Reviews Weight Of Machine 1100kg

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

ADJ Products VF 1300 1300W Compact Value Fogger

  • 1100W mobile Fog Machine High efficiency heater block burns through fog with less residue Electronic Thermo Sensing (ETS) for optimum heating levels.
  • Low fog fluid shut off sensor to protect pump Warm-up time: 7 minutes Output: 12,000 cubic ft. per min.
  • External fog fluid tank: 2.3 Liter Includes ADJ VF113R wired remote ADJ VFWR1316 Wireless remote control sold separately.
  • Fog output switch on rear panel for manual operation.
  • Only use high quality, water-based fog fluid recommended fluid is the F4L Premium, F4L Eco, or F1l Premium..
  • Dimensions (LxWxH): 17.5” x 12.5” x 8” / 445x315x200mm Weight: 15 lbs. / 7 kg..
Check Stock

2KG Gold Melting Furnace 1150℃ /2102 ℉ Automatic Digital Melting Furnace Machine with Graphite Crucible for Precious Metals Gold Silver Jewelry,1400W

  • 【2KG Compacity】2kg CRUCIBLE capacity.
  • 【Work Efficiently】The furnace wire seal integrated machine can be heated and heated quickly.Inner temperature can Be 1100℃, because of which metals could be melted completely in 40-48 minutes..
  • 【Advanced Digital Control】Highly advanced PID module and digital control system,providing you precise and convenient metal melting,avoiding any issue of overheat or cool down..
  • 【Work Safety】The melting crucible comes with a melting tongs that fit into the groove around the crucible head, which allows you to work safely with the hot melt crucible..
  • 【The Warranty Time】 12 Months.We offer you the Best & Professional service, if you have any questions, please contact us firstly, we will always help you. And If our products have any problem, we promise help you within 24hrs..
Check Stock

GONGYI 6KG Melting Furnace Kit GMF600 Smelting Quickly Made by Full Stainless Steel 304 for Scrap Metal Recycle Gold Copper Aluminum Includes Crucible,Tongs, Ingot Mold and Carry Bag

  • 【Perfect 8-in-1 Siamese Casting Machine】2L,CFM: 3, Hp: 1/2, Acrylic Bell Jar: 9" Diameter x 8" High,2kg high purity graphite crucible,Rubber Pad, Hose,steel bell set,Pliers,Maximum temperature: 1100℃,Available Voltage: 110V.
  • 【Vacuum Hood & Built-in Fuel Tank】The vacuum hood made of thick aviation plastic is beneficial to reduce the burrs and bubbles produced. The built-in refueling device is installed to adjust the refueling amount by referring to the standard line..
  • 【Accurate Pressure Gauge】Monitoring the current pressure helps you make relevant adjustments as needed to create a smooth surface. The cover shell made of metal features good durability..
  • 【Smelt Quickly】The Gold Melting Furnace wire seal integrated machine can be heated and heated quickly.It can be heated up to 1100 ° C and can melt metals with melting point below 1100 ° C in 48 Minutes. Suit for making gold nuggets, ingots or jewelry, smelting recycling scrap, refining jewelry, casting all kinds of fast-melting metals, including gold, silver, lead, copper, brass, bronze, aluminum, etc..
  • 【Versatile Use】 With a wide variety of applications, the casting machine is ideal for jewelry processing factories and artwork manufacturers to make high-density, pretty jewelry..
Check Stock

1100 LB Mini Scissor Lift Jack ATV Motorcycle Dirt Bike Scooter Crank Stand

  • Material : Alloy Steel,Max.Capacity:1100lbs(500kg),Color: Red..
  • Max Height: 15-3/4”(40cm),Min. height: 3-3/4”(9.5cm).
  • Platform Size: 17-23/32” ×5-29/32”(45cm×15cm).
  • Net Weight: 31.2lbs(14.2kg),6" removable crank handle Wide Base..
  • Package include:1×Scissor Mini Lift,2×Adjustable Plate,1×Handle..
Check Stock

CPROSP Scissor Jack 2 Tons(4,409 lbs) Capacity with Ratchet Handle Effort Saving

  • ADJUSTABLE HEIGHT: The height of the motorcycle lift jack can be adjusted to meet your specific needs. And its minimum height is about 6.7” (saddles installed) and its maximum height is about 15.75”..
  • 1100LBS WEIGHT CAPACITY: With main frame made of steel, the motorcycle lift stand can support up to 1100lbs. And its own weight is about 14kg/30.9lbs..
  • SAFETY PIN FOR EXTRA SECURITY: The motorcycle lift jack is designed with a safety pin which can reduce the possibility of falling down during use and provide extra safety..
  • ADJUSTABLE SUPPORT SADDLES: The position of the support saddles can be adjusted horizontally by loosing and tightening screws on them. You can adjust the support saddles based on your needs..
  • SIMPLE OPERATION: To use the item, just install the support saddles, attach the handle to to lift stand and then rotate it to adjust the height to your desired height. ( It is suggested to wear gloves when operation.).
Check Stock

