Reviews Weight Machinery

Centerforce N1747 Centerforce ® Accessories, Throw Out Bearing / Clutch Release Bearing \88 Buick Century 2.8L ( 173 ci )\

  • Mainly used for textile machinery, printing machinery, automotive industry, household appliances and more..
  • Enough room for grease to store with a longer relubrication interval..
  • High quality bearing steel, durable with high hardness..
  • Hard bearing steel with strong bearing capacity, not easy to deform..
  • Ensure that the clutch can be smoothly engaged, soft to disengage, reduce wear, and extend the life of the clutch and the entire driveline..
Check Stock

36774321 Drive Coupler for Ingersoll Rand Doosan Portable Air Compressor Replacement Part Flexible Coupling Slotted Disc

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Belimo | Z3075Q-J+CQB24-3 | ZoneTight | 0.75\ | 3 Way | 5.9 Cv | w/ Non-Spg | 24V | On/Off/Floating

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

Heyiarbeit 10mm to 10mm Shaft Coupling Aluminium Flexible Plum Coupling D30 L35 Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • [Technical Parameter] Shaft Usage: 10 mm / 0.39" to 10 mm / 0.39".
  • Total Size: 35mm x 30mm / 1.38" x 1.18" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

M18 Cordless 2-Speed Grease Gun Kit - No. 2646-21CT

  • EXCELLENT POWER:The Cordless Grease Guns Powered with 20-volt motor delivers 12000 PSI max operating pressure, pushes up to 5.0 oz/min high-flow applications..
  • Multifunctional Electric Grease Gun: This electric grease gun both barreled oil and cartridge lubricants can be used, which makes the oil easy and convenient to use..
  • Large-capacity Battery: This electric grease gun with a 3000 mah large-capacity rechargeable lithium battery, which can work continuously for 30-40 minutes when fully charged. It takes 2-3 hours to fully charge the battery..
  • LIGHTWEIGHT:This electric grease gun is labor-saving, fast, easy to operate, small in size, light in weight, It also has a carrying case, which is very easy to carry and store..
  • Wide Application: This electric grease gun is widely used in motor vehicles, heavy machinery, ships, automobiles, mechanical equipment, agricultural machinery, engineering vehicles can all be oiled and maintained with a powered grease gun..
Check Stock

TFCFL 4 Stroke 196cc Diesel Engine, Air-Cooled Single Cylinder Start Engine Gas Power Gasoline 2.2kw

  • 【6 HP 4 Stroke 196cc Diesel Engine 】This commercial air-cooled diesel engine are the perfect small engines to power the equipment you use to maintain small agricultural machinery fields or home and yard.It can provide powerful torque and high RPM speed. Meet industrial quality standards and provide reliable performance..
  • 【Portable and Durable 】Compact structure, small size and light weight.Compared with gasoline engines, it is more economical and lighter than horizontal axis diesel engines.Optimize the fuel system and intake and exhaust systems to save energy and fuel..
  • 【Main Prameters 】Our 4Stroke 196cc Diesel Engine has a max output power/speed of 2.2KW/3000 rpm,portable size:15.55*12.01*14.21 inches,product weight:44.09 pounds,Shell material is made of aluminum,start method: manual start,easy to use .Large capicity:Fuel tank capacity (L): 3L,Engine oil capacity: 0.7L.
  • 【Advantages 】Reliable and durable, with an overhead cam design that offers cooler, fuel-efficient operation. Through advanced software analysis and optimization design, the reliability of the diesel engine in terms of structure and cooling i....
Check Stock

2Pcs 6000-2RS Bearings 10x26x8mm Ceramic Miniature Ball Bearing ZrO2 Deep Groove Race Ball Bearing

  • ...han that of steel, it is not easy to deform when subjected to force, so it is conducive to improving the working speed and achieving higher accuracy..
  • 【Broad scope of application】Widely used for medical apparatus and instruments, cryogenic engineering, optical instrument, high-speed machines, high-speed electric machinery, printing machinery, food processing machinery, aviation, spaceflight, navigation, petroleum, chemical industry, automobile, electronics, metallurgy, electric power, textile, pumps..
Check Stock

Vktech 4 Pcs SC20UU 20mm Aluminum Linear Motion Ball Bearing Slide Bushing for CNC

  • High Quality: Made of professional aluminum material for rails, it has super wear and corrosion resistance and stable chemical properties for long time use.
  • Feature: Strong rigidity, small friction coefficient, can support smooth sliding.
  • Specification: Model: SCS12LUU, Nominal Shaft Diamter (dr): 12mm.
  • Wide Application: Widely used in printing machinery, electronic equipment,woodworking machinery, door and window machinery, packaging machinery, medical machinery and other equipment.
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month.
  • any questions feel free to contact us, we will be here for you..
Check Stock