Reviews Water Pump Bolts

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

Permatex 24200 Medium Strength Threadlocker Blue, 6 ml

  • Locks and seals while preventing parts loosening due to vibration.
  • Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm).
  • Removable with hand tools for easy disassembly.
  • Suggested Applications: valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock

BMotorParts Fuel Pump Valve for 190cc Excell XC2800 2800PSI 2.6GPM Pressure Waher

  • 3000 PSI Pressure Washer Water Pump For Excell DDeVilbisss XC2800 XR2750 XR2750-01.
  • -1- GGenuinee OEM BBrasss HHEADD HHimoree Pressure Washer Pump for units from 2800-3000 PSI.-Fits Excell DDeVilbisss XC2800 XR2750....
  • Spacing Between Mounting Bolts is 2 9/16"- Center to Center.
  • Mounting bolts & Key WWayy are not included..
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

Ice-O-Matic KPU090 Pump Kit for Ice Maker GEMU090

  • PUMP KIT FOR GEMU090: The Ice-O-Matic Pump Kit designed for the GEMU090 Nugget Pearl Ice Machine, Pump kit installed inside the ice maker cabinet for built in applications..
  • IDEAL FOR ICE MACHINES WHERe FLOOR DRAIN IS NOT AVAILABLE: This ice bin sump pump is perfect for installation in office break rooms, doctors offices or residential homes, that might not have access to a floor drain..
  • PREVENTS FLOODING: This pump kit helps remove the water that condenses after ice melts inside the machine, preventing the ice maker from being flooded and making it easier to clean..
  • DRAINAGE: This part forces drain water to a maximum of 10 feet and includes the pump, wiring harness, and tubing. The check valve is designed to prevent repumping of drain water into the drain hose..
  • KIT INCLUDES: Pump and motor with check valve, Switch mounting bracket assembled to switch assembly, Wire harness, Pressure hose (clear), Drain hose (white preformed), Stainless Steel shield and Misc Hardware (Snap Bushing, Hose Clamps, Mounting Bolts and Screws).
Check Stock

Permatex 80038 Prussian Blue Fitting Compound 0.75 fl oz Tube Package may vary

  • All-purpose, medium strength threadlocker will lock and seal while preventing parts from loosening due to vibration.
  • Gel Squeeze Applicator provides accurate dispensing, putting the threadlocker where you want it.
  • Gel formula provides 'liquid-reliability' without drips, globs, mess or waste, allowing for easy overhead and vertical applications.
  • Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm).
  • Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock

Flex-a-lite 14524 Mill Finish 1/2\ Fan Spacer Kit

  • This fan spacer extends the fan 2.5 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords. Fords.
Check Stock

Loctite 248 Blue Threadlocker Glue Stick: All-Purpose, Medium-Strength, Anaerobic | Blue, 9-Gram Wax Stick (PN: 37643-506166)

  • This medium strength anaerobic threadlocker offers the same locking strength and sealing capabilities as our traditional blue threadlocking liquid.
  • Wax-like stick is conveniently packaged in a seld-feeding stick applicator.
  • Well-suited for difficult repairs, as in overhead applications.
  • Great for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs.
Check Stock

Permatex 24010-6PK Medium Strength Threadlocker Blue Gel, 10 g Gel Twist Applicator (Pack of 6)

  • All-purpose, medium strength threadlocker will lock and seal while preventing parts from loosening due to vibration.
  • Gel Twist Applicator provides accurate dispensing, putting the threadlocker where you want it.
  • Gel formula provides ‘liquid-reliability’ without drips, globs, mess or waste, allowing for easy overhead and vertical applications.
  • Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm).
  • Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock