Reviews Water Soluble Alkyd Resin

INSL-X PS800009A-01 Prime Lock Plus Alkyd Primer, 1 Gallon, White

Fast-drying, multi-purpose Alkyd-based coating that primes and seals a variety of substrates and hard to block stains with excellent adhesion.
High hiding Alkyd primer that seals stains from water, smoke damage, and more.
300 - 350 square foot coverage per gallon.
Apply when temperature is above 45 °F (7.2 °C).
Do not paint if surface temperature is within 5 degrees of the dew point.

Use on peeling or worn interior or exterior surfaces including wood, metal, concrete and more.
Triple-thick formula penetrates and bonds with cracked or peeling surfaces to glue down edges and fill in gaps for a smooth finish.
Dries to the touch in 30 minutes, can be recoated in 2 hours and covers between 12-50 sq. ft. per quart depending on surface porosity.
Creates a smooth, flexible, sealed finish.

Great foundation for latex, acrylic or oil/alkyd exterior house paints, apply primer to surface you intend to paint prior to finish coating.
Provides the important first-step for a long lasting paint system that is blister and peel resistant.
Superior Coverage up to 500 Sq Ft per Gallon plus Dries bug-free in 30 minutes.
Excellent primer for exterior wood, masonry, brick and clean metal.
Weather-Resistant Latex Primer Paint for all Latex, Acrylic and Alkyd House Paints.
For best results prepare surface properly and time work so that you can stop painting at least 4-hours before nightfall. Not for use on roofs or floors.

Honey clay is a material that can improve your creativity and imagination..
Honey Clay made of non-toxic water-soluble resin filler.
Moisturizing ingredients derived from honey have been added to the existing product Light Clay.
Bulk packages that can be freely used. Package design may change to improve product quality.
Includes: Donerland Honey clay 500g (1.1lbs).

Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
Protects against mold hang ups with polyester and vinyl-ester resins.
also used with epoxy and urethane resins.
PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..

Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
Protects against hang ups with polyester and vinyl-ester resins.
also used with epoxy and urethane resins.
PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..

Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
Protects against surface hang ups with polyester and vinyl-ester resins.
also used with epoxy and urethane resins.
PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..

Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
Protects against hang ups with polyester and vinyl-ester resins.
also used with epoxy and urethane resins.
PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).

Winsor & newton blending and glazing medium reduces the consistency and slows the drying rate of oil and alkyd colors.
Developed for painting techniques and can be used like a 1-2-4 medium for blending, glazing, stroke work, antiquing and staining.
Combustible, keep away from heat and flame.