Reviews Variable Speed Power

Yescom Variable Fan/Router Speed Controller 3 Settings Hydroponics Inline Fan Exhaust Air 500W to 1800W Adjuster

  • Fan/blower speed controller with 31 1/2" grounded power cord, applicable for fan or router which power is from 500w to 1800w.
  • UL listed power cord and plug for safe use.
  • One control switch for 3 settings: Variable Speed, OFF and Full Speed.
  • Speed control dial to control variable speed: Low, Medium or High speed.
  • With built-in grounded control outlet and metal clamp at the back.
  • Perfect for controlling speed of high velocity inline fan and mini blower.
  • Note: The Fan Speed Controller is NOT compatible with brushless type motors. Please only use it with FANS that have a universal brush type motor..
Check Stock

FIILPOW 20V 450CFM Leaf Blower, Brushless Blower Cordless with 4.0Ah Battery and Fast Charger, Turbo Mode & Variable Speed Trigger and Lock Dial, Lightweight Axial Blower for Lawn Care, Yard, Driveway

  • BRUSHLESS MOTOR - Provides 2X more torque and lasts 5X longer serves time compared to brushed motors, ensuring a more efficient and less noisy working.
  • TURBO BUTTON - Delivers 450 CFM maximum air volume and 120 MPH maximum air speed to clear wet leaves, stones, or other stubborn debris easier and faster.
  • 3 MODES - Features variable air speed and volume, Select LOW, HIGH or TURBO MODE via the speed dial and turbo button for different cleaning needs.
  • ERGONOMIC DESIGN - Rubber-covered handle provides smooth touching and holding feeling to promote user comfort.
  • Ergonomic button layout makes it easy to operate the variable speed dial and turbo button, full control of output power to tackle different cleaning works.
  • VARIABLE TRIGGER - Precise control of variable blower speeds allows you to gently clear away debris from delicate areas instead of confined to just all-out power.
  • LIGHT WEIGHT - 6.7 lbs (battery included) and balanced weight distribution delivers comfortable handling.
  • Easy one-handed holding, female/children use, and long time staying on the ladder.
  • LONG BATTERY LIFE - Up to 28 minutes runtime for low-speed mode, 15 minutes for high-speed mode, and 7 minutes for turbo mode via 4.0AH battery with the LED power display.
Check Stock

Makita 9566CV 6\ SJS™ High-Power Cut-Off/Angle Grinder

  • Powerful 13.0 AMP motor delivers more output and variable (4,000 - 10,000) RPM.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Makita 9566CV 6" SJS High-Power Cut-Off/Angle Grinder.
Check Stock

Makita HM1203C 20 lb. Demolition Hammer, accepts SDS-MAX bits

  • Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs.
  • Soft start suppresses start-up reaction for more precision and better accuracy.
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced.
  • L.E.D. power light indicates switch failure or cord damage.
  • Hard hitting (25.5J), with less weight (20.3).
  • Electronic Speed Control Automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs.
  • Soft Start Suppresses start-up reaction for more control and better accuracy.
  • Variable Speed variable speed control dial that enables user to match the speed to the application for greater versatility.
  • 12 bit angles settings - Bit can be set at 12 different positions for operating convenience..
Check Stock

Beleeb 20Amp Variable Transformer Auto AC Voltage Regulator Power Supply, 2000VA Max, 0~130 Volt Output

  • a variable AC input to a transformer input DC bridge rectifier to produce a variable output.
  • The adjustable voltage transformers does not convert AC to DC. It requires an AC input and the output is also AC. Also, the unit will not affect the cycle rate from the power company. If your power system is providing 60Hz, the Variac auto transformer will not change that, the ouput will be an undistorted 60Hz. This unit is rated up to 20 Amps or 2KVA Peak (16A Continous)..
  • Power: 2000VA,Input voltage: 110V, Input current: 18A, Output voltage: 0-130V, Rated output current: 15.38A (Continuous operation for 2 hours, 003c10A can work continuously.
  • This variable transformer is the perfect speed controller. The speed is infinitely variable, and because a transformer doesn't chop up the AC waveform like electronic speed controllers do, there's no noise, humming, etc..
  • If you're planning on using this as an "industrial" or bench-top supply with heavy loads, I'd recommend examining the brushes and adjusting the spring pressure on the windings. This can improve performance by reducing brush-contact sparking. Otherwise, this device is ready to work right out of the box..
Check Stock

JOD Router Fan Variable Speed Controller Control for Electric Motor Rheostat AC 120 Power from 500w to 1800w Adjuster

  • Fan speed controller applicable for fan or router which power is from 500w to 1800w, Electric Motor Rheostat AC 120 V/15 amps..
  • One control switch for 3 settings: Variable, Off, and Full.
  • Speed control dial to control variable speed: Low, Medium or High speed..
  • Multi-Fonction: Makes the fan speed control easy to adjust the speed of your inline fans and duct fans，don't use it on brushless type motors..
  • Package include : 1 x Variable Fan Speed Controller..
  • Note:Fan Speed Controller use with brush type motors only, Will not work with brushless type motor or soft/slow start motors,Use with centrifugal fans only..
Check Stock

WEN 4214 12-Inch Variable Speed Drill Press,Orange

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Worx WX102L 20V Power Share 1/2' Cordless Drill/Driver with Brushless Motor

  • [THE POWER TO OUTPERFORM] Worx Nitro tools are engineered to provide greater power, performance, and runtime.
  • [HEAVY-DUTY CHUCK] ½ in. ratcheting metal chuck for superior bit retention.
  • [BRUSHLESS MOTOR] Brushless motors are more efficient, run 50% longer, are 25% more powerful, and have 10% longer life.
  • [SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
  • [ALL-METAL GEARS] Dependable performance through the toughest jobs.
  • [2-SPEEDS] Variable 2-speed gearing and 20+1 clutch settings to adapt speed and torque for best results.
  • [VARIABLE SPEED] For easy starting and complete control of your drilling and driving.
  • [LIGHTWEIGHT DESIGN] For improved user experience and less fatigue.
  • [LED LIGHTING] Illumination of workspace and cutline in low light environments.
  • [GRIPZONE] Comfortable, ergonomic design with micro-texture for optimum comfort.
Check Stock

Jigsaw

  • LOW VIBRATION: State of the art counterbalancing mechanism is constructed to minimize blade deflection for true, exact cuts.
  • POWER: The JS572EK features a powerful motor with a 7.2 amp highest in class rating to easily handle heavy loads.
  • ONE TOUCH BLADE CHANGE SYSTEM: Fast blade insertion and ejection lever.
  • VARIABLE SPEED: The jig saw includes a variable speed dial to set max speed and an accelerator trigger to control operating.
  • PERFORMANCE: With Bosch’s Constant Response circuitry, the jig saw maintains consistent speed and performance under load.
Check Stock

Wood Drill Press Bores One Hole at Fast Speed

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock