Reviews Video E1 Multiplexer

Evertech 8 Channel Analog CCTV Video Multiplexer Color Quad Processor Screen Splitter with Remote Control

• 8 Channel CCTV Video Multiplexer Color Quad Processor compatible with all Analog Security Cameras. NOT Compatible with 720P/1080P AHD / TVI / CVI / HD-SDI CCTV Cameras..
• Multiple display modes: 8 camera view, 4 camera view, 2 camera view, single camera view, PIP (picture in picture).
• NTSC and PAL Video Format Supported. Resolution PAL: 720 x 576.
• 8 Channel BNC Video Inputs, 1 BNC VCR In, 1 BNC VCR Out, 1 BNC Monitor. Image Freeze Function, Selectable Image Zoom Area, Video Loss Detection, Motion Detection, Auto sequence.
• Power Supply adapter, remote control and user manual included..

AllAboutAdapters Composite S-Video to Component Video RGB Sync On Green Converter

• Dual-purpose composite RCA video and S-video to YUV/RGB converter with selectable component video output and 15Khz RGsB output. Selectable composite video/s-video input via manual push button..
• Selectable video output format between 15Khz RGsB and interlaced YCbCr. Converting standard composite video or S-Video signal into interlaced component YCbCr video output at 480i/576i for TV or projector display..
• Converting standard composite video or S-Video signal into RGB at 15.625Khz/50Hz or 15.734Khz/60Hz ouput for RGB monitor display. Restores analog video feed to component/RGB type video with all the vibrant and rich color information accurately presented again..
• Crisp and clean output with full color depth via component/RGB format. Great video adapter for connecting CCTV video surveillance camera system or DVR, quad processor or video multiplexer to component video or RGB video for large screen display..
• Premium SOG video sync adapter for monitors requiring RGB sync on green type for the input. Automatic video input system detection for NTSC/PAL/SECAM devices. Supports worldwide video system including NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N and SECAM..

InstallerCCTV Video Quad Color 4CH Multiplexer 2 BNC Output with Remote Control and Free 1Amp Power Adapter…

• Full quad display at real-tme refresh rate.
• Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
• Free 1A Power Adapter and remote control Included.

16-Channel BNC Video Multiplexer Picture-in-Picture Video Processor

• Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously..
• Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console..
• 16 individual input buttons for fast switching between each video input. 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording..
• 4 audio inputs with 1 audio output. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation..
• Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time..

20PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

• Process Digital Signals: Because the multiplexer can also process digital signals, you can use it to transfer TTL level serial data to multiple devices through pipe or transfer from multiple devices..
• High Level: Drive it to high level, and it will completely disconnect the common pins (all switches are disconnected)..
• Scope of Application: It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• 16 Channel Analog Multiplexer: This is a very convenient 16 channel CD74HC4067 analog, digital multiplexer, demultiplexer..
• Bidirectional Internal Switch: With a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..

Analog Devices ADG509ATQ Analog Multiplexer

• 【16-channel Analog Multiplexer】- This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• 【Used for】- It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• 【Process Digital Signals】- Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• 【Bidirectional Internal Switch】- The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on..
• 【Note】- Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..

CCTV Camera Pros VM-16RT BNC Video Mux | 16 Channel CCTV Security Camera Multiplexer | Real-time Live Streaming Refresh Rate | Monitor Spot/Loop Out

• 16 Camera Inputs - Supports up to 16 Analog cameras via the 16 BNC video inputs..
• 16 Camera Outputs - 16 BNC video loopouts allow each camera to be connected to additional devices such as DVRs or VCRs..
• Supports PTZ Cameras - The RS-485 terminals can control the motions of pan, tilt, and zoom (PTZ) cameras..
• Rackmountable Case - The 1U rackmount case gives users the option to mount it in a standard 19 inch server rack..
• Multiple Viewing Modes - This video multiplexer supports multiple camera grid displays including a 16 channel, 8 channel, 4 channel, 1 channel, PIP, and more..

20Pcs HEF4051BT SOP-16 HEF4051B SOP16 F4051B 8-Channel Analog multiplexer/demultiplexer

16-Channel RCA BNC Video Multiplexer Picture-in-Picture Generator

• Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console. 16 individual input buttons for fast switching between each video input..
• 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation..
• Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time. Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, moti....

4-Channel Mini Quad Video Processor with IR Remote + Multi-View Screen

• Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console..
• 16 individual input buttons for fast switching between each video input. 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output..
• 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation. Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time..
• Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, moti....