Reviews Vct Plank

MantisTol 13 Heavy duty Vinyl floor cutter LC-330,For WPC,LVT,VCT and Rigid Core Vinyl Plank.

  • Design for cutting LVP, WPC, LVT, VCT,PVC,SPC,Vinyl Plank Flooring. It can't cut Laminate,Engineered floor or other hard plank .So don't try to cut....
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle....
  • 3mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade....
  • If you find that you need a lot of force during the cutting process, need to repair the sharpness of the blade. Replacement....
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

ROBERTS 10-95 Cutter for Laminate, Engineered Wood, Carpet Tile, and Vinyl Floors, 25 in.

  • Guillotine-style cutter, cuts vinyl plank flooring, vinyl siding, VCT, LVT, WPC, Allure, laminate, engineered wood, carpet tile, MDF baseboard, rubber tiles and foam tiles.
  • Cuts flooring up to 25 in. wide, 17 in. diagonal and 5/8 in. (16 mm) thick.
  • Long-lasting 25 in. tungsten steel blade features a sharp cutting edge.
  • Swivel miter guide for 45-degree angle cuts.
  • Extruded aluminum support base with a comfortable, solid plastic working area.
Check Stock

CUTTEREX 13 Professional Laminate Floor Cutter Vinyl Floor Cutter for VCT LVT SPC PVC LVP WPC Rubber Floor and Rigid Core Vinyl Plank with Knee Pads

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" or 330mm Width, Up to 5/8" or 15.80mm Thickness on Engineered Wood Floor, VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor, Vinyl Plank Floor and Rigid Core Vinyl Plank, also Cuts PVC Tile, Vinyl Tile, Fiber-Cement Board Siding, Vinyl Siding, Pressboard Lap Siding, Carpet Tile, Leather, Rubber Base, Rubber Tile, Soft Plastic.
  • ✅OUTSTANDING VALUE: No Dust, No Noise, No Electricity Needed, Easy and Professional Cutting on Vinyl Floor, NO Go Out and In House, NO Go Up and Down Stairs, Time and Labor Saver..
  • ✅SAFE OPERATION: Includes CUTTEREX Knee Pads, Stay Protected, Stay Safe! Dust Free, Quick & Quiet. Long Handle for More Cutting Power Made Operation Easy..
  • ✅CUTS MOST SHAPES ON FLOOR: Straight Cut and Cuts at 0-45° Free Angles.
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Angle Indications on Support Table, Integrated Straight Cutting Fence..
Check Stock

WORKPRO 13\ Floor Cutter With Safety Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes on any terrain faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. The 600D polyester fabric with breathable mesh for all-day comfort even in summer.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

WORKPRO Laminate Floor Cutter With Work Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes from the stone, nails, glass shards faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. Helps reduce knee pressure from heavy work on hard floor or concrete.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

AFVO Mini Quick Release Plate QR Plate Replacement for Sony VCT-60AV VCT-D580RM VCT-D680RM VCT-R640 and More 2PCS Pack

  • 2PCS 43 x 43mm drop-in bottom fitting. Allows quickly attach and detach your camera from the tripod.
  • UNC 1/4-20 interface, made of ABS Resin, Lightweight and durable.
  • Matte surface of non-slip design, with cameras on will not twist, 6.6lb load capacity.
  • Little black spring loaded pin double prevents cameras on from twist.
  • Compatible with Sony D680 580 VCT-580RM, VCT-680RM, VCT-50AV, VCT-60AV, VCT-80AV, VCT-R640, VPR1.
  • For Somita ST-3540 /666 3520 3560, for Velbon....
Check Stock

AFVO Mini Quick Release Plate QR Plate Replacement for Tripod Clamps for Sony VCT-60AV VCT-D580RM VCT-D680RM VCT-R640 and More

  • 43 x 43mm drop-in bottom fitting. Allows quickly attach and detach your camera from the tripod.
  • UNC 1/4-20 interface, made of ABS Resin, Lightweight and durable.
  • Matte surface of non-slip design, with cameras on will not twist, 6.6lb load capacity.
  • Little black spring loaded pin double prevents cameras on from twist.
  • Compatible with Sony D680 580 VCT-580RM, VCT-680RM, VCT-50AV, VCT-60AV, VCT-80AV, VCT-R640, VPR1.
  • For Somita ST-3540 /666 3520 3560, for Velbon....
Check Stock

CUTTEREX 13\ Free 360° Vinyl Laminate Floor Cutter for VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor and Rigid Core Vinyl Plank

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" wide on VCT, LVT, PVC, LVP, WPC, Vinyl Plank Flooring, Max. 6mm Cutting Thickness, Adjustable Cutting Blade Height saves operator strength. Cutting Any Unapproved Flooring Materials will be Out of Warranty.
  • ✅OUTSTANDING VALUE: Dust free, Quick, Quiet and Easy Operation. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, NO Go Out and In House, NO Go Up and Down Staires, Time and Labor Saver..
  • ✅CUTS MMOST SHAPES ON FLOOR: Cuts at Free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut..
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Stop Fence and Angle Cutting Gauge..
  • ✅COMPACT DESIGN AND LIGHT WEIGHT: Easy to Carry and Move around..
Check Stock

CAME-TV Tripod Mounting Adapter Compatible with Sony VCT-U14 Quick Release Plate

  • 【Tripod Mounting】Comes with multiple 1/4"-20 and 3/8"-16 threaded holes on the bottom for mounting to tripod.
  • 【VCT-U14 Standard】The mounting adapter plate is compatible with Sony VCT-U14 standard, you can use with standard VCT-U14 camera rigs, such as CAME-TV EVA1 rig and URSA mini rig..
  • 【Quick Release Design】with a quick release lock on the side of the the plate..
Check Stock