Reviews Weaver Scope Rings
Burris 420180 Xtreme 1" Tactical Aluminum Scope Ring Set (Two Rings) for Picatinny-Style Mounts, Six Hole, Low 1/4 in. Height, Matte Black
- SOLID AND DURABLE CONSTRUCTION: The ring set is made of strong yet lightweight aluminum in a black matte finish.
- it was built to withstand any amount of recoil and multiple uses due to its strong performance.
- FITS MOST WEAVER/PICATINNY-STYLE MOUNTS: Built with performance in mind, this set includes 2 pieces of low-profile rings that fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
- suitable for all 1-inch / 25.4mm scope tube.
- VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
- this will hold any other 1" accessories that you might want to mount.
- EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
- the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
- LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively....
Check StockMonstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile
- Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
- Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
- Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
- Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
- All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check StockMonstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile
- Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
- Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
- Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
- Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
- All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check StockBrowning 12550: Base, Ab3, 2-PCE, Weaver, Matte
- Allows easy use of Weaver-style rings that are appropriate to your scope.
Check StockBSA Optics Optix Hunting Rifle Scope Series 3-9 X 40 with BDC-8 Reticle, Black, one Size (HS3-9X40TB)
- one-piece aluminum tube construction, low profile zero-reset turrets, fast focus..
- optix premium hunting series scopes from bsa.
- Included components: Scope, two-piece weaver rings.
Check StockPRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
- Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
- Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
- Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockAtom Optics 1 inch Riflescope Rings Quick Release Picatinny/Weaver Scope Rings with Quick Detach High/Medium Profile(Medium-1.1 inch)
- 1 inch quick release scope rings fit 20mm dovetail mounts,rails and bases.
- scope rings 1 inch fits standard 20mm Weaver / Picatinny rail, aluminium alloy construction with a matte black finish.
- Scope ring with quick detach/lock lever with full adjustability to fit on any picatinny rail.
- High profile scope rings(item height:2.12"/54mm),the height from the center of the riflescope tube to the picatinny base is 1.3inches(33mm).
- Medium profile scope rings(item height:2"/50mm),the height from the center of the riflescope tube to the picatinny base is 1.1inches(28mm).
Check StockMonstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles with Integrated Level Bubble | 0 MOA
- Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
- Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
- Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
- Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check StockAthlon Optics Precision 34mm MSR Ring, Black (701007)
- Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
- The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
- With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check StockBurris Optics Signature Zee Rings, Steel, Pos-Align Inserts, Weaver Style - Mounting Accessories, Burris Rings Mount
- QUALITY SIGNATURE ZEE RINGS – Machined from solid steel, count on reliable accuracy from these mounting rings..
- PRECISE MOUNTING ACCESSORIES – These rings are made to an exact tolerance for ultimate accuracy and precision..
- STRONG BURRIS RINGS – Manufactured so the top and bottom are perfectly matched, these rings are unmatched in strength and fit..
- UNIQUE MOUNTING – Pos-Align Inserts offer tremendous gripping power and durability and will not damage the scope finish..
- WEAVER-STYLE ZEE RINGS - These solid steel rings handle recoil smoothly and work with Weaver-style bases..
Check Stock