Reviews Variable Hf Attenuator

SC Fiber Attenuator Male/Female Singlemode 20DB | SC/UPC Male to SC/UPC Female Fixed Single-Mode Attenuator | FiberCablesDirect | sc m/f sm attenuator 20Db

SC-SC UPC Male/Female fixed attenuator for singlemode applications to prevent over saturating an optical receiver when the optical power is too high. Using an attenuator ensures low bit error rates preventing damage to receiving fiber optic equipment..
Core / Cladding: 9/125µm - Singlemode attenuator has a 9 micron diameter fiber core and a 125 micron diameter cladding.
Mode Type: Singlemode 9/125um Attenuator.

20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.

Product 1: Large 1 inch HF1 gold sputtered capsule.
Product 1: Three position variable polar pattern: Omni, Cardioid & Figure 8.
Product 1: Three position variable high-pass filter: Flat, 40 Hz or 80 Hz.
Product 1: Three position variable pad: 0dB, -5dB or -10dB.
Product 2: Includes all assembly and mounting hardware | Branding/Logo on Product May Differ.
Product 2: Dual clamp mount attaches to mic stands or booms up to 1.25" diameter..
Product 2: Features a standard 3/8" microphone threaded mount and includes a 3/8" to 5/8" thread adapter.
Product 2: Measures about 17.3" x 15.4" x 5.5" when folded for storage.

Nested MTM (D’Appolito) design with dual woven composite drivers provides smooth on- and off-axis response with more dynamic output than conventional two-way studio monitor configurations..
MTM (D’Appolito) design minimizes phase displacement and leads to improved spatial resolution and a much wider sweet spot..
Dual 6.5-inch, custom-woven Kevlar LF/midrange drivers produce dynamic, size-defying bass output and detailed mids..
1.25-inch, silk-dome HF driver ensures smooth high-frequency performance that is never fatiguing to the ears..
Includes Studio One Prime and Studio Magic plug-in suite, over $1000 USD worth of music production software..
Unique design supports vertical and horizontal loudspeaker placement to fit into any mix environment..
Acoustic tuning controls help to compensate for room anomalies, providing a consistent frequency response customized for your mix environment..
Balanced XLR, balanced ¼-inch TRS, and unbalanced RCA inputs provide flexibility for seamless integration into any environment..
140W Class A/B bi-amplification for an open, clear sound..
Continuously variable HF and MF controls (-6 to +6 dB) help further fine-tune the sound for the space you’re in..

A wideband (30MHz-4000MHz), high-performance, general purpose LNA module with a built-in variable attenuator to maximize usability and portability.
The attenuation can be controlled either with the on-board potentiometer (analog control) or push button array (digital control).
Dual amplifier design with adjustable gain (20dB-50dB at 100MHz), low noise figure and low power consumption. Can be powered through bias tee....
Made in North America. Full 1 year warranty!.

...s: Inputs: (1) Stereo 1/8" , (2) Balanced 1/4" TRS, (2) Unbalanced RCA . Frequency Response: 80 Hz - 20 kHz. Crossover Frequency: 2. 8 kHz. Amplifier Power: 25W/Speaker. LF Driver: 3. 5" Kevlar. HF Driver: 1" Silk Dome. Peak SPL (@ 1 Meter): 100 dB. Input Impedance: 10k Ohms. Volume Range: A-Type Taper. MF Control: Variable (-6 to +6 dB, center 100 Hz). HF Control: Variable (-6 to +6 dB, center 10 kHz)..
Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height. Studio Monitor Stands (Pair). Adjustable Height. Steel Construction. Nylon clutch for adjusting. EVA Pad on top to eliminate unwanted vibrations. Triple enforced steel base with ultimate sturdiness. Black Color. Weight capacity: 80 lbs. . Adjustable height Range: 33-45 inches. Base: 17. 7 x 17. 7 x 17. 7 inches. Top Plate: 9. 05 x 9. 45 inches. Tube Diameter: 1. 5 inch- 1. 37 inch ..

..., we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience (sold separately, product ID B076CYK8XZ).
Your purchase includes a NESDR SMArt v5 RTL-SDR, a magnetic antenna base with a 2m (6.5′) RG-58 feed cable, and 3 different antenna masts for UHF and VHF operation, including a variable-frequency telescopic antenna.
Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty and product support through our support portal at https//support.nooelec.com.
Full datasheet available: https://www.nooelec.com/datasheets/100700.

【UL LISTED & LEVEL VI】▶ Each charger is optimized for energy efficiency (Level VI) and safety (UL Listed) and meets top industry standards such....
24V AC / DC Adapter for Philips SmartSleep Wake-up Light HF3520 HF3520/60 HF352060 HF3520/01 HF3520/97 HF3521/01 HF3510 HF3510/60 HF3510/01 HF3510/02....
Compatible with Philips HF3418 HF3418/60 EnergyLight Energy Light.
HF3419 HF3419/01 EnergyUp Light Energy Up HF24 Adapter 24Vdc 24W 24V 1A 1.5A 24.0V....
Compatible with Somneo SmartSleep HF3650 HF3651 HF3650/60 HF365060 HF3651/60 Sleep & Wake Up Light Smart Sleep Simulated Sunrise and Sunset, Multiple....
Input: 100-240V 50-60Hz. Output: DC 24V.【PACKAGE CONTENT】- 1 * US AC Adapter.

World Wide Input Voltage 100-240VAC 50/60Hz.OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
UpBright New Global 15V AC / DC Adapter Compatible with Philips Wake-up Light HF3500 HF3500/60 HF3505 HF3505/60 HF3506 HF3506/05 HF3506/06 HF3506/65....
Compatible with: Philips HF3506 HF3506/05 HF3506/06 HF3506/65 HF3506/66 Wake-Up Light.
Philips HF3500 HF3500/01 HF3500/60 Wake-up Light Alarm Clock....