Reviews Voltage Current Meter
Heitune Voltage Meter, D85-3050 Digital DC Voltmeter Ammeter Volt Amp Meter DC0-199.9V DC0-10.00A
- The DC voltage and ammeter can display the measured DC voltage and DC current simultaneously on the same meter screen..
- Wide measurement voltage and current range, DC Voltage: DC0-199.9V.
- The measured DC voltage and DC current are completely isolated within the meter..
- Suitable for chargers, inverters, solar energy, wind driven generator, LED light measurement, etc..
Check Stock200A High Precision Power Analyzer Watt Meter Battery Consumption Performance Monitor with LCD Backlight for RC, Battery, Solar, Wind Power
- 【REAL-TIME READING】200A high precision power analyzer convenient to calculate the voltage, current, power, discharge amount and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Predict model airplane flight time,Choose the best propeller/most efficient motor..
- 【HIGH PRECISION】Current: 0-200A, continuous current 50A, resolution 0.01A. Operates from 4.8-60V (When the test voltage is lower than 5v, a separate 12v power supply is required to power the power meter), resolution 0.01V. Measures 0-6554Wh, resolution 0.01Wh. The current can determine the battery capacity, the continuous current can determine the discharge time, and the maximum instantaneous current can determine the internal structure of the battery to protect circuit..
- 【MULTI-FUNCTIONAL】Watt meter power analyzer can verify sufficient operating voltage under load and prevent peak currents damaging battery, motor control, motors, wiring and connectors.
- Verify correct battery charger operation (connect your battery and charger).
- Set the cut-off voltage and check the battery capacity.
- Detect the receiver and the actual operating current to determine whether UBEC, etc..
- 【BACKLIT LCD SCREEN】Watt meter comes with a 16 * 2 backlit LCD screen, so....
Check StockAutomotive Electrical and Electronics Systems and Components: Testing and Repairs: Use of multimeter for Automotive Electrical Diagnostics
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
- The 117 multimeter features true RMS for accurate measurements on non-linear loads.
- The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check StockPower Supply AC Adapter OEM Replacement for Xbox One S Slim Model NP15-120P1A PA-1131-13MX
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
- The 117 multimeter features true RMS for accurate measurements on non-linear loads.
- The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check StockCAMWAY Portable Clamp Meter Digital 6000 Counts AC/DC Current TRMS AMP OHM Tester Capacitance Multimeter with Alligator Clips
- 【Auto/Manual Ranging & NCV】 The 6000counts Meter Automatically Select Appropriate Decimal Point Place.
- NCV Detects Existence of AC voltage on....
- 【Clamp Measuring】 Clamp Jaw up to 28mm, Clamp Meter Measures AC Current without Interrupting Circuit, Makes it Much Safer to Use on Mains Cables....
- 【True RMS Multi-purpose Clamp Meter】 AC/DC Current, Accurate AC/DC Voltage , Frequency, Duty Cycle, Diode, Temperature Test,Capacitance and....
- 【Continuity Test & Overload Protection Display】 Low Voltage Indication & Overload Protection Designed , Safely Accurately Confirm the Circuit....
- 【Convenient to Use】 Meter size 210×110×45mm Portable . High Resolution , Low Battery Display. Large Backlit LCD Screen Improves Visibility.....
Check StockCharge-Discharge Monitor, DROK 0-90V 100A DC Ammeter Voltmeter, Battery Capacity Amp-Hour Watt-Hour Power Time Multimeter, LCD Display Digital Voltage Current AH WH Watt Meter Tester with Hall Sensor
- 7-IN-1 MULTIMETER --- measure and display voltage (0-90V), current (0-100A), power, battery capacity, amp-hour, watt-hour and time simultaneously..
- APPLICATION --- can be used as battery charge-discharge tester meter for automobile and car battery.
- as battery capacity monitor for photovoltaic system.
- as voltage meter, current meter, power meter, etc..
- BIDIRECTIONAL AMMETER --- the multimeter can detect current in dual direction without changing the wiring direction when used for monitoring charging and discharging..
- PROTECTION --- over-voltage protection, over-current protection, over-power protection, over-charged protection, time limitation, etc..
- automatically/manually switch off LCD screen.
- with output control button to enable/disable output (requires a relay)..
Check StockMilwaukee 2235-20 400 Amp Clamp Meter
- 400A MAX AC/DC CURRENT RANGE: Reads both AC and DC current. With 9 functions it’s the perfect meter for the professional electrician.
- MORE ACCURATE: Equipped with true RMS accuracy this clamp meter won’t leave you guessing weather your readings are correct.
- HIGH SAFETY RATING: Feel safe on the job knowing Southwire’s clamp meter is CAT III 600V safety rated.
- BUILT-IN NON-CONTACT VOLTAGE DETECTOR: Helps identify where live voltage may be present before working on electrical installations or troubleshooting.
- CONVENIENT THIRD-HAND TEST PROBE HOLDER: The clip on the back of the clamp meter allows you to hold a test lead in one hand and the meter and the other test lead in your other hand making the testing process easier.
- BUILT IN WORK LIGHT: The built-in work light is an extra convenience feature that allows visibility even in dimly lit areas.
- WHAT’S INCLUDED: Carrying case, clamp meter, test leads, type K temperature probe with banana plug adapter, AAA batteries and instruction manual.
Check StockDmyond 3pcs DC Panel Digital Dual Display Voltmeter Ammeter Current Meter 0-100V & 0-10A Amp Volt Multimeter 0.28 LED Voltmeter Ammeter Red&Blue
- Working voltage of Meter itself:DC 4 - 30V(The maximum input voltage can not exceed 30V. Otherwise the meter will be burned).
Check StockBattery Monitor, DROK Amp Volt Power Watt Meter DC 0-300V 200A STN LCD Display Panel Meter, Current Voltage Energy Capacity Ammeter Voltmeter Multimeter Gauge with Hall Sensor, 2.5m Shielded Wire
- Multifunctional Meter ---- DROK multimeter panel measures percentage and AH of remaining battery capacity, DC positive and negative bidirectional current, DC voltage, DC power and DC accumulated electric energy. Voltage measurement range is DC 0-300V, current measurement range is 0-200A..
- Hall Sensor & Easy Mount ---- The voltage amperage meter is equipped with a Hall transformer for isolated measurement, which is more reliable and safer. Both two-wire and three-wire connection are available, two wires for testing 5-90V, three wires for monitoring 0-300V. Much more convenient with the long 2.5m shielded wire..
- STN LCD Screen ---- The backlight of this battery capacity monitor can be controlled to be ON or OFF at user’s need.
- Equipped with full view STN LCD screen, users could see the display clearly whenever at night and day, indoor or outside, even under the sunshine..
- Alarming Function ---- The tester will alarm and flash when the real voltage or current is higher or lower than preset alarming ones, or the remaining capacity of battery is low..
- Wide Applications ---- Can be used as dc amp meter, digital volt meter, power meter, battery capacity monitor. Suitable for all kinds of batteries, such as Lead-acid batteries, Lithium Polymer batteries, lithi....
Check StockZOTEK ZT-QS9 Inrush Clamp Meter TRMS 6000 Counts NCV Detector,Auto-ranging Amp Voltage Tester with Backlight Measures AC/DC Current AC/DC Voltage Capacitance Resistance Diodes Continuity
- True-RMS clamp meter:This multimeter can accurately measure 600 Amp AC/DC Current,600V AC/DC Voltage.It is the perfect troubleshooting tool for....
- Inrush Current Meter: The value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting....
- Advanced features:The clamp meter has a low input impedance (LoZ) mode,which can provide higher accuracy readings..
- NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.
- Easy To Use:one-handed operation,With data hold and peak hold,Zero/Fire Wire Identification,Automatically shut down when the meter is not used for 15....
Check Stock