Reviews Viscosity Gauge

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ...GNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover protected 3-1/2" large dial. 0-500psi and 0-35bar bi....
Check Stock

Hoppes 9 Elite Gun Cleaning kit - Gun Bore Cleaner and Lubricant Oil with 14.9 ML Precision Lubricator and 25-40 Patches for .38, 9mm.40.44 and .45 Caliber

  • 2 OZ HOPPES NO 9 CLEANER SOLUTION - Ultra Effective and potent solvent for removing primer, powder, lead and metal fouling for preventing rust. Quick, super-efficient, safe and easy to use. Flows freely and penetrates rapidly..
  • 2 OZ HOPPES NO 9 LUBRICATING OIL - High viscosity oil refined to perfection for use in firearms, fishing reels and other precision mechanisms. Does not harden, gum or become rancid. Gives extra-long service..
  • 14.9 ML PRECISION LUBRICATOR - A full bottle of the 14.9 ml Needle Point Hoppe's No. 9 oil lubricant. High-viscosity oil refined to perfection. Extra-long lasting.
  • WeEnergise 2” SQUARE 40 COUNT PATCHES- High thread count with tightly woven material along with double napped on both sides creates a superior cleaning patch that have become known worldwide for their unparalleled cleaning ability. Often imitated, never duplicated! Fits .38-.45 Caliber/.20-410 Gauge (Warning: They are all Cotton - threads may come off causing to leave more residue).
  • LIFE TIME WARRANTY - Love them or we will buy them from you, no question asked.
Check Stock

Megaforce

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
  • Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock

FACTUAL DENTAL 100 PCS 20 Gauge Black Pre Bent Tips Dispensing Dental Applicator Flowable Composite Sealant Oral Irrigation Mix 20G Black

  • I. FACTUAL DENTAL 100 pcs 20 gauge black pre-bent needle tips.
  • II. Disposable tips are ideal for lab and dental office.
  • III. The blunt pre bent needle application tip allows easier access to dispense with slight pressure.
  • IV. Applicator tips are made of high quality stainless steel and plastic.
  • V. The fluid dispensing is proportional to the viscosity of the materials used.
Check Stock

Viscometer Adapter 0 Rotor for Digital Rotary Viscometer Viscosity Meter Tester, Low-Viscosity(0-20mPa.s) Liquids Test

  • 1.According to ASTM D 4212 (Standard Test Method for Viscosity Cup Immersion)standards.
  • 2.Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil..
  • 3.Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes.
  • 4.Mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect..
Check Stock

Tri-Flow TF23004 Clear Synthetic Grease - 3 oz Tube Red

  • Liberty Oil comes in a 1-fluid-oz bottle with a stainless steel needle tip dispenser. Because it is premium quality 100% clear non-staning oil it....
  • The bottles are new using LDPE, which is a very soft plastic that is easy to squeeze. You will also receive a 1.5inch 18-gauge stainless steel needle....
  • Oil is blended from the finest high viscosity index solvent refined hydro-finished 100% pure paraffin base stocks available..
  • Comes with a 30 day no questions asked return policy. If you are not 100% happy with your purchase I will refund your money..
  • Comes with a medical grade 1 1/2 inch long stainless steel needle tip applicator for precision oiling with no mess..
Check Stock

Westlake Market 40 Caliber Quality Gun Cleaning Bore Snake Bore Cleaner and Lube Oil in Neoprene Case Fits .40 Cal Guns

  • High Quality Westlake Market All in One .40 Cal, 410 Gauge Bore Cleaning Snake with 2 Inline Bronze Bristle Brushes.
  • Hoppes 2oz No 9 Cleaner for cleaning pistols, rifles, shotguns and more!.
  • HOPPES LUBRICATING OIL - High viscosity oil refined to perfection for use in firearms, fishing reels and other precision mechanisms. Does not harden,....
  • Comes with a Quality Westlake Market neoprene case to keep it all together..
  • 100% MONEY BACK OR REPLACEMENT WARRANTY- We place value on every customers experience. We provide 100% Money back or replacement warranty if there is....
Check Stock

Mobil 1 0W-40, Engine Oil, 1 qt.

  • Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
  • Flash Point: 230 Degrees C Country of Origin (subject to change): United States.
Check Stock

GLTL Paint-4 Liquid Viscosity Test Tool w/Viscometer Flow Cup Viscometer Ford Cup 4# Flow Viscosity Cup Liquid Flow Meter Liquid Viscosity Tester with Base

  • ★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》.
  • --The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use..
  • ★ 4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time..
Check Stock

Motul 107972 Set of 2 6100 SYN-nergy 5W-30 Motor Oil 5-Liter Bottles

  • Advanced Technosynthese lubricant for High Performance/Protection.
  • Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
  • Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
  • Can be mixed with synthetic/mineral oils..
  • Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..
Check Stock