Reviews What Is An Ipr Valve 3s

Injector Pressure Regulator Valve 6.0 Powerstroke IPR＆ICP Replacement for 2003-2010 Ford Super Duty F250 F350 F450 F550 E350 E450 Excursion 6.0L Diesel Turbocharged Replaces CM5126 AP63417 5C3Z9C968CA

  • [INJECOR PRESSURE REGULATOR VALVE]Direct replacement failed, encountered unable to start, abnormal idling or jitter, rupture, diesel the IPR valve may have defects to stop the work.IPR valve 6.0 powerstroke and ICP sensor 6.0 powerstroke work together to control the oil pressure of the injector in the high pressure fuel system.The 6.0 powerstroke IPR valve is responsible for controlling the output pressure of high pressure oil pump..
  • [FITS]Replacement for Ford 6.0L V8 Diesel Turbocharged Vehicles,Compatible with 2005-2007 Ford Super Duty F250 F350 F450 F550 ,2005-2010 E350 E450,2003-2010 Excursion..
  • [REPLACE PART NUMBER]5C3Z-9C968-CA, 5C3Z9C968-CA,5C349C968CA,5C34-9C968-CA ,1846057C1,CM-5126,CM-5054,AP63417,HTV102,W3250216.Replacement fits for ford 6.0 ipr valve and ford 6.0 icp sensor..
  • [QUALITY]Our 6.0 powerstroke IPR valve and 6.0 powerstroke ICP sensor replacement pieces are rigorously tested and fully fitted in design. Although this is not a true OEM part, the injector pressure regulator is a direct replacement part of your factory IPR valve and can replace defective IPR and ICP. We are made of high quality materials for long term durability and reliability..
  • [WARRANTY]We provide warranty service. Once there is a problem with the product, do not hes....
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

6.0 IPR Valve Injector Pressure Regulator | Replacement for 2003-2010 F250 F350 F450 F550 E450 Super Duty Excursion, 04-10 E350 E450 | OE# 5C3Z-9C968-CA, CM-5126, 1846057C1

  • OEM FIT: If you are experiencing no-start, erratically idling or jerking, then you may have a problem with your IPR valve. This replacement valve has undergone a rigorous testing to ensure proper operating parameters to factory specification, exactly OEM design to replace your defective IPR valve.
  • PREMIUM QUALITY: Precisely manufactured internal valves, diaphragms and springs means you will get a fairly reliable IPR valve to perform excellently under all engine operating conditions, properly control the pressure in the high-pressure oil system.
  • FITS: Replacement for 2003-2010 Ford F250 F350 F450 F550 E450 Super Duty, 2004 2005 2006 2007 2008 2009 2010 Ford E350 E450, 03-10 Excursion. Since this IPR valve is a direct replacement for your factory 6.0 powerstroke IPR valve, operation is quiet and without noise of regulator.
  • REPLACE OE NUMBER: 5C3Z9C968CA, 5C3Z-9C968-CA, 1846057C1, CM-5126, AP63417, HTV102. Robust diaphragm materials design for greater resistance to leakage, improved durability and compatibility with a wide range of fuels.
  • 24-MONTH WARRANTY: If the fuel injector pressure regulator valve fails, cracks, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND.
Check Stock

7.3L Fuel Injection Pressure Regulator Sensor, IPR Valve & ICP Control with Electrical Connector Pigtail Wire Harness Sensor for Ford F-250 F-350 F-450 F-550 F-650 F-750 E-350 E-450 E-550, 1829856C91

  • [Fitment] - 7.3 IPR valve + ICP control sensor fit for Ford E-350 Club Wagon 03, fit for Ford F-250 F-350 F-450 Super Duty 99-03, fit for Ford F-750 99-03, for Ford F-250 Super Duty 01-03, fit for Ford E-350 Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment an....
Check Stock

Injector Pressure Regulator Valve - IPR Valve - Compatible with Ford Trucks - Powerstroke 6.0L Diesel - E-350, Excursion, F-250, F-350 Super Duty - Replaces 5C3Z9C968CA, CM-5126, 5C3Z-9C968CA, AP63417

