Reviews Water Cooled Machine

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • ...n install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable for road cutting machine, grinder, water pump, microtiller, air conditioner compressor, microtiller, etc. Packing list:Screw driver + 14-17mm wrench + connecting plate set screw + fixed key + screw gasket + and a 10-12mm wrench+Diesel engine..
Check Stock

BestEquip Cooling System CW5200DG Industrial Water Chiller CW-5200 White

  • Product Parameter: The CW-5200DG industrial water cooler chiller is 8.5L capacity, Using standard R470C refrigerant,10L/max.flow, Precision:....
  • Efficient Cooling Fan: The water cooler chiller has two professional forced air-cooled radiators, high heat dissipating capacity, and not easy to be....
  • Constant & Intelligent Temperature Mode: CW-5200 series industrial chiller can be used to cool high-power lasers. Two working temperature modes are....
  • Various Alarm Functions: This professional industrial chiller has multiple warning protection mechanisms such as water flow alarm protection, high/low....
  • Multiple Application: CW-5200 Series professional industrial water cooler machine is suitable for small water-cooled cooling devices requested....
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

22" Commercial Ice Maker Machine 550LBS/24H with 350LBS Large Storage Bin, 990W SECOP Compressor, Air Cooled, Automatic Cleaning, Perfect for Restaurants, Bars, Cafes and Other Businesses (Full Ice)

  • ...ce every day? This commercial ice maker can be a good solution to your worries. Up to 550 lbs of ice per day, it can supply all the ice you need for your restaurant, cafe, bar, catering company, or hotel. Serving above 370 meals per day according to 1.5 lbs ice per meal sold in restaurant. In just 8~15 minutes, the machine can produce 182 ice cubes for immediate use, which is perfect for busy establishments..
  • ♪【SECOP Compressor & Air Cooled】As the heart of the ice machine, our machine uses the world's top brand SECOP Compressor.These compressors are known for their high efficiency, durability, low noise, reliability and variable speed operation.Ice machine is air-cooled, compared with water-cooled, has the advantages of low noise, low energy consumption, low water consumption, easy maintenance, etc.You get what you pay for..
  • ♪【High-Quality Materials Create High Performance】Built with heavy-duty, high-quality brushed stainless steel, which is rust-proof and durable while being aesthetically pleasing. Ice storage bin is composed of food grade PP injection liner and six-sided cyclopentane foam layer, not only can easily withstand impact from ice, b....
Check Stock

PENNZOIL Marine TC-W3 2 Cycle Engine Motor Oil 1 qt.

  • For outboard, water cooled & air cooled 2-cycle engines.
  • Including those calling for 100:1 fuel to oil ratio, & all air cooled 2-cycle engines requiring an NMMA TC-W, TC-W11 or TC-W3.
  • Exceeds requirement of water cooled outboards and air cooled engines at heavy loads and high speeds for long periods.
Check Stock

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • ... This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to....
Check Stock

WeldingCity 5-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32\x36\ | Pack of 5-Lb

  • Packing including: The 53pcs tig welding torch stubby gas lens kit accessories including---4pcs TIG Stubby Gas Lens + 4pcs TIG Gas Lens Collets Body + 12pcs TIG Collets+6pcs #10 Pyrex Glass Cup + 10pcs TIG Alumina Nozzle+3pcs TIG back cup+ 2pcs Gasket Cup+12pcs Temperature Resistant O-rings.
  • Fit for: 17 & 26 series air cooled torches + 18 series water cooled torches, Lincoln torch model #---PTA-17/PTA-18/PTA-26 , Miller Diamondback torch model#--DB17/DB18/DB26 AND the Weld craft WP-17/ WP-18 /WP-26.
  • Electric conductivity similar with: 2% thoriated tungsten electrode.
  • Applicable machine: Mitech, Longetivity,Rilon, Krypton, Riland, Jasic, Chiry, UNT, Berlan etc.
Check Stock

Professor Mysterious Ground Hugger Indoor Fog Machine Fluid, Quart

  • To generate amazing low-lying fog effects, a fog cooler or cooled fog machine is required.
  • Generates a medium density, low-lying fog that dissipates before it gets too high.
  • Made from pure RO/DI water and pharmaceutical-grade FDA GRAS materials.
  • Non-toxic, non-flammable, non-staining, and unscented.
  • 1 quart water based fog liquid, compatible with all water-based fog machines 400w and higher.
Check Stock