Reviews Void Pro Rgb

3.7v Lithium Ion Battery 1800mAh Replacement for Corsair Void Gaming Headset Corsair Void Pro RGB Wireless Gaming Headset - Dolby 7.1 Surround Sound Headphones and More

  • ➤ 3.7v 1800mAh battery for Corsair wireless gaming headset battery replacement, compatible with Corsair VOID/ Void PRO/ Virtuoso RGB Wireless SE/....
  • ➤ Built-in li-ion battery protection module, battery nominal voltage 3.7v, fully charged 4.2v, Capacity 1800mAh..
  • ➤ Pure Lithium cobaltate cell, higher charge and discharge performance, good consistency.compared with other cell of the same size, pure lithium....
  • ➤ Before replacing, please contrast with the old battery and check the polarity of the battery. Red wire connection power positive " +" , Black wire....
  • ➤ HOW TO SWAP WIRE POSITIONS ?? ---The polarity of the wires was reversed in comparison to the original battery in the headset. This is not a....
Check Stock

Void PRO RGB Fabric Earpads - Replacement Ear Pads Foam Ear Cushion Pillow Parts Cover Compatible with Corsair Void PRO RGB USB Premium Gaming Headset 7.1 Headphone

  • Material: fabric and foam ( the same as original).
  • fit:Corsair VOID PRO RGB USB Premium Gaming Headset 7.1 ( CA-9011155-NA).
Check Stock

CORSAIR Hydro X Series,XC7 RGB CPU Water Block,16 Individually addressable RGB LEDs,Software-Enabled, 115X/AM4

  • The xc7’s nickel-plated copper cold plate and more than 60 high-efficiency micro-cooling fins efficiently draw heat away from your CPU, lowering temperatures and allowing for maximum overclocking..
  • 16 individually addressable RGB LEDs deliver 360° of stunning customizable RGB lighting effects when combined with a Corsair lighting Node PRO or Commander Pro..
  • Transparent flow chamber shows off your coolant and enhances RGB lighting..
  • Add a Corsair lighting Node PRO or Commander Pro and powerful Corsair iCUE software to enable you to customize and instantly Sync RGB lighting across all your Corsair RGB products including water blocks, fans, keyboard, LED light strips and more..
  • Easy and fast installation on Intel LGA 115x or AMD AM4 Sockets with included mounting screws and pre-applied thermal material..
Check Stock

Corsair LL Series LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan 3 Fan Pack with Lighting Node Pro (CO-9050072-WW) & iCUE Commander CORE XT, Digital Fan Speed and RGB Lighting Controller

  • Product 1: 16 independent RGB LEDs in every fan, split between two separate light loops. Airflow - 43.25 CFM. Noise level - 24.8 decibels.
  • Product 1: Software control and customize RGB lighting effects with the included Corsair lighting Node Pro or expand your RGB lighting with more Corsair RGB fans or RGB LED lighting strips (sold separately).
  • Product 1: PWM fan control allows for dynamic speed adjustment between 600 rpm to 1, 500 rpm, minimizing noise or maximizing airflow.
  • Product 1: 120 millimeter fan Blade engineered for Low-Noise operation without sacrificing performance.
  • Product 2: The CORSAIR iCUE COMMANDER CORE XT turns your case into a smart case, using CORSAIR iCUE software to conveniently control up to six case fans and dual lighting channels for multiple RGB components..
  • Product 2: Powers and controls up to six PWM fans for precise adjustment of fan speeds, including Zero RPM mode to keep the noise down at low loads..
  • Product 2: Control up to 264 RGB LEDs out of the box – directly connect up to six CORSAIR RGB fans*, as well as an additional lighting channel to control other CORSAIR RGB devices such as Hydro X Series lighting, RGB LED Lighting PRO Expansion Kit light strips, or an RGB Fan LED Hub with up to six additional RGB fans..
Check Stock

MightySkins Skin Compatible with Corsair Void Pro Gaming Headset - Gray Polygon | Protective, Durable, and Unique Vinyl Decal wrap Cover | Easy to Apply, Remove, and Change Styles | Made in The USA

  • GAME IN STYLE: Show off your own unique style with MightySkins for your Corsair Void Pro Gaming Headset! Don’t like the Gray Polygon skin? We have hundreds of designs to choose from, so your Corsair Void Pro Gaming Headset will be as unique as you are!.
  • DURABLE PROTECTION FOR YOUR DEVICE: Manufactured with ultra-thin, ultra-durable, stain-resistant laminate vinyl in order to effectively protect your gear from dings, scrapes, dust, and the wear and tear of everyday use! MightySkins a SOFT vinyl skin cover, is not made of rubber, silicone or plastic & it is NOT a HARD case.
  • GOES ON AND COMES OFF EASY: Apply your MightySkins vinyl decal easily & with precision on your Corsair Void Pro Gaming Headset thanks to a patented low grip air release adhesive that’s built to last but removes easily and leaves no sticky residue when you’re ready to switch to a different design!.
  • SATISFACTION : Our friendly, knowledgeable staff is here to help and customer satisfaction is our top priority! If you have any issues with your order or you’re not happy for any reason, just let us know and we’ll be there to help!.
  • PROUDLY MADE IN THE USA: Buy with confidence from an American owned and operated company! MightySkins are produced in our state-of-the-art facility in We....
Check Stock

Corsair LL Series LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan 3 Fan Pack with Lighting Node Pro (CO-9050072-WW) & RMX Series, RM850x, 850 Watt, 80+ Gold Certified, Fully Modular Power Supply Black

  • The CORSAIR iCUE Commander PRO turns your case into a smart case, using CORSAIR iCUE software to control up to 6 case fans and 2 RGB lighting channels..
  • Powers up to 6 DC or PWM fans with voltage and PWM control, including the ability to run at zero RPM for total silence..
  • 2 RGB lighting channels provide powerful software control of CORSAIR individually addressable RGB LED strips and CORSAIR RGB fans..
  • 4 repositionable temperature sensors allow you to accurately monitor temperatures throughout your system with CORSAIR iCUE software..
  • 16 independent RGB LEDs in every fan, split between two separate light loops.
  • This product is intended as an expansion of the LL120 RGB LED 3 fan kit with lighting Node PRO. The RGB functionality of this product requires a RGB lighting hub and lighting Node PRO.
  • Pwm fan control allows for dynamic speed adjustment between 600 RPM to 1, 500 RPM, minimizing noise or maximizing airflow. Compatible with CORSAIR iCUE.
  • 120mm fan blade engineered for Low-Noise operation without sacrificing performance.
Check Stock

CORSAIR Hydro X Series,XC9 RGB CPU Water Block,16 Individually-addressable RGB LEDs,Software-Enabled,2066/sTR4

  • The xc9’s nickel-plated copper cold plate and more than 70 high-efficiency micro-cooling fins efficiently draw heat away from your CPU, lowering temperatures and allowing for maximum overclocking..
  • 16 individually addressable RGB LEDs deliver 360° of stunning customizable RGB lighting effects when combined with a Corsair lighting Node PRO or Commander Pro..
  • Premium sandblasted aluminum trim and a transparent flow chamber match any high-end system build and show off your coolant in all its glory..
  • Add a Corsair lighting Node PRO or Commander Pro and powerful Corsair iCUE software to enable you to customize and instantly Sync RGB lighting across all your Corsair RGB products including water blocks, fans, keyboard, LED light strips and more..
  • Easy to install on Intel LGA 2066 or AMD Str4 Sockets with pre-installed mounting screws and pre-applied thermal material..
Check Stock

Corsair Vengeance a7200 Series Gaming PC - AMD Ryzen 7 5800X CPU - NVIDIA® GeForce RTX™ 3070 Graphics - 16GB Corsair Vengeance RGB Pro DDR4 Memory

  • Built with a full range of award-winning CORSAIR components and driven by CORSAIR iCUE software for unparalleled customization andcontrol, the VENGEANCE a7200 Series is powered by an AMD Ryzen 5000 CPU and cutting-edge NVIDIA GeForce RTX 30 Series graphics..
  • An AMD Ryzen 5000 Series processor powers the most demanding games and obliterates multithreaded tasks like 3D or video rendering and software compiling..
  • An NVIDIA GeForce RTX 30 Series graphics card enables a new level of realism with real-time ray tracing technology for unbelievablylifelike graphics and high frame rates..
  • Equipped with CORSAIR VENGEANCE RGB PRO DDR4 high-performance memory, optimized for AMD and lined with stylish RGB LEDs..
  • Show off your system with brilliant system-wide RGB lighting on the included H100i RGB PRO XT cooler, SP RGB ELITE fans, and VENGEANCE RGB PRO DRAM, creating synchronized light shows with pre-installed signature lighting profiles, your own custom-created profiles, or integrated lighting that dynamically reacts to the game in real-time when playing select titles..
Check Stock

CORSAIR Vengeance a7200 Series Gaming PC - AMD Ryzen 9 5900X CPU - AMD Radeon™ RX 6800 XT Graphics - 32GB CORSAIR Vengeance RGB PRO DDR4 Memory

  • Built with a full range of award-winning CORSAIR components and driven by CORSAIR iCUE software for unparalleled customization and control, the VENGEANCE a7200 Series is powered by an AMD Ryzen 5000 CPU and cutting-edge AMD RADEON RX 6800 Series graphics..
  • An AMD Ryzen 5000 Series processor powers the most demanding games and obliterates multithreaded tasks like 3D or video rendering and software compiling..
  • The AMD Radeon RX 6000 Series graphics cards power a new generation of competitive and 4K gaming with vivid visuals, and elevated experiences in every game and every frame.
  • Equipped with CORSAIR VENGEANCE RGB PRO DDR4 high-performance memory, optimized for Intel and lined with stylish RGB LEDs..
  • Show off your system with brilliant system-wide RGB lighting on the included H100i RGB PRO XT cooler, SP RGB ELITE fans, and VENGEANCE RGB PRO DRAM, creating synchronized light shows with pre-installed signature lighting profiles, your own custom-created profiles, or integrated lighting that dynamically reacts to the game in real-time when playing select titles..
  • Powerful CORSAIR iCUE software allows you to monitor your system’s performance and instantly sync RGB lighting across all your iCUE-compatible CORSAIR RGB products, including fans, DRAM, and more.
Check Stock

YUNZII Keycap Set, 140 keycaps PBT Dye Sublimation keycaps Cherry Profile Custom Keycaps for Mechanical Keyboard(Cherry Profile, Otter)

  • 【Custom Hot-swappable Switch】 Unique to the KC84 Pro design is the combination of frosted translucent case and hot-swap capability. Hotswappable Gateron switch of KC84 Pro can be easily replaced by other 3 pins or 5 pins hotswap switches without soldering. You can customize the keyboard easily and change out the switches to have a completely different tactile experience..
  • 【Frosted Translucent Case & RGB Baclight】 The 75% keyboard case is made out of frosted ABS material so the lights could shine through the case but not too dazzling. The keyboard has fully programmable RGB LEDs, 16.8 Million Color combinations , multiple backlit mode, which is designed to brighten up any space..
  • 【PBT Shine Through Keycaps】The keycaps of KC84 Pro applies top-grade 85% PBT material, which generally last longer than ABS equivalents. The translucent ledgends of the keycaps enhances RGB effect of each key..
  • 【Macro recording &Customized RGB effects】With the driver, you can customize the RGB effects massive lighting effects and macro setting. (Driver download web in the product description part and manual.).
  • 【Compact and Ergonomic】 The KC84 Pro is suitable for all environment, Home & Office use, fits right in backpack. Less hand movement and space while stil....
Check Stock