Reviews Voice Response System

Rockville HT120 2 360w Car/Pro Aluminum Horn Titanium Tweeter w/ 2 Voice Coil Black

  • What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual.
  • Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver.
  • RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil.
  • Ferro Fluid Enhanced Voice Coil Cooling, Impedance: 8 Ohms, Frequency Response: 800Hz - 20kHz, We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave, Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving.
  • Horn Dimensions: 6.2” x 6.2” x 5.1” (158 x 158 x 130 mm), Throat Diameter: 2", Overall Depth: 7.6” (193 mm), Cutout Diameter: 5.79”, Mounting Depth: 7.36”, Extremely loud and clear highs with an amazing frequency response that can even play some mids, Shallow Mounting Depth.
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • Features: Pair MB Quart FSB216 6.5" 280 Watt Component Car Speakers. RMS Power Handling: 70 Watts (Per Speaker) / 140 Watts (Per Pair). Peak Power Handling: 140 Watts (Per Speaker) / 280 Watts (Per Pair). Speaker Impedance: 4 Ohms. Frequency Response: 55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
  • Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling S....
Check Stock

Logitech 981-000541 G230 Stereo Gaming Headset with Mic

  • Soft and Durable Cloth Earpads, Lightweight Design. Headphone Frequency response-20Hz-20KHz. Microphone Frequency response-50-20KHz.
  • Folding, noise-cancelling boom mic: Reduces background noise for clear voice pick up and rotates up and out of the way.
  • On-cable sound controls: Volume dial and mute switch are close at hand for quick audio adjustments.
  • System Requirements - Windows 8, Windows 7, or Linux operating system, Headset and microphone inputs.
Check Stock

PA Speakers Bluetooth System 12 Inch Active & Passive Powered Speakers with MP3/USB/SD Radio/AUX Input.Wired Microphone,Speaker Stands,Remote Control,Dust Bags.…

  • 【Enjoy High Sound Quality】: JGA ELECTIONCS PA Speaker System with 12” Full range woofer 30Oz, 38mmV.C., 8Ohm. With 25mm Voice Coil Titanium Horn Driver 4 Oz, 4Ohm, advanced technology brings you unparalleled sound quality enjoyment..
  • 【Multifunctional Connection】: Active speakers with MP3 SD USB Bluetooth 3.5MM/6.35MM input, various connection methods bring you more choices, you can connect to mobile phone/computer/tablet/electric guitar/Line in, compatible with various Equipment, to bring you the most perfect experience..
  • 【Wide Sound Coverage】: The Frequency Response of the Active Speaker is Frequency response: 60Hz-18KHz. We designed this powerful PA system to ensure your voice will be heard by everybody! Whether used in parties/conferences or speeches, it can bring you the best experience..
  • 【Portable PA Speaker System】: The powered speaker system comes with two tripods. You can easily carry these speakers wherever you go. So you can easily put into the trunk of your car..
  • 【Suitable for Multiple Places】: This PA Speaker System is suitable for indoor and outdoor, whether it is a speech/party/karaoke/work conference or a personal concert, JGA speakers can meet all your needs, allowing you to enjoy music anytime, anywhere.
Check Stock

2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78

  • 700 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 112dB/w/m sensitivity and 4-8 ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 2” KAPTON VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth.
Check Stock

7

  • Utilizes a CCA 1" voice coil to maximize loudness per watt..
  • 240w peak power and 120w program power will make these compliment your entire system.
  • Mounting depth of only 4.56 which gives them extreme mounting versatility..
  • Removable voice coil so if you happen to need to repair on the go, it can be done in minutes..
  • Wide frequency response of 800HZ to 20KHZ so you won't miss one high-hat or cymbal crash..
Check Stock

4x10 Inch Horn Tweeter Speaker - Heavy Duty 200 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 20 Oz Magnet Structure, 102 dB, 8 Ohm Impedance - Pyle PH391

  • 200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style.
  • 1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D.
Check Stock

12 Inch Car Midbass Woofer - 700 Watt High Powered Car Audio Sound Component Speaker System w/High-Temperature Kapton Voice Coil, 35Hz-4kHz Frequency, 90 dB, 8 Ohm, 60 oz Magnet - PylePro PPA12

  • 700 WATT POWER: This high powered audio projection woofer system has a maximum power output of 700-watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 35Hz - 4kHz FREQUENCY RESPONSE: This high-performance car woofer speaker has a frequency response of 35Hz - 4kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 90 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • 12 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 12" woofer strong black paper cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 60 OZ MAGNET STRUCTURE: This woofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped plastic basket & cloth edge suspension provides a strong foundation. It is also super easy to install to your vehicle's sound system.
Check Stock

Pyle 8 Inch Car Midbass Woofer - 360 Watt High Powered Car Audio Sound Component Speaker System w/High-Temperature Kapton Voice Coil, 200Hz-5kHz Frequency, 94 dB, 8 Ohm, 35 oz Magnet - PDMR8

  • 360 WATT POWER: This high powered audio projection midbass system has a maximum power output of 360-watt peak power / 180 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 200Hz – 5kHz FREQUENCY RESPONSE: This high-performance car midrange woofer has a frequency response of 200Hz – 5kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • KAPTON VOICE COIL: This car speaker has 1. 5” high-temperature kapton voice coil, 94 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 8 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 8″ midbass paper coating cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 35 OZ MAGNET STRUCTURE: This mid speaker has 35 oz magnet structure. The heavy-duty housing and structure provides a strong foundation, and it is also super easy to install to your vehicle’s sound system w/ 3. 03” mounting depth.
Check Stock

10-Inch Carpeted Subwoofer Tube Speaker – 500 Watt High Powered Car Audio Sub Bass Enclosure System with 2” Aluminum Voice Coil, 4 Ohm, Rear Vented Design – PLTB101

  • 500 WATT POWER: This high powered audio projection carpeted subwoofer tube enclosure system has a maximum power output handling of 500 watts so you can play your favorite tracks as loud as you want and with style.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 18.9” x 13.4” x 12.2” in inches.
  • 2” ALUMINUM VOICE COIL: This car speaker has a 2” aluminum voice coil with a 4-ohm impedance rating that compensates for the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • ADDITIONAL SUB-BASS RESPONSE: Featuring a bass reflex vent, this carpeted subwoofer tube speaker has additional response for low-frequency waves, allowing you to enjoy a much more bassy sound for your music.
  • BUILT TO LAST: Constructed with engineered 15mm particleboard, this tube speaker will surely prove its longevity for vehicle use. It also only weighs at about 14.55 lbs, offering little to no hindrance at all to the maximum weight of your vehicle.
Check Stock