Reviews Weld On 3

3/4" Bore Weld on Hub for X Series (Diameter 2" w/ 3/16" Keyway) Farmer Bob's Parts WSH30012

  • 3/4" X-Series Weld on Hub Round Bore w/ Keyway Set Screw Meets ASTM/ANSI Standards B29.62 Fits X Series Weld Sprocket with 2" Diameter Hub for Sprocket Keyway 3/8 X 3/16".
  • 00030012, 20030012, 971-20030012, WSH30012, X3/4.
Check Stock

Byenins Large Slotted Universal Magnetic Jack Pad Weld Frame Rail Adapter Orange for All Model Cars

  • This jack pad is to fit the weld on most uni-body vehicles so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel..
  • There are 2 Neodymium rare earth magnets so that the supreme holding strength while placing jack and lifting vehicle..
  • Fits most pinch weld that is at least 3 inches. The opening of each slotted jack pad is 0.385" wide by 3" in length. Slot depth is 0.63". Base....
  • CNC machined from Billet Aluminum and anodized,a soft nylon insert to protect pinch weld.- Many colors available:Red,Orange,Blue.
Check Stock

J-B Weld 50151 WoodWeld Epoxy Syringe - Light Tan -.85 fl. oz.

  • J-B WELD WOODWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on wood surfaces J-B Weld WoodWeld is perfect for DIY wood repair and wood projects by creating a bond stronger than wood J-B Weld WoodWeld now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, WoodWeld takes 6 minutes to set and 1-3 hours to cure J-B Weld WoodWeld set and cure color is light tan.
  • STRENGTH: J-B Weld WoodWeld has tensile strength of 1800 PSI.
Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates..
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck..
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
  • WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
  • EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
  • DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
  • APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock

Forney Easy Weld 29801 100ST Welder Start-Up Kit, Welding Starter Kit

  • KIT INCLUDES: a Forney Easy Weld 100 ST Welder, auto-darkening welding helmet, 3/32” steel electrodes, 4-1/2” Type 27 metal/steel grinding wheel, wire brush, driver gloves and a pair of welding gloves.
  • PERFECT FOR BEGINNERS: This kit is portable, and user friendly making it ideal for novice and beginning welders. All Forney Easy Weld machines come with a quick start guide to get you welding right away..
  • POWERFUL: The Forney Easy Weld 100 ST is small but mighty as it is able to weld up to 1/4" of mild steel. Also features 120-volt input and 90 AMP output..
  • LIGHTWEIGHT: The machine only weights 9. 65 lbs. , allowing you to take your machine to your project rather than hauling your project to your machine! This reduces the risk of damaging whatever it is you're working on..
  • CLICK ON THE (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Fivepine 4pc 3/8in Weld On Tractor Bucket Grab Hooks Grade 70 Weldable Chain Hook

  • 【Grade 70 heavy steel】 Working load limit is 6600 lb. Heat treatment makes the hook more durable and tough..
  • 【Easy to Solder】The bottom edge of the grappling hook is beveled, easy to weld to any surface or body..
  • 【Multifunction】Grab hooks work well with chains and ratchet binders for securing your load. can be welded on tractor bucket, truck bumper, Forklift..
  • 【Widely Used】Weld-on hook can be used for lifting heavy objects, port transportation, farm work, construction site construction and other fields..
  • 【Package】Include 4pcs 3/8 inches weld-on hooks.
Check Stock

8X Extra Heavy Duty 1/2 D-Rings with Weld On Anchor Points for Your Trailer Truck Cargo RV Auto Hauler ATV Tiedowns Farm Applications and More! - 4,000 lbs Working Load Limit

  • 8-PACK Extra Heavy Duty D-Rings with Weld-On Clips - 4,000 lbs Working Load Limit.
  • Weld On Anchor Points for your Trailer, Truck, RV, Auto Hauler, ATV Tiedowns, Farm Applications and More!.
  • 1/2" Diameter Forged Steel D-Ring Assemblies with Weld-On Attachment Clips.
  • Offers a Secure Attachment Point When Hauling your Cargo..
  • Dimensions: 1/2" Diameter x 3 1/4" Wide x 3 1/2" High.
Check Stock