Reviews Valve Oil
Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement
- The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
- The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
- The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check StockEngine Valve Cover with Gaskets, Bolts & Oil Filler Cap Compatible with 2011-2020 Chevy Cruze Sonic Trax Volt | Cadillac ELR | Buick Encore 1.4L Turbo Replace# 55573746 25198498 264-968 25198874
- ✅【 REPLACeMENT WITH FRONEZER VALVE COVER】 The valve cover seals the top of your cylinder head to keep debris out of the oil and prevent damage to the valves. Plastic valve covers can warp or crack from heat over time. Valve covers can also warp or bend if the bolts holding them down are over-tightened. If you notice that oil is leaking, your oil is often low, or you smell gas when your engine is running, our quality valve cover can perfectly resolve these problems..
- ✅【FITMENT】 Compatible with 2011-2015 Chevy Cruze 1.4L | 2012-2019 Chevy Sonic 1.4L | 2015-2019 Chevy Trax 1.4L | 2011-2015 Chevy Volt 1.4L | 2014-2016 Cadillac ELR 1.4L | 2013-2019 Buick Encore 1.4L.
- ✅【REPLACES PART NUMBERS】 264-968, SK510A05, 25198498, 25198874, 25198877, 25203036, 55573746.
- ✅【COMPLETE SOLUTION】This valve cover kit comes with 1 * new Valve Cover, 1 * new Oil Filler Cap , 1 * new Valve Cover Gasket and new Bolts. The pcv valve is pre-installed on the valve cover. This valve cover kit is a complete solution for your replacement..
- ✅【TWO YEARS WARRANTY】 This vavle cover kit has undergone a rigorous end-of-line testing for reliability So we offter TWO Years Warranty. If you're not 100% satisfied with our products, simply return it for a full ref....
Check StockValvoMax Quick Twist Oil Drain Valve – the Fastest, Easiest, Cleanest Way to Change Oil at Home – No Tools, No Mess, No Cleanup – for M12-1.75 - Stainless Drain Hose Attachment
- CHANGE YOUR OIL AT HOME IN 10 MINUTES OR LESS WITH NO MESS. The fastest, easiest, and cleanest way to change your oil at home with the ValvoMax Quick Twist Oil Drain Valve. Replaces your drain bolt. Find your vehicle using the Amazon Confirmed Fit search tool. Free returns, no oil leaks guaranteed, lifetime warranty, 100% satisfaction, made in USA, veteran owned..
- THE COMPLETE SOLUTION. Includes Quick Twist valve, steel cap with embedded rubber seal, drain tube assembly, and washer for installation. Eliminate the need for extra tools, no stripped or frozen drain plugs, avoid hot oil burns, and drain oil hot. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more!.
- PREMIUM BUILD. Features rugged Stainless-Steel construction that’s built to last, wave spring technology allows for FAST oil drain, premium VITON O-rings, safety cap with embedded rubber seal. Nothing comes close to the durability offered. Material you can TRUST! Designed with 3 redundancies in mind to eliminate any chance of leak..
- NO LEAKS GUARANTEED. The Quick Twist valve has 3 backup mechanisms to p....
Check StockMonoblock Hydraulic Directional Control Valve, 3 Spool, 11 GPM, SAE Ports
- Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3600 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
- Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
- Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
- Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
- Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check Stock6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)
- ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
- ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
- ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
- ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check StockGiardinelli Low Brass Care Kit
- Includes special formula oil, tuning slide grease, mouthpiece brush, valve casing brush, lacquer polish cloth, and coated snake.
- The Giuardinelli Low Brass Care Kit includes special formula oil, tuning slide grease, mouthpiece brush, valve casing brush, lacquer polish cloth, and coated snake.
Check StockKIMISS Trim Motor, Power Tilt Trim Motor 69J-43880-00 Replacement for Yamaha F200 F225 F250 LF200 200-250 H.P.
- Ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring - ecotech lnf valve spring tool.
- Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications - valve spring compressor tool.
- Features a reversible jaw adaptor and an automatic cam-action locking to a pre-determind setting.
- Allow valve springs and valve stem oil seals to be replaced with the cylinder head - valve spring compressor.
- Ideal for removing valve springs, spring retainers by compressing....
Check Stock6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine
- Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
- 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
- High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
- Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
- IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
- It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
- 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock3/4\ Brass Electric Solenoid Valve, 110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20
- High quality 3/4inch Brass Electric Solenoid Valve: Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. .
- Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
- 3/4" NPT port, Working temperature range: -5 ℃~80 ℃.
- Operating Pressure: MIN.0kg/cm - MAX.10kg/com .
- This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket. .
- Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
- This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check StockVEVOR Hydraulic Directional Control Valve, 6 Spool Hydraulic Spool Valve, 11 GPM Hydraulic Loader Valve, 4500 PSI Directional Control Valve, Hydraulic Valves and Controls for Tractors Loaders Tanks
- Hydraulic spool valve: Equipped with 6 spools and 1/2" BSPP type ring inlet/outlet ports. Maximum pressure of this hydraulic is 4500 PSI, and maximum flow can reach 11 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
- Double acting cylinders: Hydraulic control valve used to operate double-acting cylinders. All standard spools are spring-returned and can be reset to the neutral position. There are springs at the bottom of the handles that make the joysticks easy to control..
- Great inner valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
- Compact structure: 6 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
- Widely used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applica....
Check Stock