  • Replacement Injector Pressure Regulator Valve - regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus, being a critical component in your vehicle system..
  • Compatible Replacement for Ford 6.0L Vehicles - 2005 E350 Club Wagon | 2005 - 2010 E350 Super Duty | 2005 Excursion | 2005, 2006, 2007 F250 Super Duty | 2005, 2006, 2007 F350 Super Duty |. The injector pressure regulator valve can be located after removing the intake and the fuel filter housing above the engine which can be seen attached to the high pressure oil pump (HPOP)..
  • Replaces Part# 5C3Z9C968CA, 1846057C1, CM-5126, 5C3Z-9C968-CA, AP63417 - commonly found on popular F-250, F-350 Super Duty, E-350 and Excursion models with 6.0L V8 Diesel Powerstoke Engines including years 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, this inj....
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

6.0 Injector Pressure Regulator IPR Valve Socket & Air Test Fitting Tool Kit & Fuel Rail Adapters for 2003-2010 Ford 6.0L for Powerstroke E-350/ E-450, Excursion, F-250/F-350/F-450/F-550

  • Fitment -- Fit for 2003 - 2010 Ford Super Duty F250 F350 F450 F550.
  • 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines..
  • IPR Valve Socket -- Replace the worn out injector pressure regulator (IPR) valve, designed to remove/replace your injector pressure regulator (IPR) effectively and quickly!.
  • IPR Valve Air Test Fitting Tool -- Used to quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle where repairs are much more difficult..
  • Fuel Rail Adapters -- High Quality CNC Machined from Billet Brass, allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air..
  • 100% Satisfaction Guarantee -- If you're not 100% satisfied with our Kits, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock

gohantee 7.3 Powerstroke Fuel Injection Pressure Regulator IPR Valve with ICP Control Sensor and Pigtail Connector Compatible with Ford F250 F350 F450 F550 F650 F750, Replace# F81A9C968AA 1829856C91

  • 【FITMENT】The injector pressure regulator valve replacements for ford 7.3L powerstroke only - Fit for Ford E-350 Club Wagon 2003丨Ford F-250 F-350 F-450 Super Duty 1999-2003丨Ford F-750 1999-2003丨Ford E-350 Econoline Club Wagon 1997-2002丨Ford E-550 Econoline Club Wagon 2002丨Ford E-450 Econoline Super Duty Stripped 2001丨Ford Excursion 2001丨Ford F-650 2000-2001丨Ford E-450 Econoline Super Duty 2000丨Ford F-250 F-350 1997..
  • 【REPLACES PART#】 7.3 powerstroke IPR valve replaces part #: F81A9C968AA / AP63402 / F81Z9C968AA / F81Z9C968AB /F81Z-9C968-AB / F5TZ9C968A / 1829856C91 / 1836412C91 / 1841217C91 / 1841086C91 / CM5013 / CM-5013..
  • 【DURABLE + PACKAGE INCLEDE】 7.3L ipr valve fuel injection pressure regulator + ICP control sensor + pigtail connector kit have passed undergoes stringent testing to ensure high quality, durable and reliable under extreme conditions..
  • 【REPLACEMENT NECESSITY】The ipr valve can be located behind the engine attached to the high pressure oil pump (HPOP). It is a solenoid valve that allows high pressure oil to enter the injector by controlling the pressure in the high pressure oil system. Faulty IPR valve can lead to an unstable engine idle, stalling out, and losing overall horsepower..
Check Stock

DieselDestruction Genuine OEM 6.0L Diesel CM5126 IPR Valve & SOCKET KIT !!!

  • IPR Valve comes with screen and o-rings installed.
  • For all 6.0L 2004.5 and newer ( please confirm fitment prior to ordering ).
Check Stock

Injector Pressure Regulator Valve Socket Removal Tool and Seal Kit 6.0 IPR Valve Socket with Seal Kit Compatible with 2003-2010 Ford 6.0L Powerstroke Excursion F250 F350 F450 F550 E350 E450

  • ☸ High Quality: High quality machined from steel or rubber with excellent mechanical and physical properties, this Socket shows its high tightness, corrosion resistance and durability.
  • ☸ Compatible With 2003-2010 Ford International 6.0L Powerstroke Diesel Engines.OEM Number:3C3Z9H529A , AP0035.
  • ☸ The IPR Valve In Your Powerstroke Is Responsible For Controlling The Pressure For The High-Pressure Oil System.The IPR Commands The High Pressure Oil Pump That Fires The Injectors.
  • ☸ The IPR (Injection Pressure Regulator) Is Located On The High Pressure Oil Pump.The IPR Valve O-Rings Are A Common Failure Point.
  • ☸ After-Sales Service:We are a professional team,If you have any questions about our IPR Valve Socket with Seal Kit,please feel free to contact us,we are very so honored to serve for you,and we will answer your doubts in the first time.No need to worry about it..
Check Stock