Reviews Welding Corner Vice

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

ROADGIVE Upgraded Version 100W 110V Hot Stapler Plastic Repair Kit Car Bumper Repair Kit with Plier knife Flat/Outside Corner/Inside Corner/Wave Staples Welding Machine Plastic Welder Gun

  • ✅【PLASTIC WELDER KIT SPECIFICATIONS:】This welding repair tool set has a maximum power of 100W, 110V, for all Cars Hot Staples 0.6/0.8 mm. The hot stapler made of high quality ABS + Brass to prolong its service life..
  • ✅【FAST HEATING:】This plastic welding machine can quickly heat within 1-3 seconds. Our plastic welding repair kit is more efficient than most 50 watt welding machines and can quickly finish the repair project for you and save your time. The plastic repair kit has a safety overheating protection function..
  • ✅【EASY TO USE:】The plastic repair welder kit is easy and fast to operate. Staple weld into the plastics quick and easily to restore your broken parts. Strong for shock and twist after repairing..
  • ✅【UPGRADED DESIGN:】The rubber grip hand of the plastic fixing gun makes us feel comfortable and won't get tired of holding it for long time. Our plastic welder bumper repair kit is designed with LED lights to facilitate dark working environments..
  • ✅【What You Get:】 The plastic repair kit includes: 1 * plastic welding machine, 1 * utility knife, 1 * pliers, 1 * carrying case, 1 * English description, and also includes 100 * flat binding, 100 * outer corner binding, 100 * inner corner binding, 100 * Wave staples. Fit for t....
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

BELEY 110V 100W Plastic Welder Kit with 4 Types of 100PCS Staples, Car Bumper Repair Kit Hot Stapler Plastic Repair Tools with Pliers (Flat/Outside Corner/Inside Corner/Wave Staples) Red

  • 100W HIGH POWER: This plastic repair welding machine has 100w high power, which is faster than other low power welders to heat up to 932℉ in 4~5 seconds, saving your time with high efficiency..
  • ERGONOMIC DESIGNED：This plastic welding machine is lightweight and uses a spring switch, designed to fit perfectly in the palm of your hand. And a built-in LED light to help you precise welding in dim environments..
  • WIDE APPLICANCE: It is not only suitable for automotive plastic parts, such as, bumpers, dashboards, radiators, headlights, but also suitable for repairing cracks in most of the furniture made of plastic in daily life..
  • HIGH SAFETY: This welding kit comes with overheat protection function, will stop working after overheating, and can continue to work after cooling down..
  • PRODUCT LISTS: This plastic repair kit contains a hot stapler, a hard suitcase, a knife, a pliers and 4 types of staples, 100pcs of each type (0.03inches flat staples, 0.02inches outside corner staples, 0.03inches inside corner staples and 0.03inches wave staples). BELEY DIRECT provides 2 years warranty, which ensure your worry-free purchase..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • ... Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • Bending Forge Scrolling Welding Jig: Fits in 1 inch Hardy hole in an anvil or can be used in a vise. Perfect for making larger "S" Hooks, Bending Medium Stock, and Most any Scroll Work..
Check Stock

150W Plastic Welder, 2 in 1 Plastic Welding Kit Plastic Repair Welder 800PCS Hot Stapler Soldering Gun with 56PCS Plastic Welding Rods Car Bumper Repair Kit for Most Plastic Repair

  • 【150W Quick Heating】: The Plastic welding machine has a power of 150 watts, which is more powerful and heats up faster than other welding guns on the market. Using heat to embed staples or plastic rod into plastic, it will not harm the car and plastic surface, and it is very strong..
  • 【Upgrade Accessories】: Plastic weld kits are equipped with 6 types of 800pcs hot staples, 56pcs plastic rods(ABS/PP/PE/TPE/PC/PUR/PA) for different types of repairs. The plastic rods is used in conjunction with Patch Net to effectively repair plastic surfaces. Wipe with a sponge before and after repairing to make the surface clean and smooth..
  • 【Multi-purpose】: This welding repair kit can not only repair car bumper fenders, the equipped 7 types of plastic welding rods can also be used to repair various plastics such as ABS, PP, TPO, TPE, etc. Such as car dashboards, motorcycles, kayaks, canoes, children's riding toys, recycling bins and other plastic products. Using heat to embed staples or plastic rod into plastic, it will not harm the car and plastic surface, and it is very strong..
  • 【Humanized Design】: The non-slip rubber ....
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock