Reviews Wall Air Duct Grille

Accord ABRGWH126 Return Grille with 1/2-Inch Fin Louvered 12-Inch x 6-Inch Duct Opening Measurements White

  • Measure the duct opening to determine the correct size, not the outside of the grille.
  • Listed product size refers to the duct opening measurements.
  • Steel construction with 1/2-in spaced fins.
  • 12-in x 6-in is the size of the duct opening dimensions, the grille itself measures 13.7-in x 7.7-in.
Check Stock

Accord ABRGWH146 Return Grille with 1/2-Inch Fin Louvered 14-Inch x 6-Inch Duct Opening Measurements White

  • Measure the duct opening to determine the correct size, not the outside of the grille.
  • Listed product size refers to the duct opening measurements.
  • Steel construction with 1/2-in spaced fins.
  • 14-in x 6-in is the size of the duct opening dimensions, the grille itself measures 15.7-in x 7.7-in.
Check Stock

Hohean 2 Pieces Stainless Steel Air Outlet Vents 6 Inch Round Louver Grille Cover Wall Air Soffit Vents Flat Ducting Air Ventilation Outlet Hood with Screen Mesh for Wall Ceiling (4 Inch)

  • ...t cover with louver, waterproof and anti-rust, and the louver is inclined 45 degree.
  • Air outlet vents built in screen mesh can stop uninvited guests from entering the house.
  • Note: please note that the edge is peaked, handle the product with care.
  • Easy to install: by adjusting the regulating valve of the round louver grille cover, it can be installed on the ceiling or wall easily to meet your needs.
  • Installed the louver grille cover on external wall to maintain indoor air circulation, and installed in the air outlet of the corridor to save space.
  • Reliable material: made of quality stainless steel material, this wall air soffit vent is sturdy, anti-rust and has a long service life.
  • Featuring fine craftsmanship and simple style, it is suitable for different home decorations.
  • Widely use: ventilation duct cover can be applied for indoor exhaust and diminish noise, it is very suitable for bathroom vents, exhaust fans, air conditioner units, kitchen fans, gas vents and most other wall vents.
  • Size information: this round air ventilation outlet is about 19 x 14.5 x 5 cm/ 7.5 x 6 x 2 inch, which is suitable for most round hoses with a diameter of 6 inches, also easy to install and remove.
Check Stock

calimaero KWG 6 inch Round Stainless Steel Ventilation Grill Hood with Rubber Seal

  • The bull nose wall vent is ideal for application in outdoor areas. The shape of the hood as well as the fixed downwards protruding slats prevent....
  • BEFORE BUYING, please note, this is to be installed in metal ducts, not in pvc or other plastic pipes. Please measure the diameter of your duct before....
  • INSTALLATION: 1. Install the rubber seal on the outer edge of the hood, sometimes patience is required Insert the lip..
  • INSTALLATION: 2. Insert the weather protection grille with the nozzle into the ventilation pipe and fasten it to the wall with the enclosed screws.....
  • Ideal for all tumble dryer vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat....
Check Stock

Powerful Industrial Exhaust and Ventilation Fan (14 Inch)

  • HIGH-CAPACITY FAN: Ventilation fan operates on a single, impact-resistant centrifugal blower wheel with 109 CFM, 0.9 Sones, and 120V for a powerful and effective performance.
  • HEAVY-DUTY: Housing is constructed of 20-gauge galvanized steel and features a 6" round metal duct connector to provide long-lasting use.
  • CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
  • EFFECTIVE: Motors are permanently lubricated to provide continuous and quiet operation.
  • VERSATILE: Install fan in ceiling or wall -wherever it's needed most!.
  • 109 CFM 0.9 Sones (AMCA), 120V, 1.1 amps.
  • White Polymer Grille with 6-Inch round duct connector.
  • Low profile, white polymer or painted white enamel steel grille.
  • Single, impact-resistant centrifugal blower wheel.
  • 20 gauge galvanized steel housing and can be ducted horizontally or vertically - in-line ducting available with separate adapter.
Check Stock

