Reviews Voltage Transformation Motor

Transformers Connections: Distibution of electric energy using one-phase transformers (Distribution of Electric Energy)

  • Special attention: the maximum power of the transformer cannot exceed 10W.Input voltage: 110V / 50//60Hz(Red),Output voltage:12V 10VA(Blue). The input line is two red lines, and the output line is two blue lines. This transformer is only used for AC to AC.
  • Product name:Power Transformer,Structure: single phase transformer..
  • Total Size: 75x44x42mm/2.9''x1.7''x1.6''(L*W*H). wires length: 18cm/7.1''. Weight: about 360g..
  • Wide range of uses: power transformers can be used in voltage transformation occasions such as audio and lighting power supplies..
  • Product package:1xPower Transformer .If there is any problem with the switch you received, please contact me by email in time and I will reply you within 24 hours..
Check Stock

KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
  • 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

  • This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
  • 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
  • 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.
Check Stock

Acogedor PWM DC Motor Speed Controller, DC 6-60V 12V 24V 36V 48V 30A PWM DC Motor Speed Controller with Start Stop Switch

  • Fine quality - Made with high quality circuit board which ensures a longer service life.and this simple and easy-to-use DC motor speed controller has an stable performance..
  • Product introduction - The motor speed controller uses screw terminals for convenient and quick wiring. It is equipped with an instantaneous start/stop switch and a speed control potentiometer..
  • Seller's warm tips - 1. The digital display is the percentage non-motor actual speed.
  • 2. The input voltage must be divided into positive and negative, can not input 220V household electricity, the input voltage should be equal to the rated voltage of the motor (6-60V), such as the rated voltage of the motor 12 input 12V motor 36V input 36V motor..
  • Speed Controller Features - Comes with a momentary start/stop switch and a speed control potentiometer..
  • After-sales service guarantee - Acogedor is more than just a brand. If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

  • This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
  • 【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
  • 【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
  • 【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
  • 【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....
Check Stock

Pool Pump Motor, 1-1/2 HP, 3450, 115/230V

  • Price For: Each Hz: 60 Motor Shaft Rotation: CCWSE Phase: 1 Motor Sub Application: Pool and Spa Pump Motor Application: Pump Motor Enclosure Design: Open Dripproof Motor Thermal Protection: Auto Standards: UL Recognized (E25022/46412), CSA Certified (LR43341), UL 1081, 1563, 1795 Approvable Voltage Compatibility: 115, 120, 230, 240, 115/230, 120/240 Shaft: Threaded 3/8-16 UNC-2A.
  • Voltage: 115/230 Shaft Material: Stainless Steel Shaft Length: 1-13/16" Nameplate RPM: 3450 Motor Mounting Type: Rigid Base Item: Pool and Spa Pump Motor Motor Design: Capacitor-Start HP: 1-1/2 Ins. Class: B Shaft Dia.: 1/2" Full Load Amps: 16.0/8.0 Finish: Black Motor Service Factor: 1.00 Motor Bearings: Ball Frame: 48Y Country of Origin (subject to change): Mexico.
Check Stock

AUTOTOOLHOME 6-12V Mini DC Motor High Torque Gear for Traxxas R/C and Power Wheels PCB DIY Electric Drill

  • ...50KTYZ 110V CW/CCW synchronous motor, this motor is a high torque motor,can work for a longt time. Low noise and more robust. This synchronous motor is stable, durable, and compatible. We promise we will tested ever motor before shipment..
  • 【Specification:】 Shaft Diameter: 7mm ； Shaft Length: 14.5mm ； Working Voltage: AC 110V ； Speed: 30-36RPM ； Frequency: ~50/60Hz ； Power: 6W ； Capacitor: 0.56uF ； Tourque: ≤2.5Kgf.cm； Rotation: CW/CCW (controllable)；.
  • 【Application:】An good motor for household, hand-made, school project, model, light, AD and anything you want. Mainly used in instrument, automation, gluing machine, stage lamps and advertising display equipment, curtain automatic control, automatic voltage regulator, electric image, etc..
  • 【Attention:】 1.When the motor is running, it will hot, please do not touch it, It is normal that the motor becomes hot during motor working (the surface temperature may reach to 80-90℃ ). It does not affect the use, please do not worry. 2.Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us. Welcome to bulk purchase and OEM orders!.
  • 【Package:】1 x Synchronous Motor, 1 x Capacitor.
Check Stock

Evaporative Cooler Motor, 115V, Cradle

  • Price For: Each Hz: 60 Motor Service Factor: 1.00 Motor Bearings: Ball Standards: UL, CSA Motor Enclosure Design: Open Dripproof Ring Dia.: 2-1/2" Resilient Ring Dia.: 2-1/2" Ins. Class: B Phase: 1 Max. Ambient Temp.: 40 Degrees C Length Less Shaft: 7-15/16" Motor Sub Application: Evaporator Cooler Motor Application: HVAC/R Ring to Ring Center: 7-7/16".
  • Ambient Temperature: 40C Item: Evaporative Cooler Motor Motor Thermal Protection: Auto Motor Design: Split-Phase Motor Mounting Type: Cradle Base No. of Speeds: 2 Shaft Dia.: 5/8" Frame: 56 Voltage: 115 Shaft Length: 1-7/8" Overall Length: 9-13/16" Nameplate RPM: 1725/1140 HP: 3/4, 1/3 Voltage Compatibility: 115, 120, 115/208-230, 115/230, 120/240 Full Load Amps: 9.8/6.4.
  • Motor Shaft Rotation: CW/CCW Country of Origin (subject to change): China.
Check Stock

DORHEA PWM DC Motor Speed Controller DC 10-55V 24V 36V 48V 60A Stepless Motor Speed Controller with Adjustable Potentiometer Forward-Brake-Reverse Switch and LED Digital Display DC Brush Motor

  • Motor speed controller input supply voltage: DC 10V-55V.
  • The motor speed controller is an aluminum case, very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • The pmw dc motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • The stepless motor knob adjusts the motor speed from 0% ~ 100% smoothly with LED display is accurate to show 0 ~ 100% of the motor speed..
  • The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt, the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
Check Stock

7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
  • ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock