Reviews Welding Contact Component

AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

  • Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
  • Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
  • The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
  • The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD Soldered Electronic Learning Set

  • Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
  • Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
  • The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
  • The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Check Stock

The Horseman's Axe

  • 【】This is a two component heavy duty high temperature resistant epoxy glue with mayonnaise consistency. Capacity is 1.76oz, allowed thin application. Mixed ratio (1:1).
  • non-toxic and non-irritating odor. Can be used for boats, cars, fuel tanks, water pipes, heaters, vases, fence welding car bumpers and motorcycle crack repair. It is also very good cold welding glue..
  • 【 】5 minutes to set, 24 hours to fully curing, can be different materials welded together at the same time, such as metal aluminum, copper, iron, stainless steel, wood, plastic, glass, cured strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance..
  • 【 】Excellent impact resistance and strength helps to recover your car or boat cracks and holes. It is also suitable for repairing/fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, etc..
  • 【 】With its wide range of applications, excellent properties and almost ultimate cost performance, this epoxy glue can meet your needs in most usage scenarios at a very low cost and with guarant....
Check Stock

Soldering Practice Kit,3 Kits SMD SMT Weldering Skills Training Board(Soldering-All)

  • ✅3 SETS of SUPER VALUE.From easy to difficult SMD components soldering practice kit, high challenge PCB SMD welding skills competition..
  • ✅Professional skills, complete this kit, need a certain professional knowledge base, practical training experience..
  • ✅High quality material, high-quality double-sided spray tin FR-4 circuit board, easy to solder, not easy to oxidize, contribute to success..
  • ✅Technical support, including component list, circuit diagram, principle description and finished product diagram. Please contact us for information..
  • ✅Super quantity components: there are many kinds of components, nearly 20 different kinds of electronic components. There are more than 1400 solder joints and more than 500 components..
Check Stock

Metal Glue, 1.76oz 2 Part Liquid Metal Welding Epoxy Glue, Marine Filler Repair Putty, High-Temperature Resistant Heavy Duty ab Glue(3 pcs)

  • WHAT This is a two-component heavy duty high temperature resistant epoxy resin glue with capacity of 1.76oz for each(3 per pack), including a set of pusher, scraper and mixed ratio 1:1 syringe. It is a good nontoxic and nonirritating odor cold welding glue that can be used for boats, cars, Oil tanks, water pipes, heaters, vases, fences welding car bumpers, motorcycle crack repair..
  • WHAT IS IT CAPABLE OF 5 minutes to set, 24 hours to fully curing, can be different materials welded together at the same time, such as metal aluminum, copper, iron, stainless steel, wood, plastic, glass, cured strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance..
  • WHAT CAN BE USED FOR Excellent impact resistance and strength make if your car or boat has cracks or holes, then choose this epoxy resin welding adhesive is your best choice! It's also great for repairing/fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, and other everyday items..
Check Stock

Gikfun DIY SMD SMT Welding Practice Soldering Skill Training Board NE555 CD4017 Water Flowing Led DIY Kit EK1885

  • The circular circuit is the running water lamp circuit, which is composed of CD4017, NE555 and leds, which can be used to work after being welded..
  • Add 2pcs of QFP44 chip, double sided component layout, double welding..
  • High quality PCB, has clearly marked the electronics components, even beginners can easily solder successfully..
  • Please make sure all components in right direction and right place.
  • and check whether pseudo and float welding, this is very important in practicing....
Check Stock

Rustark 3 Pack Scratch Wire Brush Slag Removal Tool Kit With Welding Leather Gloves, 10 Inch Welding Chipping Hammer and Wirebrush, Welding Slag Removal Tool for Cleaning Removing Slag

  • 【What you Get】The welding slag remover set contains 1 pcs welding slag hammer, 1 pcs welding slag brush, 1 pairs welding gloves, totally 3 pcs. Full and convenient welding slay removal tool for you, saving your energy to looking for extra tool. In addition, offer reliable after-sale service.
  • Pls feel free contact us for any dissatisfaction. We will reply you within 12 hours for your satisfaction..
  • 【Welding Chipping Hammer】Made of durable high strength steel with multi-layer black powder coated for rust-resistance. Dual-head design with flat chisel on one end and point chisel on the other end, allowing it easier to use in tight and small space.The spring handle is designed to reduce the impact forces of contact. Coil Spring handle design for absorbing the shock of contact while cleaning and shipping way welding debris..
  • 【Steel Wire Scratch Brush】Made of solid stainless steel, wooden handle with pre-drilled hole for hanging, sturdy and durable, long service time. 252 mm in totally length, proper size for easier grip. Ideal for aggressive cleaning and removing rust and paint from most surfaces..
  • 【Protective Welding Gloves】 Made from thick and soft shoulder split natural cowhide leather with heat resistance,wear-resistance,puncture resista....
Check Stock

ARCRAFT Welding Gloves 14\

  • ♦ Leather Welding gloves feature a premium leather design for added, Unique stitching allows for optimal dexterity, Effective protection for hands and forearms from heat and welding sparks, Extreme high heat resistant,burning resistance,wear and tear resistance etc..
  • ♦ The inside of the gloves feature soft and sweat absorbent cotton liner for added softness and heat resistance for Superior safety, Great durability, Perfect comfort..
  • ♦ Heat resistant: contact with hot coals or embers avoid burns, Puncture resistant and cut resistant: contact with grinding debris or sharp objects, not easy to wear out. Provide the most extreme heat protection to handle high heat hazard jobs, fire resistant, oil resistant..
  • ♦ Not only for welding but also useful for other high temperature works and home tasks: Grill, Barbecue, Stove, Oven, Fireplace, Cooking, Pruning flowers, Gardening, Camping, Campfire..
  • ♦ Please feel free to contact us if you have any questions during use our products. We are providing full range professional welding products, please check our shop to get yourself ready for an efficient & safe welding..
Check Stock