Reviews Welding Clamps Table Mounts

QISF 6 Pcs Magnetic Welding Head, Welding Ground Clamp, Magnetic Welding Support,Strong Magnetism Large Suction,Copper Tail Welding Stability Clamps(2 Sets)

  • 【Feature】-- This magnetic clamp is easy to attach to any smooth metal surface, flat or curved.Strong magnetic grip which can make you welding Work more easy and simple..
  • 【Convenient work】-- Undamage the surface or car's paint,this magnetic clip is very convenient..
  • 【Wide Fits】-- The clamp can also be attached to metal poles, struts, railings or the welding table..
  • 【Material】-- Copper / Insulation Board.
  • 【Package】-- 1Pcs Single Head Magnetic Welding Ground Clamp.
  • 1Pcs Double Head Magnetic Welding Ground Clamp.
  • 2Pcs Copper Tail Welding Stability Clamps.
Check Stock

Strong Hand Tools, Nomad, Steel Welding Table, Three 1.1″ (28mm) Tabletop Slots, Adjustable Angle & Height, Casters, Retractable Guide Rails, Eccentric Leveling Foot, TS3020, Black

  • Three 1. 1″ (28mm) slots in the tabletop allow for insertion of clamps to reach any point on the table..
  • Tabletop tilts to three positions: Horizontal, 30°, and folded for mobility..
  • Two retractable, perpendicular steel guide rails can be used as guides, stops, or clamping edges..
  • Affordable, convenient welding and work table for the welding shop or home shop.
  • Tabletop height can be adjusted from 26″ to 32″ (660 – 810 mm)..
  • Table moves about the work area on 2 sturdy casters..
Check Stock

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

  • Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
  • Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
  • Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Including 1pc Single Head Magnetic Welding Ground Clamp.
  • 1pc Double Head Magnetic Welding Ground Clamp.
  • 1pc Copper Tail Welding Stability Clamps..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

Magswitch MagSquare 600 Magnetic Welding Square Base Clamp Holder for Welding Kit, Tools, Supplies and Accessories, Magnet Switch with On/Off Capabilities, 600 lb Holding Force

  • MAGSQUARE 8100106: Hold and set just about anything, just about anywhere. With 607 lb strong holding force. These magnetic squares are the most versatile workholding and fixturing tool ever! Align and secure flat or round tubing pieces of steel to fabricate multi-angle holds.
  • WELDERS HELPER: Our welding & heavy fabrication tools are engineered to drive productivity for professional welders, fabricators and pipefitters. Large sheet leveling, sheet de-stacking, fixturing, weld grounding, mounting, metalworking, notching, workholding, positioning, alignment, spatter, fitting and many more applications are performed significantly faster.
  • ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Use it with tig, spot, stick torch, fiber, arc welders. Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning.
  • ENDLESS BENEFITS: Multiplane magnetic grip on 5 sides, pre-tapped holes for mounting. No electrical power source needed. Pull corners, secure steel sheets for cutting, use as a guide or make your own fixtures. A must for any welding table or cart.
  • EASY TO CLEAN: Powerful Magnet stays clean unlike traditional magnetic squares that hold ....
Check Stock

50 Pcs Black Cable Tie Base Saddle Type Mount Wire Holder, Cable Zip Ties with Self-Locking 6 Inch & 0.145 Inch,#8 x 0.6 Inch Deep Thread Pan Head Screws Black

  • This cable tie mounts are made of high quality nylon material,which is light weight, good insulation aging..
  • These cable tie mounts are black color that can be easily concealed for a neat appearance..
  • Our wire cable tie mounts can be used anywhere for wire management and cord organization..
  • This cable tie mounts are perfect for your home, work, school, office or anywhere clean looking wiring is needed..
  • Our plastic cable tie mounts can be used with wire management clips, electronic cord organizer, throttle cable clamps, marine cable clamps, stainless steel cable clamps, or anywhere clean looking wiring is needed!.
Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

  • 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
  • 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
  • 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
  • 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.
Check Stock