Reviews Welded Clamps

DynoMax 39510 Stainless Steel Exhaust System

  • COMPATIBILITY -- Designed for Jeep Wrangler JK.
  • see product information for compatibility and engine specs.
  • PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
  • COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
  • EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
  • IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
Check Stock

Kyostar 2\ T-Bolt Hose Clamp Adjustable Stainless Steel Titanium Blue Clamp Diameter Ranger for 2 inch (53mm - 61mm)

  • Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • The band of stainless steel t-bolt clamps are 0.6mm thick, and 19mm width rounded edge, which won’t damage the hose or pipes..
  • T-Bolt Clamp effective range: 45 millimeter-105 millimeter can adjustable (1.75 inch-3.75 inch)..
  • Superior welded construction, Floating bridge liner..
  • Note: If used this t-bolt hose clamps for industrial and military hose or pipes, please measure the outside diameter of them before purchase..
Check Stock

YAKIMA LockNLoad Crossbar Clamps for Roof Rack Systems Set of 2

  • Attach LockNLoad: These crossbar clamps allow you to attach the LockNLoad platform to an existing roof rack.
  • The LockNLoad platform requires 2-3 sets....
  • Durable design: Made with a strong welded steel construction and features rubber pads to protect crossbar finish.
  • Carrying capacity: Each set of crossbar clamps adds 110 lbs of weight capacity up to 330 lbs.
  • Never exceed the Yakima- or manufacturer-specific weight....
  • Compatible: Works with all Yakima crossbars, factory crossbars, other aftermarket crossbars or 2” round or square tubing.
  • We’ve got your back guarantee: Covered by our Limited Lifetime Warranty.
Check Stock

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • ...pping: Our hose clamp band material is thick and non-perforated. The other typical 1" hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. Our screws are much bigger and with deeper threads that grip the embossed band tightly. The buckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of the hoses)..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1-1/8\ ID hose, Range: 1.38\ - 1.57\ (316-SSTC-35-40)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 38" - 1. 57" (35mm-40mm).
  • Rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1.25\ ID Hose, Range: 1.5\ - 1.69\ (316-SSTC-38-43)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 5" - 1. 69" (38mm-43mm).
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 196, fit 6.75\ ID Hose, Range: 7\ - 7.31\ (316-SSTC-178-186)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 7" - 7. 31" (178mm-186mm). SAE # 196..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 68, fit 2.75\ ID Hose, Range: 3\ - 3.31\ (316-SSTC-76-84)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 3" - 3. 31" (76mm-84mm). SAE # 68..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 108, fit 4\ ID Hose, Range: 4.25\ - 4.57\ (316-SSTC-108-116)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 4. 25" - 4. 57" (108mm-116mm). SAE # 108..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 188, fit 6.5\ ID Hose, Range: 6.75\ - 7.06\ (316-SSTC-172-180)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 6. 75" - 7. 06" (172mm-180mm). SAE # 188..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock