Reviews Vent Cap

Locking Pre-vent Cap for Auxilary and Transfer tanks

  • THIS ITEM HAS BEEN REPLACeD BY THE NEW AND IMPROVED FSS 754.
  • The Flow Security Systems PRE-VENT Fuel Cap represents the latest in fuel cap technoloy. The FSS 750 pre-vent cap is designed to permit the controlled release of fuel tank pressure from volatile fuels. When removing the cap to refuel a 1/2 turn of the cap releases the fuel tank pressure before the caps sealing gasket is released from the filler neck. This feature dramatically reduces the possibility of fuel expulsion from the filler neck when the cap is removed. The FSS 750 pre-vent security cap is for use on diesel, transfer and auxilary tanks. Allows pumping of fuel at 15 gpm without removal of cap. The FSS 750 pre-vent security cap helps to maintain fuel quality by reducing condensation and evaporation loss..
  • Patented Spinsecure design prevents unauthorized access to fuel, Suitable for use on all tranfer tanks.
  • For use on all 2” female threaded tanks, Tubular lock and key with over 50,000 combinations.
  • Can be keyed alike for multiple use convenience, Has weather proof self-closing latch covering the face of the lock.
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • ...s tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the i....
Check Stock

Tusk Billet Aluminum Gas Cap Black Machined - Fits: Yamaha RAPTOR 700 2006-2018

  • Premium Material: Universal gas can vent cap is made of premium stainless steel and premium rubber, rustproof and durable..
  • Leak Proof Design: Gas can replacement vent cap is designed with screw caps and double rubber sealing rings that can ensure leak proof..
  • Vent Cap: Fuel can air vent caps can be used for all kinds of 3 or 5 gallon gas can or other plastic gas or water can, provide a vent and make the fuel or water pour out quickly and smoothly..
  • Easy Operation: Simple to install the valve stem and rubber sealing ring onto the can via a wire after drilling a hole through the can, then screw on the dust cap finished.(It's better to drill a hole on high and back of the can, avoiding the handle because it's thicker.).
  • Packing List: The package will come with 6 pieces gas can vent caps, 1 piece drill, 1 piece wire,1 piece wrench and 6 pieces stickers..
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • ...thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
  • Simple to install, Each set of products includes, 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread) 1 yellow Spouts and rubber gaskets, 1 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the ....
Check Stock

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • ...thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
  • Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 yellow Spouts and rubber gaskets, 2 nozzle caps with threads，2 kinds of gas con vent caps, And the drill bit required to install the gas discharge c....
Check Stock

EZ-POUR Gas Can Replacement Vent 2 pack - Update Your Gas Can!

  • EZ-POUR Push In Vent Updates The Cap On Your Flow Hole.
  • Got An Old Gas Can With A Bad Vent? Update It Today.
  • Push In Vent Cap Fits Many Old Blitz, Midwest, and Many Other Can Styles.
  • Having a Flow Hole Increases Pouring Speed and Consistency - Add A 1/2" Hole.
Check Stock

Dee Zee DZ97960 Auxiliary Transfer Tank Connector Kit

  • Fuel tank spouts are made of high strength ABS plastic, improved gasket more durable.
  • Replacement gas can spout kit update your old cans instead of buying a new one.
  • Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss.
  • Flexible nozzle make gas/water easily flows out without the need for other devices and no more spilling.
  • Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap. 3 Kits included.
Check Stock

TruePower Replacement Spout and Vent Kit + Extra Gaskets (Red)

  • Fuel tank spouts are made of high strength ABS plastic, improved gasket more durable.
  • Replacement gas can spout kit update your old cans instead of buying a new one.
  • Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss.
  • Flexible nozzle make gas/water easily flows out without the need for other devices and no more spilling.
  • Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap. 3 Kits included.
Check Stock

EZ Pour 10050 Replacement Spout Kit

  • Fuel tank spouts are made of high strength ABS plastic, improved gasket more durable.
  • Replacement gas can spout kit update your old cans instead of buying a new one.
  • Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss.
  • Flexible nozzle make gas/water easily flows out without the need for other devices and no more spilling.
  • Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent....
Check Stock

Camco Replace-All Plumbing Vent Cap with Spring Attachment - Replaces Lost or Damaged RV Plumbing Vent Caps | Fits Up to 2\ Plumbing Vent Pipe - White (40034)

  • Replaces lost or damaged RV Plumbing Vent Caps.
  • Made with UV inhibitors to extend the life of your vent cap.
  • Features spring tension attachment, which eliminates the need to replace the entire vent.
Check Stock