CPROSP Scissor Jack for car/SUV/MPV (4400 lbs / 2T Load), Just for Tire Wrench

  • ADJUSTABLE HEIGHT: The height of the motorcycle lift jack can be adjusted to meet your specific needs. And its minimum height is about 3.94” and its maximum height is about 14.2”..
  • 1100LBS WEIGHT CAPACITY: With main frame made of steel, the motorcycle lift stand can support up to 1100lbs. And its own weight is about 13kg/28.7lbs..
  • SAFETY PIN FOR EXTRA SECURITY: The motorcycle lift jack is designed with a safety pin which can reduce the possibility of falling down during use and provide extra safety..
  • ANTI-SLIP TOP PAD: Anti-slip rubber top surface of the motorcycle lift jack can help it hold motorcycle more stably and also reduce the possibility of scratching your motorcycle..
  • SIMPLE OPERATION: To use the item, just attach the handle to to lift stand and then rotate it to adjust the height to your desired height. ( It is suggested to wear gloves when operation.).
Check Stock

TOAUTO Upgraded Gold Melting Furnace TGF3000-V1.1, 1+3 KG Electric Digital Smelting Furnace 1400W 2100F PID Smelter Kiln Kit Casting Refining Jewelry Precious Metals Gold Silver Copper Aluminum (110v)

  • 【PROFESSIONAL & WORK EFFICIENTLY】TOAUTO 1400W electric furnace can be heated up to 1100 °C / 2000°F and can melt metals with a melting point below 1100 ° C in 40-55 Minutes such as gold, sterling silver, pure copper and aluminum. Implanted in the highest-end precision PID temperature control program, the machine can monitor and correct the actual temperature. With only 4 buttons on the control panel and an easy-to-read Digital LED display. It’s just good for new players to skilled experts!.
  • 【IDEAL 7-IN-1 SMELTER KILN KIT】Comes with the parcel is TOAUTO TGF3000-V1.1 version gold furnace machine / one 3kg graphite crucible / one 1KG graphite crucible /one coin graphite ingot mold/one forceps /one heat-resistant gloves/one power cord/ one Instruction manual. This smelting furnace is not only ideal for professional use of the industry and the workshop, but also a good melting helper at home..
Check Stock

Rome RM2345 Brass Father Time Sundial with Verdigris Highlights

  • The Sundial is made of Premium Grade Brass & copper.
  • and the Sun Dial comes with a gift box, made of Leather.
  • The dimensions of the Brass Sundial are : 3.54 x 3.54 x 1.38 inches.
  • & the weight of the sun watch is 0.280 kg (0.594 Pounds).
  • Beautifully crafted solid brass pocket sundial compass with high quality polished finish on Brass & Natural Finish on Copper. Portable design, convenient to carry. Valued as decorative objects, literary metaphors, and objects of mathematical study..
  • Nautical collectors, enthusiasts, and seafarer alike will love this stunning brass Sundial Compass. As a perfect present, this Sundial Compass for sale is a gleaming recreation of the classic antique compass that have guided sailors since the 1100s.
  • As a perfect present, this Sundial for sale is a gleaming recreation of the classic antique sundials that have guided sailors since the 1100s.
Check Stock

Brass Nautical - Sundial Compass with Intricate Detailing Comes in an Exquisite Top Grain Leather Case - Premium Sundial Compass

  • The Sundial is made of Premium Grade Brass and the Sun Dial comes with a leather gift case..
  • Beautifully crafted solid brass pocket sundial compass with a rich, shining brass finish. Portable design, convenient to carry. A valued as decorative objects, literary metaphors, and objects of mathematical study..
  • Compass Size & Weight:- 7.5cm - Dia x 3cm - Thick, 0.140 kg.
  • Leather Case Size & Weight:- 9.5cm - L x 8cm - W x 4.5cm - H, 0.40 kg.
  • Nautical collectors, enthusiasts, and seafarer alike will love this stunning brass Sundial Compass..
  • As a perfect present, this Sundial Compass for sale is a gleaming recreation of the classic antique compass that have guided sailors since the 1100s..
Check Stock