Reviews Welding Rubber Hose
Hromee Oxygen Acetylene Hose 1/4-Inch × 50 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose
- TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
- 1/4” × 50FT: The length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
- HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these make it ideal for long term use..
- COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
- B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..
Check StockHromee Oxygen Acetylene Hose 1/4-Inch × 25 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose
- TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
- 1/4” × 25FT: The length of each welding hose is 25 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
- HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these features make it ideal for long-term use..
- COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
- B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..
Check StockWeldcote ARG14X10 Hose, Argon, 10 ' with Inert Gas Fitting
- 10' Insert Gas Hose for welding applications.
Check Stock6.56FT Inert Gas Welding Hose, Argon Flowmeter Gas Regulator Welding Hose, TIG MIG Gas Hose, 5/8\ UNF-18RH Fittings
- Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
- Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8" UNF-18RH Fittings 6.56 10 15 20 30 FT.
- The hose length is 6.56 Feet, crimped standard 5/"8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
- The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
- Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!.
Check StockBISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose
- [Propane Weed Burner Torch]: Whether you are removing weeds and ice, or soldering and cutting materials, the BISupply Welding Torch Flame Gun is perfect for all your needs.
- This roofing torch generates temperatures up to 3000 degrees F (1649 degrees C) and connects to 20 lb. (9.1 kg) propane tanks (Tank not included).
- [Versatile Tool]: This landscaping construction tool is perfect for homeowners, crafters, and professional contractors thanks to its versatility.
- Burn weeds, melt snow, and remove paint using this propane torch.
- Thaw pipes, heat roofing materials, and preheat metals for welding and soldering.
- The lengthy torch and hose allow you to work safely and easily in hard to reach areas.
- [Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
- After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
- Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
- Fire will extinguish naturally to remove gases from torch and hose.
- [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosio....
Check StockWeldingCity 150-amp WP-17FV Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Dinse 35-50 Solid 1/2 -pin Cable Adapter with Separate Gas
- Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
- 12-pcs torch package includes: 150-amp air-cooled WP-17 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper.
- Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
- Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve)..
- Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Dinse-type 35-50mm solid adapter (compatible with Miller/Lincoln reference # 195378/K960-1) for use with all mainstream welders on markets, as well as ideal replacement for many other aftermarket or equivalent welders. CHECK ALL PICTURES AND YOUR TIG WELDER FOR MATCHING..
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check StockWeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62
- Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
- 12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
- brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
- Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
- 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
- U.S. based welding and hardware supplier. Strong technical support with experienced custom....
Check StockFlowmeter Hose with 5/8\-18 Male Connectors - 5 Feet Long
- For its use with Flowmeters for Shield Gas in TIG and MIG Welding.
- Gas Service: Argon, Argon/CO2 Mixtures, Helium.
- 5 feet hose with 5/8"-18(M) connector fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
- 290 psi Max Pressure - Braided and flexible - Manufactured in high quality rubber..
Check StockYESWELDER Inert Gas Welding Hose 10 ft,5/\8 UNF-18RH Fittings
- 200PSI Working Pressure - 800PSI Burst Pressure.
- Compatible with argon, CO2, helium and any other welding gases.
Check StockZistel CO2 Argon Regulator with Gas Hose TIG Welder
- Argon/CO2 Regulator For Welding: Zistel Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels..
- Argon Flowmeter With Pressue Gauge: Our argon flowmeter is equipped with pressure gauge, allowing you to view how much gas is left in the tank range 0 to 3500psi..
- CGA580 Inlet Connection: Zistel pressure regulator is suitable for standard Argon /O2/N2 Tanks with CGA-580 Inlet Connection. You can connect the welding hose via female 5/8UNF-18RH fitting..
- Hose Included: Zistel 10Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
- Field of Application: Idea choice for welding, cutting ,chemical and electronics industry.
Check Stock