Air Vent Filters Kit, 120

  • ...eered as air vent filters for home, floor vent filters, ac vent filters, return vent filter , as a ceiling vent filter, air duct filter, heating vent filter, hvac air vent filter and more..
  • Quick and Easy Installation: Simply Cut to Size the hvac filter media roll . Compatible with all size air vents, registers, and grille wall filter vents, as air conditioner vent filters, a 4x12 floor register filter, bathroom vent filter, a floor vent filter, or as heat vent filters..
  • The Biggest Air Filter Media Roll (1200 Inches)! The Best Value for your money! This Air Filter Roll Kit comes with a 10 x 120" of washable air filter material roll and forty 1/2" hook tabs with super sticky adhesive backing. Cut to fit and make a home vent filter, house air vent filter, small vent filter, or other hvac air vent filters..
  • Please remember to wash and dry the outside of your vent first before applying the tabs so the best adhesion can take place..
Check Stock

4 Inch Through-Wall Ventilation kit - Adjustable - Louvered Dryer Vent Hood with Pipe and Duct Connector - White - Plastic - with Built in Fly Screen Mesh (Style 1 with 4'' Inch)

  • ...st Proof】 Louvers of the air vent are especially designed to prevent water from entering your home, and with a stainless steel louver protect you from annoying rodents like mice, rats, birds, and squirrels..
  • ☛【Easy Installation】 Inserting the tube into the air vent grille cover, then you only need to mount it on the wall with screws or silicon seal..
  • ☛【Multiple Usages】The exterior wall ventilation cover is ideal for vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat transfer and ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses..
Check Stock

Dryer Vent Cover Metal Dryer Vent Cap Exterior Wall Vent Hood Stainless Steel Air Vent Grille Cover Wall Duct Ventilation Grill Fan Outlet Airflow Vent Replacement Hood with Weather Proof Louvre

  • ☛【Durable Stainless Steel Material】The exterior wall Durable Stainless Steel Material. The exterior wall vent hood is made of 304 stainless steel material, durable, anti-rust and corrosion resistant..
  • ☛【Automatically Open and Close thru Blow】The air vent duct grill can easily open the flaps when any pressure is applied from the inside. While it will shut the louvers when the dryer stop pushing hot air thru the vents. It helps to keep the draft from coming thru the vents during the cold days ..
  • ☛【Weather and Pest Proof】 Louvers of the air vent are especially designed to prevent water from entering your home, and with a stainless steel louver protect you from annoying rodents like mice, rats, birds, and squirrels..
  • ☛【Easy Installation】 Inserting the tube into the air vent grille cover, then you only need to mount it on the wall with screws or silicon seal..
  • ☛【Multiple Usages】The exterior wall ventilation cover is ideal for vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat transfer and ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses..
Check Stock

Shoemaker Manufacturing, Bronze, 4x10, Premium Floor Register, All Steel Heavy Duty Vent Cover

  • DURABLE: Rolled edge and stabilizing center rib offer extensive durability for years to come.
  • NO TOOLS REQUIRED: Our 4 x 10-inch Bronze-colored floor register fits right into your duct opening, no tools required.
  • QUIET OPERATION & EFFICIENT AIR DISTRIBUTION: Our 4 x 10-inch Bronze Includes a damper mechanism that provides quiet operation day and night.
  • clean lines and thoughtful design ensure air circulation is efficient and consistent.
  • UNSURPASSED CRAFTSMANSHIP: High-gauge steel with close attention to detail displays our dedication to craftsmanship.
  • EASY SIZING FOR A PERFECT FIT: Measure your duct opening to find the perfect floor grille size. Remove your existing register or vent cover and measure the height and width of the opening. The dimension size provided in the specs for this product refers to the size of your duct opening.
Check Stock

Panasonic PC-NLF06S WhisperLine Installation Kit, Single Inlet 6 Inch Duct

  • Grille Type: Includes a 6-inch single duct inlet grille designed for metal plate.
  • Compatibility: WhisperLine FV-20NLF1 (240 CFM), FV-30NLF1 (340 CFM), and FV-NLF06G 6-Inch Duct Inlet Grille.
  • Flexible Ventilation Design: Designed for spot ventilation or continuous ventilation.
  • Grille Pattern: Features a slotted design with a beveled edge and white finish.
  • Natural Look: Provides a subtle, unobtrusive look that blends with any space or room.
Check Stock