-5/16" to install these 2 round led marker lights.
  • Notes about these 2 inch round trailer LED clearance marker lights: these 2 inch round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Check Stock