Reviews Weld on Barrel Hinges

Bobco Metals Steel 5\ Barrel Gate Hinges for Heavy Gates & Doors - Welding on Larger Iron or Steel Gates Up to 450 Pounds - Grease Zerk Fitting - Steel Barrels & Copper Pin - 2 Units

  • 5" Barrel Gate Hinges are perfect for mounting a wide variety of gates and doors. Each hinge has four parts: 1 male barrel, 1 female barrel, steel ball and grease zerk fittings. The hinges with attached welding plates are made from steel. The hinge pins are high quality copper..
  • Each hinge set measures 5" long and 1" wide. The height of the hinge is 1.25". Each welding plate measures 1.94" long and 1" wide. The thickness of the plates is 0.375"..
  • Easy to Mount - these barrel hinges are easy to attach to your gate or door and the mounting posts. Clearly defined mounting plates make it easy to know how far along to weld. They are also easy to use with spacers to allow gates or doors to open as far as the post will allow. All hinges come pre-painted black, but are easy to repaint if you prefer a more neutral shade..
  • Each pair of barrel gate hinges holds up to 450 pounds. They are perfect solutions for driveway or security gates, swinging security doors, trailer gates, and more!.
  • Hinges slide apart easily if you need to temporarily remove the gate or door, and slide back together just as easily..
Check Stock

Heavy Duty Gate Hinges 5 Inches - 2 Pack Black Iron Door Hinge Barrel Style 450 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 5 inch, barrel diameter is 1 inch, back plate width is 1 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 450 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges.
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

Heavy Duty Gate Hinges 7 Inches - 2 Pack Black Iron Door Hinge Barrel Style 900 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 7 inch, barrel diameter is 1.25 inch, back plate width is 1.25 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 900 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges..
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

3 inch Steel Bullet Hinge with Zerk Grease Fitting and Bushing - Weld on for BBQ Smoker Pit Lid Door Tailgate Gate or Fence

  • ✅ 【3 INCH SIZE】3" weld on bullet hinge for BBQ Smoker pit doors and lids, truck tailgates, fences, gates, etc..
  • ✅ 【INCLUDES】Steel with zerk fitting (grease fitting) - Includes Brass Bushing.
  • ✅ 【PREMIUM QUALITY】Heavy duty housing and thick steel center pin.
  • ✅ 【WELD ON】Use 2 or more barrel hinges per application..
  • ✅ 【MULTIPLE USES】BBQ smokers, gates, automotive tailgates, etc..
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

CTW (4) Trailer Ramp Door Hinges/Weld On / 1' x 10' / Grease Fitting / 9 ga. Steel

  • (4) 10 inch x 1 inch Raw Steel Weld On Trailer Ramp Door Hinges . Integrated Grease Fitting ..
  • Raised Center Portion With Steel Wrap . Center Shank Measures Approx. 3 3/4 inch ..
  • Heavy Duty Steel Hinges for Weld On Applications ..
  • Hinges are 10 inch Long with Raw Steel Finish . 7/16 inch Pin Diameter. 9 Gauge Steel ..
  • Commonly Used For Trailer Ramp Door Hinges ..
Check Stock

Heavy Duty Gate Hinge Pair 7 Inch Barrel Style Good Load Capacity - Weld On Install (7 Inch)

  • ...L ( 2 pairs) x 1.4 inch H, 900 lbs capacity per pair, the thickness of the plates is 0.3”..
  • ✅ MULTI- SOLUTION: suitable for many kinds of big and heavy gates: driveway gate, metal gate, trailer gate, swing gate, etc. It can prevent the gate from sagging and hold them more stable..
  • ✅ FULL PACKAGE: include 1 male barrel, 1 female barrel, steel ball, and grease zerk fittings..
  • ✅ EASY ASSEMBLY: good base to weld on. Before welding, you need to remove the paint covering hinges, however, after that, you can paint and this will keep these hinges from rusting and use for a long time. You will see a steel ball bearing and that is what the pinned side of the hinge rides on. There is a nipple that is for applying grease to keep things smooth..
  • ✅ YOUR SATISFACTION is our priority: If you are not completely satisfied with your purchase, please let us know and we will refund your money, no questions asked. Please let me know if you need any additional information, we will find the best solution for your need..
Check Stock

D&D Technologies TCHDMA1 Multi-Adjust Heavy Duty Gate Hinges, for Self Closing Wood and Vinyl Gates up to 132 Pounds, 3-Way Adjustable, Gap up to 1 3/8", Black, 2 Count

  • 900LB Capacity per hinge - Ball Bearing With Grease Zerk Fitting LISTING IS FOR 2X COMPLETE GATE HINGE SET.
  • The hinges are precision machined from high strength, solid cold roll steel bar. They are fitted with ball bearing for extra smooth easy operation..
  • Unlike ordinary hinges that will seize up fail to work due to age and weather conditions, these will always operate like new. Zerk fitting for adding grease makes for hinges that will last a very long!.
  • SPECIFICATIONS: -Weight capacity per hinge: 900 lbs -Hardened, heat treated cold rolled steel. -Precision Machined -Ball Bearing -Zerk fitting for greasing -Welding Tabs -J Bolt length is 7-1/4" -3/4" J-Bolt with Zinc Plated Nuts and Washers -Barrel is 4-5/8" by 1-9/16" -Powder coated.
  • Includes: -2x Heavy Duty Steel Hinge Set - 3/4" J-Bolt style with weld tabs - Ball bearing and zerk fitting for grease.
Check Stock

Weld-On Hinges 1Pair

  • Delivered in a thin layer of oil to protect from rust during shipping. This ensures you receive the product at its best state.
Check Stock