Reviews Welding Rod Dryer

30Pcs Copper Brazing Rod Copper Phosphorus Solder Round Selffluxing Brazing Rod Copper Phosphorus Brazing Rod 25cm Copper Welding Rod for Air Conditioner Refrigerators

  • 【Perfect Welding Performance】: Our phosphor copper welding rods are mainly used in the welding field of copper and copper pipe joints of....
  • 【Easy to Use】: Standard processing with 2.5 mm diameter, the low temperature phosphor copper welding rod is easy to install and remove.This coated....
  • 【Self-flux】: Our copper welder rods owns stable performance and durability. In particular, this copper welding rod has good fluidity during....
  • 【Wide Fields of Welding】: Our copper phosphorus solders are commonly used for welding copper tubes of air conditioners and refrigerators, which....
  • 【What You Get】: Our package includes 30 pieces of copper brazing rod in 3/32-Inch diameter, and this package is about 0.66 pound. These 30pcs....
Check Stock

MOTOCOCHE 110V Car Body Dent Repair Kit Stud Welder, 3KW 3500A Spot Welding Machine, 7 Modes Multi-spot Bonnet Door Repair Tool with Spot Dent Puller & Welding Guns

  • Ideal Tool -- Car body dent repair kit is a professional tool for repairing body dents/spots. Compared with traditional machines, our machine has smaller welding joints, which can effectively prevent damaging the anti-corrosion paint on the other side of the panel. Welding thickness: 0.6-1.2mm/0.024-0.047inch..
  • Multiple Power Levels -- Auto stud welder dent repair kit equipped with welding guns and pull gun, you can quickly switch between different welding functions. 7 welding modes/Tools, 10 power levels for your choice, you can use the right welding mode and power according to the car body condition..
  • High Quality -- Spot welding machine built-in powerful cooling system to ensure welding efficiency while ensuring fast heat dissipation. Complete accessories to meet your needs for repairing various dents/spots, no need to purchase extra, high quality support for long term use, saving time and money..
  • Applications -- Vehicle panel spot puller dent spotter is suitable for sheet metal fireproofing, spot welding, flattening, meshes, straight pull, studs, flash welding, carbon rod heating, etc. The concave surface can be repaired quickly without disassembling the vehicle, it is an essential tool for auto repair shops and auto beauty shops..
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

50 Pieces Aluminum Welding Rods 0.08 x 8 Inch Universal Low Temperature Welding Cored Wire Brazing Rod Tube for Electric Power, Drill Tap Polish and Paint

  • What you get: each package contains 50 pieces of simple aluminum welding rods, sufficient for welding or surfacing welding alloy with its high strength, good forgeability and corrosion resistance features, giving you the ability to repair more and throw out less.
  • Material and size: made of aluminum material, which has good weldability, high thermal conductivity, high electric conductivity and processing performance, designed with powder core of the inner part for a smooth welding effect.
  • No solder powder needed: aluminum welding rod contains solder powder inside, so you don't need to use other flux powder with aluminum alloy as the welding core and coating as the salt base, convenient and easy to weld.
  • Easy to use: heat the base metal, not the rod, until the temperature of the wire to the operating temperature of 716-752℉ (380-400 ℃), so you can rely on the parent metal heat transfer welding wire to form welds, and waiting for it natural slow cooling after welding.
  • Wide applications: our aluminum brazing rods can be applied to repair most objects that made of aluminum, pot metal, or galvanized steel, also suitable for filling material for pure aluminum, connection with aluminum bus and guide rod of e....
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • COMPACT DESIGN ---- Welding electrode holders have strict quality control and quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
  • FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,....
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock