Reviews Viscosity Measurement Tools

BAOSHISHAN Rotary Viscometer Viscosity Tester 10-100,000mPa·s Fluidimeter Meter Newton Liquid Viscometer (NDJ-1)

  • [±5% ACCURACY] The viscometer uses a graduated disk, and the viscosity values are measured by moving the rotor rotation through the spinneret and spindle, has a large viscosity measurement range 10-100,000cps and the measurement error: ±5%, give your enough resolution to control my processes better..
  • [ROTORS x ROTATION RATE] Different rotors (1,2,3,4) can be selected according to the viscosity range of different test liquids, and different speed (60,30,12,6) can be set. The knob adjustment is straightforward with a coefficient table on the top for easy reference. You can unlock more unknown liquid viscosity..
  • [LIGHT WEIGHT BUT PRACTIALl] The rotary viscometer is light in weight, easy to move and operate flexibly. The helical gear lifting system effectively ensures that the viscometer can move up and down easily without sliding down by itself, which ensures the smooth progress of your experiment..
  • [APPLICATION] NDJ-1 has been widely used to determine and measure the liquid viscosity in many application such as grease, painting, plastic, pharmacy and adhesives. There are no limitations about the liquid, just put the rotor into the liquid and test it. But the liquid you measure should NOT exceed 80℃.
  • [GOOD WARRANTY] Viscosity meter tester is a precison ....
Check Stock

80 Pieces Can Vinyl Stickers Can Skin Decals Printed Can Labels Vinyl Labels Set Case Vinyl Skin Tags for Cans Cases Boxes

  • Package contents: you will receive 80 pieces can vinyl stickers in different styles, sufficient quantity for your daily application and replacement, and you can also share some of them with your friends, office colleagues and more.
  • Durable material: the can skin decals are constructed with the quality vinyl PVC material, waterproof and durable, the printed letters are clear and will not fade or tarnish, smooth surface touches comfortable and they can be applied for a long time.
  • Good viscosity: the can decal set will not lose their viscosity due to moisture, which can stick on the pasted surface firmly and tightly, and will not leave any residue or traces after peeling off, supporting a long time service.
  • Suitable dimension: each can labels measures approx. 1 x 3 inch, appropriate measurement for you to stick on different cans or other places just for a retro decoration, which looks quite decent and classic.
  • Simple application: the vinyl labels are easy to use, first clean and dry the pasted surfaces, then peel off the protective cover and then directly stick the labels on the cans or cases, simple and convenient for your application without any requirement of tools.
Check Stock

The Enchanted Files: Cursed

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Promare [Blu-ray]

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 100

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 75

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 200

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 350

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

CORSAIR 7000D AIRFLOW Full-Tower ATX PC Case, White

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Homemade Perfume: Create Exquisite, Naturally Scented Products to Fill Your Life with Botanical Aromas

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock