Reviews Water Bucket Mould

LAO XUE Ice Cube Tray,Ice Bucket Maker,Large Silicone Ice Cube Trays with lid,Silicon Ice Cube Trays,(2 in 1) Space Saving Ice Cube Mold, Portable Round Ice Cube Mold

  • ...bes, is large enough to share with family and friends..
  • 【Multiple use】It is suitable for all kinds of parties, such as dinner and birthday parties, picnics and so on!Provides longer cooling time for bottled beverages such as bacardi,vodka,champagne,whiskey,cocktails,wine and cola..
  • 【Usage】First,fill the inner bucket and press the inner bucket hard.The inner bucket edge is based on lower than the outer bucket edge.Second,add water along the edge,close the lid when the water is filled.Third,put the ice bucket horizontally in the refrigerator,freeze for more than 4 hours,then take out.Note: please be sure to press hard to avoid the bottom of the bucket frozen, the inner bucket floating and you can refer to our video tutorial too..
  • 【High quality materials】Our large organ silicon 2 in 1 ice bucket and ice making mould are made of high quality food grade silicone, TRP and PP, which can be used directly to eat frozen ice..
Check Stock

Ice Bucket,Large Silicone Ice Bucket & Ice Mold with lid, Silicon Ice Cube Maker LEADTEAM, (2 in 1) Space Saving Ice Cube Maker, Portable Silicon Ice Cube Maker

  • 【Usage】First,fill the inner bucket and press the inner bucket hard.The inner bucket edge is based on lower than the outer bucket edge.Second,add water along the edge,close the lid when the water is filled.Third,put the ice bucket horizontally in the refrigerator,freeze for more than 4 hours,then take out.Note: please be sure to press hard to avoid the bottom of the bucket frozen, the inner bucket floating and you can refer to our video tutorial too..
  • 【High quality materials】our large organosilicon 2 in 1 ice bucket and ice making mould are made of high quality food grade silicone, TRP and PP, which can be used directly to eat frozen ice..
  • 【Multiple use】it is suitable for all kinds of parties, such as dinner and birthday parties, picnics and so on!Provides longer cooling time for bottled beverages such as bacardi, vodka, champagne, whiskey, cocktails, wine and cola.
  • Portable】the space-saving size is ideal for both outdoor and indoor use.You can go on a camping trip or have a picnic and enjoy a cold drink.It can add a lot of fun to your camp trip or outing..
  • 【Unique two-compartment design】 an outer compartment for frozen ice, while an inner compartment for hold ice, with a large capacity of 120 ice cubes, is large enough to share with....
Check Stock

XINYIYUAN Large 2 in 1 Silicone Ice Bucket & Ice Mold with lid,Silicon Ice Cube Maker Genie, Portable Silicon Ice Cube Maker Blue 13.2X13.2X14CM

  • [Multiple use]It is suitable for all kinds of parties, such as dinner and birthday parties, picnics and so on!Provides longer cooling time for bottled beverages such as bacardi, vodka, champagne, whiskey, cocktails, wine and cola..
  • [High quality materials]Our large organosilicon 2 in 1 ice bucket and ice making mould are made of high quality food grade silicone, TRP and PP, which can be used directly to eat frozen ice..
  • [Portable]The space-saving size is ideal for both outdoor and indoor use.You can go on a camping trip or have a picnic and enjoy a cold drink.It can add a lot of fun to your camp trip or outing..
  • [Unique two-compartment design]An outer compartment for frozen ice, while an inner compartment for hold ice, with a large capacity of 120 ice cubes, is large enough to share with family and friends..
  • [Usage]First,fill the inner bucket and press the inner bucket hard.The inner bucket edge is based on lower than the outer bucket edge.Second,add water along the edge,close the lid when the water is filled.Third,put the ice bucket horizontally in the refrigerator,freeze for more than 4 hours,then take out.Note: Be sure to press hard to prevent the bottom of the ice bucket from freezing and the internal bucket from floating..
Check Stock

ALLADINBOX Ice Cube Mold Ice Trays Large Silicone Ice Bucket 2 in 1 Ice Cube Maker Round,Portable Dark blue

  • 【Usage】1. Add water slowly along the gap of the cup wall and the water level should be lower than the edge of the outer barrel. 2. Press the inner....
  • 【High quality materials】our large organ silicon 2 in 1 ice bucket and ice making mould are made of high quality food grade silicone, which can be....
  • 【Multiple use】Ideal for iced coffee, flavored ice and more in summer.The ice cube tray will provide you a pleasant mood to make ice. You will....
  • 【Portable】the space-saving size is ideal for both outdoor and indoor use.You can go on a camping trip or have a picnic.It can add a lot of fun to....
  • 【Note】please just feel free to contact us if you have any problem, we will try our best to help you..
Check Stock

Ice Roller for Face, Black Facial Ice Roller Mould, Silicone Face Ice Cubes for Skin Care and Pain Relief, Reusable DIY Facial Care Ice Mould

  • 【Easy to Make Ice & Demould】After frozen for no less than 12 hours in the environment below -10℃, submerge one end of the lid of the frozen ice mould under running water for 30 seconds, and then easily remove the lid horizontally..
  • 【Anti-Spill Design】We added a high quality silicone sealing ring to the seam in the middle of the ice mould, which can enhance the sealing performance of the ice mould and prevent the water in the mould from overflowing..
  • 【Good for Skin Care】The face roller with ice on the face can Improve puffiness, Moisturizing before makeup, Soothes and repairs after sun exposure, Shrink pores and tighten skin and Improve fine lines. Different DIY beauty materials can be matched according to your needs. (Such as Cherry Tomatoes, Milk, Rose, Cucumber, Lemon ect).
  • 【Also Good for Pain Relief】This ice mould is a very practical must-have gadget at home. In addition to good for facial rejuvenation, you can Use this ice mould to ice compresses for relieving physical discomfort. (Such as Toothache, Headache, Fever and Sprain ect).
  • 【Practical Gift】This ice mould is approx. 2.2 x 1.6 x 3.9 inch which is very comfortable to hold, small and light design, and easy to grasp, also the ice roller hea....
Check Stock

4 Pack Tray Silicone Molds

  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 10.5 cm/ 1.57 x 2.76 x 4.13 inches.
  • Multiple applications: these epoxy casting craft moulds can be applied to create many projects from home decorations to jewelry designs, such as cup mats, coasters, agate coasters, bowl cushions, telephone holder trays, candle holders, handicra....
Check Stock

4 Pieces Mushroom Shaped Silicone Mould Mushroom Cake Moulds Vegetable Fondant Candy Moulds for Chocolate Candy Ice Cube French Dessert Cake Decoration

  • Package includes: you will get 4 pieces funny shape silicone moulds in 3 different shapes.
  • The size of each mould is different, please refer to the picture for the specific size carefully before purchasing.
  • Reliable material: made of quality silicone material, these mushroom chocolate mould trays are durable, non-toxic, odorless, heat resistant and reusable, so you can rest assured to use them to make various kinds of food.
  • Mould trays are able to be applied in oven, microwave, dishwasher and fridge.
  • Smooth and non-stick: the surface of silicone mould is smooth, non-stick and flexible.
  • And the mushroom-shaped dessert will pop up by pressing the mould with your fingers, easy to demould and also convenient to clean with water.
  • Wide range of usages: these silicone moulds are suitable for baking mousse, cake, French dessert, chocolate, ice cube, candy, cheese cakes, fondant, chocolate, candy, cake decoration, soap, candle, wax and more.
  • Cute shape design: silicone chocolate mould is well designed as many mushroom shapes, cute and lifelike.
  • With this vivid 3D mould, your baking will be more fun and memorable, and desserts made with it will be loved by your friend and family.
Check Stock

Aluminum 3D Beauty Princess Girl Shape Cake Decorating Mould Baking Pan DIY Birthday Cake Mould Kitchen Supplies

  • ...re A Even Baking Process.Uniform Heating, Surface Anode Oxidation Resistant Treatment.Hand Wash Only. Choose Soft Tools and Mild Detergent When You Clean It to Protect Non-stick Coating..
  • NOTE:Before Using the Newly Purchased Cake Mould for the First Time, Soak It in Clean Water, Dry It with Water, Then Put A Little Grease On The Inner Wall of The Mould, and Bake It In The Oven Slowly (About 150 ℃) for About 5 ~ 10 Minutes, Which Can Ensure The Durability of The Product..
Check Stock

Aluminum 3D NO.1 Number 1 Shape Cake Decorating Mould Baking Pan DIY Birthday Cake Mould Kitchen Supplies

  • ...atures High Heat Transfer Efficiency to Ensure A Even Baking Process.Uniform Heating, Surface Anode Oxidation Resistant Treatment.Hand Wash Only. Choose Soft Tools and Mild Detergent When You Clean It to Protect Non-stick Coating..
  • NOTE:Before Using the Newly Purchased Cake Mould for the First Time, Soak It in Clean Water, Dry It with Water, Then Put A Little Grease On The Inner Wall of The Mould, and Bake It In The Oven Slowly (About 150 ℃) for About 5 ~ 10 Minutes, Which Can Ensure The Durability of The Product..
Check Stock

Cake Decorator Preferred Dinosaur Shaped Birthday Party Cake Pan, 3D Aluminum Cake Decorating Mould Baking Pan Kitchen Supplies

  • ...atures High Heat Transfer Efficiency to Ensure A Even Baking Process.Uniform Heating, Surface Anode Oxidation Resistant Treatment.Hand Wash Only. Choose Soft Tools and Mild Detergent When You Clean It to Protect Non-stick Coating..
  • NOTE:Before Using the Newly Purchased Cake Mould for the First Time, Soak It in Clean Water, Dry It with Water, Then Put A Little Grease On The Inner Wall of The Mould, and Bake It In The Oven Slowly (About 150 ℃) for About 5 ~ 10 Minutes, Which Can Ensure The Durability of The Product..
Check Stock