Reviews Water Solenoid Valve

Fankerba Normally Open Pressure Solenoid Water Valve for Water Air - DC 12V 1/2 / Pure Copper Coils

  • This is pressure solenoid valve:it is suitable for tap water supply..
  • This is normally open solenoid valve:water will be supplied without electricity, and the solenoid valve will not work after power is turned on..
  • It is 67.7mm/2.67 inch length between the two joints.
  • it is 69mm/2.7 inch height between the up and down..
  • The valve body is plastic and the joint is copper.
Check Stock

Wyin 4L Aquarium Co2 Generator System with Single Gauge Display Pressure Gauge, DIY Co2 Generator System Kit, Automatic Pressure…

  • ...remove the air tube, convenient for your use.
  • 【Safety Protection】 The Wyin co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve makes you away from the danger of solenoid valve leakage and protects your safety. The u-shaped pipe connecting the air pipe is equipped with a one-way valve to prevent water backflow.
  • 【Fine the Bubbles】 Wyin CO2 generator system is equipped with an atomizer to refine the bubbles so that they can be easily dissolved in water and absorbed by plants, keeping your aquarium full of life. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • 【What's in The Box?】 The box you receive will come with a cylinder, stainless steel pressure-reducing valve, filter, bubble counter, solenoid valve, solenoid valve power supply, solenoid valve connection cable, spare sealing ring, spare atomizer piece, 4 snap-on suction cups, one-way valve, stainless steel U-tube, 2 stain....
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

WR57X10032 WR57X33326 Refrigerator Water Inlet Valve WR57X10032 Dual Solenoid Valve Compatible with Ge Refrigerator Replace WR57X33326 WR57X10040 WR57X10064

  • ★★WR57X10032 WATER INLET VALUE:WR57X10032 double solenoid water valve, one solenoid valve allows water to flow into the ice maker, and the other....
  • ★★DIRECT REPLACEMENT:WR57X10032 water inlet valve directly replaces refrigerator water valve WR57X33326, WR57X10032, AP6995571, WR57X10040,....
  • ★★COMPATIBLE MODELS:WR57X10032 compatible with most brands such as G-E:....
  • ★★INSTALL AND REPAIR:WR57X10032 water inlet valve can solve the following problems: the solenoid is faulty.
Check Stock

ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output

  • ...remove the air tube, convenient for your use.
  • 【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make you away from the danger of solenoid valve leakage, protect your safety.
  • 【Refine The Bubbles】Our CO2 aquarium kit is equipped with an atomizer, which can purify bubbles, make them easily soluble in water and absorbed by plants, and make your aquarium full of vitality. We also gave you an extra atomizer as a replacement to extend the service life of the product. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • 【What's in The Box?】 The box you receive will come with a cylinder, stainless steel pressure-reducing valve, filter, bubble counter, solenoid valve, solenoid valve power supply, solenoid valve connection cable, spare sealing ring, spare atomizer piece, 4 snap-on suction cups, one-way valve, stainless steel U-tube, 2 stainless steel atomiz....
Check Stock

Wyin CO2 Regulator Aquarium 12V DC CO2 Solenoid Pressure Adjustable with Big Dual Gauge Display, Bubble Meter can be Connected, Check Valve, Aquarium Co2 Kit Fits Two Standard US Tanks

  • 【Peace of Mind After Sale】 In order to improve your sense of the use of our product, we provide an additional set of accessories (copper tube+spring iron) for the solenoid valve of this product. If your solenoid valve reaches the service life, you can replace it yourself to extend the service life of the product. If you have any questions, please feel free to contact us!.
  • 【Can be Used for Multiple Aquariums】The CO2 regulator aquarium kits is equipped with multiple bubble meters that can be connected to multiple aquariums at the same time. It is simple and convenient to operate. The module of the bubble counter can be purchased in this shop.
  • 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Waterproof Solenoid Valve 】 Our co2 solenoid valve adopts the new integrated injection molding technology, which is waterproof and do....
Check Stock

Beduan 2 Way Normally Closed DC 12V Electric Solenoid Air Valve 1/8\ NPT

  • 【Service Media/Material】 Air, Gas, Liquid, Water./ Anodized Aluminum.
  • 【Port Coil Voltage】 12V Port size: 1/8" Female inlet/outlet port..
  • 【Temperature/ Pressure Range】 23-176°F, Pressure Range:115 PSI..
  • 【Selenoid Valve Type】 2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
  • 【Feature】This solenoid water valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
Check Stock

uxcell Pulse Solenoid Valve G1/2 DC3.6V Copper Male Thread Valves with Filter

  • This solenoid valve is basic automated components that electromagnetically control fluids..
  • Flow Direction: Unidirectional (Follow the Arrow on Valve Body).
  • Solenoid type magnetic field makes the valve reach higher pressure, which greatly improves the flow of the passed medium..
  • Replacement solenoid valve for induction fittings. Replace the bad work solenoid valve for machine..
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

  • PROFESSIONAL! Professional CO2 generator system with SUS304 stainless steel bottle, regulator, bubble counter, safety valve. Far better than simple plastic bottle generators: more reliable, steady, durable, efficient..
  • SAFE! The bottle body adopts 1.5mm thickness SUS304 stainless steel(more 25% thickness than normal 1.2mm), blasting pressure up to >80kg/cm2(1137PSI), Safety valve will open automatically when it exceeds the safe pressure..
  • NEEDLE VALVE WITH BUBBLE COUNTER! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds..
  • OPTIONAL MINI DC 12V SOLENOID! You can choose a 12V DC solenoid valve with the generator, will automatic turning on/off CO2 output with timer..
  • ATTENTIONS: Solenoid NOT included, need order seperately..
Check Stock

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock