Reviews Welding Square

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

2022 Everlast PowerTIG 210EXT 210amp Ac Dc Tig Stick Advance Pulse Welder 110/220 Volt Inverter-based IGBT Technology

  • Microprocessor control offers precise management of welding parameters and functions..
  • Portable and Lightweight design offers rugged exterior and a flip down visor to protect panel from sparks and damage..
  • Offers standard type pulse feature for AC and DC, and a special Advanced Pulse for AC for welding thin material, increasing travel speed and reduces warping..
  • Can be used with optional finger amp control torch..
  • Wave form control offers 3 types of wave form for AC welding: Triangular Wave, Advanced Square Wave, and Soft Square Wave..
Check Stock

FLASLD FLASLD Acrylic Coated Welding Blanket,Fireproof Fiberglass Fire Blanket, Welding Curtain for Industrial and Home Use (6 ft x 8 ft, Yellow)

  • FLASLD acrylic welding blanket is used in welding, cutting, laser welding, and soldering. It has a temperature resistance of 1472 ℉, which can effectively resist welding slag, cutting sparks, and flames. It can protect your important equipment and workshop from Damaged by welding slag or high temperature..
  • Do you know what is the most troublesome thing in the use of the welding blanket? Yes, it's the tiny glass fiber debris, it's almost an unavoidable problem, it will irritate the skin and cause itching, if you accidentally inhale it, it will also cause damage to the lungs, FLASLD coats the acrylic on the welding blanket, the acrylic and fiberglass are tightly bonded together, there is no fiberglass debris, no itch and lung damage!.
  • The FLASLD acrylic welding blanket is made of 0.5mm thick alkali-free fiberglass cloth and coated with acrylic on both sides. Compared with ordinary welding blankets, it has higher temperature resistance and is more durable, It weighs 600g per square meter, is lightweight, foldable and easy to carry..
  • We have added multiple grommets to the edge of the FLASLD acrylic welding blanket, it is easy to hang and fix, it can be used as a welding curtain to block welding arc light and welding slag, we provide 5 sizes and two colors....
Check Stock

Forney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

NEIKO 10908A 4x6 Welding Blanket, Heavy Duty Fiberglass Fire Blankets for Welding, Fire Retardant Blanket Made of Fireproof Fabric, Fiberglass Material

  • 100% FLAME RETARDANT WELDING BLANKETS: This fireproof blanket is extremely durable and used for general purpose welding to prevent property damages from sparks and flames..
  • HEAVY-DUTY FIBERGLASS MATERIAL: The fire blanket retardant fiberglass is 19.8 ounce per square yard that provides excellent thermal fire-resistant protection..
  • WEAVING PATTERN DESIGN: These welders blankets have a 30 x 30 per square inch weave design for extreme durability, which stands up to long term repeated use..
  • REINFORCED HEM: These fire-retardant tarps have a 3/8” I.D. brass grommet every 11 inches for secure and easy hanging..
  • WORKING TEMPERATURE: Each welding blanket can withstand up to 1000°F (537°C) to ensure fireproof protection..
Check Stock

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

  • 【Specifications】Voltage Supply: 9-12V DC Input.
  • Input Distortion: less than 1% (at 1KHz).
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
  • Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..
Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock