Reviews Waterproof Cement Board

Hitachi 18106 10-Inch Polycrystalline Diamond Dry Cutting Hardiblade Saw Blade 6-Teeth

  • More durable than traditional carbide blades.
  • Made for cross cutting fiber cement board.
Check Stock

Tape Fiberglas Cement 3inx50ft

  • Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes..
Check Stock

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
  • 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....
Check Stock

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).
Check Stock

No Damage Hook - The only Hooks for Fiber Cement Board siding That Does not Require Drilling. 4 Hooks with Installation Tool Included.

  • Finally, a way to hang items on your fiber cement board siding without drilling!.
  • Installation video: https://youtu.be/6RutcQ1IBhw.
  • These hooks are made in the USA and are patent pending..
  • Hang items on your fiber cement board siding without drilling or any other damage..
Check Stock

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
  • Make sure to mix the paint and cement dry powder first, then add water and stir!.
Check Stock

Schluter Systems Waterproof Extruded Polystyrene Foam Kerdi Board w/Thermal Insulation KB121220812 18x Building Panel 48 x 32 x ½ for Shower Wall & Tile Substrate Coverage 192 Sq Ft 17.8 Sq M

  • Kerdi polystyrene extruded waterproof wall panels for showers are light and, robust, dimensionally stable, making them easy to create a waterproof shower system. Dimensions: 48" x 32" x ½" (122 cm x 81 cm x 1.25 cm).
  • In addition to excellent waterproofing capabilities, Schluter building foam board KB 12 1220 812 has great foam insulation properties, thus can be used in various applications.
  • Shower wall panels contain no cement or fiberglass for a dust-free installation. The foam boards are covered with fleece webbing (Kerdi Membrane) on each side for effective bonding of tile to the surface.
  • Kerdi insulation board being impact-resistant and rigid, can be used to build custom vanities, shelving units (niche), countertops, and bathtub surrounds, benches and tile can be installed right away.
  • The Schluter Building Panel can be tiled with all types of porcelain, ceramic, or stone tile, whether they are mosaic or large format tiles, due to their stiffness, strength, and even surface.
Check Stock

Uncoupling Membrane 1/8” Underlayment – 108 sq. ft. - Waterproofing Tile or Stone Flooring Bathroom, Shower, Sauna, Steam Room Floor – Water Proof & Crack Isolation – Snap Products

  • ...room, master bath, hallways, or anywhere you want to lay stone or tiles.
  • Brand Name Quality: Snap Products is a California based American home improvement materials company. We hold all of our products to the same high standard as any other American manufacturer. This uncoupling and waterproofing membrane with an integrated bonding fleece roll is made with new, virgin polyethylene synthetic polymer. This high strength material provides strong adhesion and multi-layered waterproof protection..
  • Simple Installation: The underside anchoring fleece allows direct application on various surfaces with any unmodified thin set mortar. Super thick, strong, and durable this 0.125” thick membrane is designed to work with all types of substrate and stone or tile floors. It also provides sound reduction and control, a thermal break, and vapor barrier..
  • Satisfaction Guaranteed: We stand behind all of our products and guarantee your satisfaction. We know you demand a product that can hold up in all situations and exceed your expectations. We are confident you will love our quality and our competitive prices. Give us a chance to be your new name brand choice! This 1/8” large roll is 3.3 ft x 30 ft (1m x 10m) for a total of 108 square....
Check Stock

PacTool SS204 Snapper Shear - Power Cutter for Fiber Cement Siding - Professional Power Tools

  • ELECTRIC TOOLS: Our corded, 110-volt shears are designed to cut 5/16-inch fiber cement siding. Combining our well-known precision-machined cutting....
  • CONTRACTOR TOOL: If you need to work on several homes, these electric shears are for you. Made with reversible and replaceable solid tool steel....
  • CEMENT BOARD: This product was created to shear cement siding rather than cut it, making precise, fast, and consistent cuts. Ideal for use on....
  • SMART SHEARS: Developed to minimize harmful airborne dust while using it, this product allows workers to cut and install in one place. This....
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line....
Check Stock

PacTool SA903 Gecko Gauge - Siding Mounting Kit for Fiber Cement Installation - Compatible with 5/16-Inch Siding

  • PRO GRIP CLAMP: Ideal for one-person installation, this siding mounting block gauges and supports the next course for nailing, with virtually no layout time. Making any job ideal for one-person installation, with more accuracy, and 50% percent faster..
  • SIDING TOOLS: Our gauges can be adjusted at 1/4-inch increments for 4 to 8-inch siding reveals, and the patented Friction-Cam mechanism can support full 12-foot cement-board siding lengths. This feature ensures equal spacing between each board..
  • PROFESSIONAL EQUIPMENT: This product is safe to use on primed or pre-finished siding products. Made from durable plastic, the locking grip is made from a rubber material, ensuring that the front face of your siding will not be scratched or damaged..
  • LIFTING TOOLS: Works with 5/16-inch James Hardie’s including the updated HZ5 series with a new “eased” drip-edge profile. Designed to hold the board at the correct height, these hands-free clips help install fiber cement siding with less fatigue and more productivity..
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..
Check Stock