Reviews Vinylester Resin

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.
Check Stock

Fiberglass Cloth 6 Ounce by 50 Inches Wide - 3 Yards - 37.5 sq/ft for Boat and Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar StripCanoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.
Check Stock

Fiberglass Cloth 6 Ounce by 60 Inches Wide - 10 Yards Rolled- 150 sq/ft for Boat and Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

Bubujia 13\ Fiberglass Fabric Cloth Mesh, 6 Oz. Fiberglass Mat Material Roll Woven Roving for Tub Shower Boat Pool Repair (164 Feet)

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This 4 ounce cloth is 0.0059” thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 4 oz. cloth is the standard “E” glass volan-finished cloth Style 1522.
Check Stock

Yikai Fiberglass Woven Roving Cloth (2.6 Oz, Plain Weave), 8.6\inch x 164'feet (22cm x 50m) Long for Boat & Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

Fiberglass Chopped Strand Mat Cloth 50' x 360' | 50 Inch Wide 10 Yard Long | 1.5 oz | CSM GRP | Molding Roofing Boat Marine Repair with E-Glass Fiber Roll | Resin Compatible | Rolled Package

  • ✅ Fiberglass Mat is the most commonly used reinforcement in composites.
  • ✅ Chopped Strand Mat is randomly dispersed fiber mat that has equal strength in every direction. Compatible with polyester and vinylester resin..
  • ✅ Conforms to tight curves and corners. It can be torn or cut to size..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity ep....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity ep....
Check Stock

Bubujia 12\ Fiberglass Fabric Cloth Mesh, 2.6 Oz. Fiberglass Mat Material Roll Woven Roving for Tub Shower Boat Pool Repair (164 Feet)

  • Dimensions: 10.9 yard roll (32.8 feet) X 39.3 inches wide for an area of 108 sq. ft.
  • Excellent Features: The 9.5oz fiberglass cloth is popular for a wide range of lightweight applications like laminating, reinforcing, sheathing and waterproofing. It is a flexible fabric and it wets out transparently. Fiberglass mat is the most commonly used reinforcement in composites..
  • Well-proportioned: This fiberglass cloth pack provides a uniform strength horizontally and vertically..
  • General Repair: Fiberglass cloth is a smooth, lightweight cloth. And is often used on surfboards, sailboats, cedar strip canoes, or other applications including pool, automotive or marine repairs..
  • Universal Use: Compatible with Epoxy, Polyester and Vinylester Resin..
Check Stock