Reviews Water Pressure Diaphragm Tank

Scubapro MK11/C370 Dive Regulator System, INT, Black

Air-balanced diaphragm first stage design delivers constant and effortless airflow unaffected by depth, tank pressure, or breathing rate..
Marine grade brass body has sealed internal parts to prevent water and pollutants from fouling the inner mechanism while enhancing cold-water performance..
Two high pressure, two low pressure and two high-flow LP ports maximize hose routing options..
External Intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily..

Features a Solid Carbon Steel Construction with an Exclusive Polypropylene Liner, MIG Welding, SBR Rubber Diaphragm, and External Baked Epoxy-Polyester Coating for Superior Performance.
Each Tank is Factory Leak Tested and NSF61 Certified.
Low Profile Tank Design with Full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle.

Diameter: 9” inches (230 mm) NSF approved, food grade, post-cured diaphragm Virgin polypropylene liner Pre-pressurized pressure.
Connector: ¼” NPT Stainless Steel Height: 14 inches (353 mm) Diameter: 9” inches (230 mm) NSF approved, food grade, post-cured diaphragm Virgin polypropylene liner Pre-pressurized pressure Max. working pressure: 100 psi.
Stainless Steel Height: 14 inches (353 mm).

Outlets: 1/2"-14 external thread interface.
【Anti-vibration/noise reduction】Water pressure pump equipped with anti-vibration iron plate mounting bracket and rubber feet, which can reduce the working noise more greatly. The surface of the iron plate adopts galvanized anti-rust treatment, which is durable..
【100% pure copper motor】The water pump has overload and overheat protection function, the noise is smaller and the speed is higher, and the operation is safer and more reliable.When the motor generates too much heat, the circuit can be automatically disconnected to protect the motor..
【Auto close/open】This power water pump has a built-in adjustable pressure switch that turns on/off at 55 PSI. Our industrial water pressure pump are self-priming , allow for usage even if located above water tank. Electric water pump automatically opens when turn on the water tap, stops when turn off the water tap..

An air-balanced diaphragm first-stage design delivers constant and effortless airflow unaffected by depth, tank pressure, or breathing rate..
Sealed internal parts within the brass body keep water and pollutants from fouling the mechanism while improving the regulator’s performance in cold water..
Built in a rugged technopolymer case, the full-featured S560 second stage helps reduce jaw fatigue and improve comfort throughout your dive..
The regulator includes two high-pressure ports, two standard low-pressure ports, and two high-flow low-pressure ports to maximize your hose routing options..
Driven to constantly innovate and improve the diving experience, SCUBAPRO builds high-quality equipment for the work, sport, and lifestyle of people whose passion is found below the surface..

Scubapro’s compact regulator is completely sealed off from the elements to keep out water and pollutants, making it ideal for less-than-pristine waters..
With an air-balanced diaphragm first-stage and a chrome-plated brass body, The regulator delivers a constant and effortless airflow unaffected by depth, tank pressure, or breathing rate..
Two high-pressure and four high-flow low-pressure.
The regulator is designed to resist freezing in extreme conditions thanks to a dry ambient pressure chamber and a metal inlet tube, orifice, inhalation control knob, and hose Connector..
Driven to constantly innovate and improve the diving experience, Scuba builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface..

Designed to meet the requirements of, and are listed by the National Sanitation Foundation (NSF) under ANSI/NSF Std 62.
The Butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks.
The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water.
Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness.
A high gloss enamel finish protects tank from the elements.
Pre-charged to 25psi: please refer to product manual for proper pre-charge setting.

RELIABLE PROTECTION: Eastman thermal expansion tanks are designed with quality to prevent hot water from backflowing into the cold water line, they....
DESIGN: This 2-gallon thermal expansion tank has a dimension of 12. 4-inches x 8. 3-inches and it's indicated for use in water heaters and boilers....
FACTORY PRECHARGED: The expansion tank is factory precharged at 40 psi, this setting can be adjusted during installation to match the water pressure....
DURABILITY: Manufactured with high-quality butyl rubber diaphragm and 304-stainless steel fittings for a long performance.
QUALITY: Eastman backs the unparalleled operation of this product with years of experience in manufacturing plumbing products.

Smaller and lighter than the S600 but using the same-sized diaphragm, The S620 Ti delivers instant air on demand with Super inhalation sensitivity..
An air-balanced flow-through piston housed in a chrome-plated brass body provides constant airflow unaffected by depth, tank pressure, or breathing rate..
Scubaproâ€s patented extended thermal insulating system insulates the inner mechanism, improving cold-water resistance without compromising breathing performance..
The regulator includes two opposing high-pressure ports that let you position the first stage up or down, along with four high-flow and one axial super-high-flow low-pressure ports..
Driven to constantly innovate and improve the diving experience, Scuba builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface..

Fine Fog Particles:The nozzle is using universal type, ensure wide range of spraying, fine fog particles and 3D adjustable without leaving any dead corner..
High Pressure:High pressure and high flow rate, specially designed for the rain forest tank, create natural ecological forest..
High Efficiency:Adopting of diaphragm silent pump, low noise, low power consumption, stable performance and long lifespan..
Widely Used:Friendly provide a homelike and comfortable humid environment. Applicable for rain forest tank and reptile breeding, plants breeding, site cooling and atomization landscape..
High Quality:It is made of high quality metal material, strong and durable..