Reviews Vertical Oil Pressure Switch

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • . 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", ....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V

  • Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
  • Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
  • High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
  • Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Engine Oil Pressure Sensor Switch..
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high accuracy reading of actual oil pressure in vehicle's engine.★★In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All engine oil pressure sensor units are tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. simple structure, easy to install, plug and play, very convenient.★★★ Only 10 mins less for installation.Save your time and money, check youtube video if you have installation problem..
  • 【REPLACES PART & MODEL】 Replaces# 1267....
Check Stock

SCITOO PS417 25070-CD00A Oil Pressure Sensor Switch Fit 2003-2009 for Nissan 350Z, 2005-2006 for Nissan Altima, 2005-2008 for Nissan Armada, 2004-2009 for Infiniti QX56 Oil Pressure Sending Unit

  • COMPATIBLE VEHICLES - Oil pressure sensor for 2004 2005 2006 2007 2008 2009 for Infiniti QX56, 2003 2004 2005 2006 2007 2008 2009 for Nissan 350Z, 2005 2006 for Nissan Altima, 2005 2006 2007 2008 for Nissan Armada, 2005 2006 2007 2008 2009 for Nissan Frontier, 2009 2010 for Nissan GT-R, 2004 2005 2006 2007 2008 2009 for Nissan Pathfinder, 2009 for Nissan Sentra, 2004 2005 2006 2007 2008 for Nissan Titan, 2005 2006 2007 2008 2009 for Nissan Xterra.
  • ADVANTAGES - The oil pressure switch is reliable in operation, extremely high in air pressure accuracy and long in working life. It effectively solve oil pressure gauge reading is not accurate, oil pressure switch engine light come on and low oil pressure problems..
  • PERFORMANCE - Engineered with high-quality materials to ensure trouble-free performance..
  • MATERIAL - Made of high quality & durable material that meets OE standard.100% new oil pressure sensor, not refurbished or re-manufactured parts..
  • GUARANTEE - One Year Warranty available for our this item.Please check picture, OE part number and fitment information to verify this is the correct one you need before your purchase..
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with Honda, Ryobi, Simpson, Craftsman Homelite and More

  • OEM replacement pump for your pressure washer: Fit most 7/8" shaft vertical gas pressure washer engines. Compatible for Craftsman, Subaru, Homelite, Ryobi, Honda, Husky and more. This easy-to-install kit is great for power washers that can support up to 3000 PSI at 2.5 GPM to wash cars, sidewalks, fences, vehicles, and more..
  • Easy start & maintenance-free: This pump pre-fill oil for lifetime, so you never have to change the oil. It is also manufactured from fully die-cast aluminum for good against corrosion. If the pressure washer is not used for a long time, we recommend that you uses a anti-freeze and lubricant formula, for use before extended storage and prior to startup the following season to keep your pump running on full blast..
  • Easy installation: This replacement pump features a threaded M22 connection pressure washer hose outlet, 3/4'' NH garden hose inlet. The standard bolt pattern fits most 7/8'' vertical shaft gas-powered pressure washers. Packet includes a chemical hose with filter, mounting bolts, shaft key, and instruction booklet to get your pressure washer back in life within 10 minutes. (*Fit 7/8'' vertical shaft engines ONLY).
  • A high-quality thermal relief valve is matters: It protects the pump from overheating while in bypa....
Check Stock

Jabsco Hotshot HD4-12V 4GPM 60PSI Heavy Duty Washdown Pump

  • Maximum vertical lift of 70 feet to the home, cottage or farm.
  • This pump can be used either in a shallow well application with a maximum vertical lift of 25 feet, or in a deep well application (with the ejector in the well) for a maximum lift of 70 feet.
  • The large cast iron body is easy to prime.
  • The pump can deliver a maximum pressure of 65 PSI, but comes assembled with a 30/50 PSI pressure switch.
  • Extended protection plan available up to 5 years warranty.
Check Stock