Reviews Welding Grounding Cable Connector

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

iMBAPrice (Pack of 2 Single 2.5GHz F-Pin Grounding Block - Includes 2 Mounting Screws

  • Intended to ground incoming F-pin cables to your TV, VCR, cable box, cable modem, off-air antenna and more, while preventing a buildup of static electricity. It can also be used to protect your electronics from damaging lightning strikes and power surges..
  • Each end of the grounding block is specifically made to fit into a standard male F-pin coax connector..
  • A weather-resistant metal build is ideal for organizing and maintaining your audio/video network with quick access..
  • This grounding block can be used to prevent a buildup of static electricity at the point an F-pin coax cable enters the home..
  • Includes 2 screws for easy installation. The mounting screws are even individually wrapped in a small plastic bag to protect the grounding block from scratches..
Check Stock

PPC GBS81R 2.5GHz F-Pin (Coax) Grounding Block - Includes 2 Mounting Screws (1 Pack)

  • Intended to ground incoming F-pin cables to your TV, VCR, cable box, cable modem, off-air antenna and more, while preventing a buildup of static electricity. It can also be used to protect your electronics from damaging lightning strikes and power surges..
  • Each end of the grounding block is specifically made to fit into a standard male F-pin coax connector..
  • A weather-resistant metal build is ideal for organizing and maintaining your audio/video network with quick access..
  • This grounding block can be used to prevent a buildup of static electricity at the point an F-pin coax cable enters the home..
  • Includes 2 screws for easy installation. The mounting screws are even individually wrapped in a small plastic bag to protect the grounding block from scratches..
Check Stock

LDHTHOPI MIG Welder, 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder

  • ...rtable handle, it will be quite portable. Vary easy to install and store. It’s ideal for outdoor repairs, rusty metal, farm and road equipment, and maintenance, repairs and DIY..
  • 【Accessories Included】The LDHTHOPI MIG Welder package includes all welding equipment you need: 1 MIG welding torch with 2m cable.
Check Stock

LDHTHOPI MIG Welder 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder.

  • 【Easy Control Panel & 3 In 1】LDHTHOPI MIG welder machine has combo MIG (Gas/Gasless) MMA TIG welding mode. The welding machine has included with....
  • 【Advanced Technology】This DC inverter digital MIG welder voltage is 110V. Rated output current: 140 Amp. Output current range: 20-140A. Duty....
  • 【Safety & Protection】The MIG welding machine has a built-in automatic protection function for over-current, over-voltage and over-heating. The....
  • 【Compact and Portable】:The LDHTHOPI Welder Machine is true compact design. Lightweight machine body only weighs 10 lbs. And with a comfortable....
  • 【Accessories Included】The LDHTHOPI MIG Welder package includes all welding equipment you need: 1 MIG welding torch with 2m cable.
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ... for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 ....
Check Stock

Lenco 05335 International Dinse Type Machine Plug Adapter, Male and Female Connection

  • Welding cable quick connector male-female pair with accessories..
  • DINSE style connection. For AWG wires #6-#4 (16-25 sq mm) with 100Amp-200Amp current rating..
  • You get Two (2) quick cable connector pairs 100Amp-200Amp with accessories at this price..
  • Amazon satisfied customer service & fast ship.Please provide a deliverable address..
  • We are manufactory of welding accessories, if you need a large number of accessories. Please contact us!.
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 4 DKJ35-50 & DKZ35-50

  • TIG Welding Cable Panel Connector Socket Quick Fitting Dinse-Style, Rated Current: 315amp Wire Section: 35-50mm2 Socket Mounting Size:....
  • 1pcs : DKJ35-50 315A Euro Style Cable Connector-Plug(with Black Color).
  • 1pcs : DKZ35-50 315A Euro Style Cable Connector-Socket.
  • 1Pcs DKJ35-50 Euro Style Cable Connector-Plug (with Red Color).
  • 1Pcs DKZ35-50 Euro Style Cable Connector-Socket (with Red Color).
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock