Reviews Welding Negative Connector

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

  • 【Specifications】Voltage Supply: 9-12V DC Input.
  • Input Distortion: less than 1% (at 1KHz).
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
  • Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

2-pin 8 mm LED Connector kit LED3528 Connector L-Shaped Connector 2 Needle Angle Connector T-Shaped Connector weldable Seamless Connector Jumper Connector (8 mm)

  • LED connector kits apply to 2835 3528 2-pin 8 mm LED lamp strip. Not suitable for 10 mm connectors.
  • 2 needles 8 mm LED connector support 0-4A current and 0-24V voltage input, heat resistance level is -20 to 100 degrees.
  • Note: When the waterproof LED is connected to the LED lamp strip, the silica gel on the surface of the weld region must be peeled off..
  • Easy to install. Connect the positive and negative poles of the connector. Simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes.
  • It is easy to install, according to the positive and negative connections of the connector, simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes..
Check Stock

Eastwood 200 AMP AC/DC TIG Welder With 1/4 Inch Thick Welding Capacity

  • Square-Wave Inverter for Accurate Aluminum Welding.
  • Rocker Style Foot Pedal with Machine Mounted Controls.
  • Stick Welding Feature - Welds in AC/DC Positive or Negative.
Check Stock

YaeTek 12PCS Oxygen & Acetylene Torch Kit Welding & Cutting Gas Welder Tool Set with Welding Goggles

  • Application - Welding and Cutting -- This YaeTek gas welding torch kit is used for cutting, welding, heating, with precision and efficiency..
  • Material -- heavy duty metal and brass, with high strength, durability, longevity. This welder torch Kit tool set is a great choice for both an amateur metalworker or a professional..
  • With a divisional box, convenient and easy to carry..
  • Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint, 1 wrench, 1 welding goggles, 1 storage box.
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Lenco 05335 International Dinse Type Machine Plug Adapter, Male and Female Connection

  • Welding cable quick connector male-female pair with accessories..
  • DINSE style connection. For AWG wires #6-#4 (16-25 sq mm) with 100Amp-200Amp current rating..
  • You get Two (2) quick cable connector pairs 100Amp-200Amp with accessories at this price..
  • Amazon satisfied customer service & fast ship.Please provide a deliverable address..
  • We are manufactory of welding accessories, if you need a large number of accessories. Please contact us!.
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф6)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock