Reviews Welded Metal Panel

Hopesun Decorative Garden Fence Fast Installation Multi-Purpose Metal Pet Fence Kit Outdoor

  • 【HEAVY DUTY & STURDY】: This metal garden fence border is tall fencing with single panel size of 44” high x 36” wide, 8 panels in total, the whole length 288 inches long. It is made of Hot galvanized and powder coated and thick welded wire to be a pretty HEAVY-DUTY, sturdy and durable metal garden fencing for your beautiful garden, yard, and patio..
  • 【RUSTPROOF & DECORATIVE】：Premium decorative garden fence panels with black powder-coated finish to be rustproof and durable for outdoor use. The rustproof coated garden fence is welded with thick wires and it is an architectural structure that is durable and sturdy..
  • 【EASY TO ASSEMBLE】: It is easy and fast to install with step-by-step instructions. Insert the assorted stakes into the ground. It can be installed in a variety of configurations to meet your multiple needs..
  • 【MULTI PURPOSE】：Perfect to be used as outdoor garden fence, metal garden fence animal barrier, tree fence, vegetable garden fencing, path edging fence, garden border fencing, folding fencing, patio landscape fencing garden, fencing for dogs, yard fence, patio fences flower bed section and more..
  • 【CUSTOMER CARE】: We offer premium products for you while exceeding the highest industry standards and offer though....
Check Stock

CENSI Modern French Oak Coffee Table Ottoman for Living Room, Square Industrial Vintage Wood and Metal Cocktail Center Table (30 inch, Gray Wash)

  • Extra Thick and Eco-Friendly Wood Top - Top panel is made of 1.2"/30mm made of premium MDF material, honeycomb structure inside. Eco-friendly and no worry about the formaldehyde emissions, High quality and durable.
  • Durable Metal Frame - Excellent welded 20x20mm metal frame provides a stronger structure, no bending and no wobbly.
  • 3D Gray Oak Finish - Top panel is with grey-wash oak veneer, cool looking.
  • Minimalist Design - Simple design and easy to be assembled. adjustable feet allow slightly adjustment to fit some uneven ground surface..
  • PRODUCT SIZE: W30" x D30" x H15.7" / W762mm x D762mm x H400mm.
Check Stock

55 Gallon Large Capacity Gateway Barbecue Drum Smoker - Flat Black

  • Good for BBQ pits trailers , custom metal projects , Custom Built Grills, Smokers, Pits, Wood Stoves,cabinets,etc.
  • weldable 1/2" steel rod (pre mounted spring).
  • Confirm the thickness of the door panel and the size of the opening. It can also be welded..
Check Stock

9 Pieces Spot Weld Cutter, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tools

  • HIGH EFFICIENCY: The high efficiency steel welding drilling tool fittings is designed with double-sided blade, so it works with high efficiency..
  • WORKING WITHOUT DAMAGING PANEL: Spot welded or metal plates can be removed without distorting the metal or damaging the underlying panel..
  • DURABLE LONG SERVICE TIME: The spot weld cutter is made of high quality steel material, which promises a durable working time..
  • LIGHTWEIGHT AND PORTABLE : The professional design and reasonable structure, make it easy to replace and install, without too much efforts..
  • WELDS PROTECTOR: The product can meet your needs to reduce prying and damaging to welds, you can use it with less worries about the welds broken..
Check Stock

KKoneAuto Slip-On Metal Rocker Panels & Cab Corners Compatible with 1999-2007 Chevy Silverado GMC Sierra 4 Door Crew Cab (2 packages)

  • BUILT TO LAST: This rocker panels are constructed of heavy gauge stamped steel that meets or exceeds the thickness of the original body panel that it’s replacing,ensures its long time use and delicate appearance.Gives your vehicle a new style and appearance. Welded one piece design for extreme durability.Its hard steel structure has been tested and inspected many times, made to strict quality control standards, please rest assured to buy.
  • EXPERTLY MADE: You can rest easy knowing your Rocker Panels will fit your Chevy Silverado perfectly.The rockers are die-stamped,the stamping process starts with a 3D scan of an OEM part, which means that these aftermarket panels will be an exact match to the original part’s shape.
  • BENEFITS OF ROCKER PANELS: Designed as stamped pieces made with solid metal, the rocker panel is a part of the car’s structural body. Though they may look non-important and straightforward, rocker panels are essential. You could say that rocker panels hold the back and front of the car to keep them from coming apart.
Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates..
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck..
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

Merax High Gloss Modern Minimalist Design 31.5 x 31.5 inch 2-Tier Square Coffee Table with Plug-in 16-Color LED Lights for Living Room, White_2

  • Extra Thick and Eco-Friendly Wood Top - Top panel is made of 1.2"/30mm made of premium MDF material, honeycomb structure inside. Eco-friendly and no worry about the formaldehyde emissions, High quality and durable.
  • Durable Metal Frame - Excellent welded 20x20mm metal frame provides a stronger structure, no bending and no wobbly.
  • 3D Gray Oak Finish - Top panel is with grey-wash oak veneer, cool looking.
  • Minimalist Design - Simple design and easy to be assembled. adjustable feet allow slightly adjustment to fit some uneven ground surface..
  • PRODUCT SIZE: W30" x D30" x H15.7" / W762mm x D762mm x H400mm.
Check Stock

14-Pack Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size..
  • Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when 1 side gets dull you simply have to flip the bit around on its arbor assembly..
  • Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal..
  • Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets..
  • Spot Weld Cutter Tool：Easy to replace the blades when it begins to dull..
Check Stock

Kate and Laurel Roycen Modern Narrow Geometric Shaped Metal Accent Wall Mirror, 42 x 10 Black

  • The Roycen decorative wall mirror with its metal framed geometric shapes and bold finish will add a touch of artistic sophistication to your home decor.
  • Three sleek metal hexagons are lined up together in this modernly designed accent mirror. It will look fantastic hanging in an entryway, hallway or any wall that needs a bit of pop.
  • Display dimensions are 42 inches high by 10 inches wide - just the right size for as a statement piece or a great way to artistically break up a gallery wall.
  • The accent mirror's frame is constructed of a solid, durable metal with a D-ring hanger welded securely to the top for easy wall display.
  • The metal frame and thoughtful design create a modern shaped mirror that can be displayed artistically on its own or hang more than one together for a beautiful panel look and an affordable way to decorate your wall while bringing light and space into the room..
Check Stock

HON Metal Bookcase - Bookcase with Two Shelves 34-1/2w x 12-5/8d x 72h Black H

  • An efficient, space-saving storage solution, from HON-America's filing and storage leader.
  • Adjustable shelves with formed-in reinforcements on all four sides.
  • Welded construction far outlasts the build-it-yourself construction of most similar cabinets.
  • Clean, straightforward design complements panel-based workstations and metal desks.
Check Stock