Reviews Valve Globe Fitting Pipe

Honeywell, Inc. M6435A1004 Spring Return Cartridge Globe Valve Actuator, Floating, SPDT

  • Inline globe valve with non-rising stem for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body for higher strength and corrosion resistance than brass.
  • Brass stem and disc for higher corrosion resistance than steel.
  • Female National Pipe Taper (NPT) threads for connecting to male threaded pipes.
  • 200 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Product contains brass which does not meet federal and state requirements for drinking water..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service.
  • ⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you ....
Check Stock

Hide A Hose Central Vacuum White Inlet Kit with 40 Foot Hose

  • Central Vacuum 2x2 Fitting adapts for 2" Schedule 40 Plumbing Pipe.
Check Stock

PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water

  • COMPLETE ICE MAKER WATER LINE KIT: Crosslinked high density polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections..
  • INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily without the hassle of shutting off the water. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water where you want it to go..
  • LEAD FREE COPPER CONSTRUCTION allows you to safely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole..
Check Stock

Johnson Controls VG7882ET Series VG7000 Bronze Globe Valve, Three-Way Mixing, Brass Trim, Union Sweat End Connection, 1/2\ Valve Size, 1.8 Cv

  • Elbow globe valve with rising stem and threaded bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body and disc for strength and corrosion resistance.
  • Pounds per square inch (gauge) (psig) rating of 200 for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Threaded bonnet for reduced risk of leakage.
  • Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes.
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

STYDDI Solid Brass Rain Barrel Spigot, Quarter Turn Ball Valve Faucet with Heavy-Duty Bulkhead Fitting Adapter for Aquariums, Water Tanks, Tubs, Pools

  • ... their valuable time to search for such a water spigot because here it is..
  • ALL SOLID BRASS CONSTRUCTION FOR DURABILITY - This is a heavy-duty brass quarter turn water spigot, specifically designed for rain barrels. The all brass construction including solid brass bulkhead fitting makes it a excellent pick for long-term use. Coming complete with water-proof washers and solid brass nuts, which is perfect for DIY rain barrels or replacement applications..
  • PACKAGE INCLUDED - This rain barrel spigot kit includes a 1-1/8 inch brass rain barrel quarter turn ball valve spigot and a 3.14 oz brass bulkhead fitting with 1-1/8 inch female thread. The thread of the water spigot input is 1/2" NPT Male, while the output thread is 3/4" GHT Male compatible for any garden hoses. It also comes with a seal tape and two water-proof washers..
  • TWO INSTALLATION METHODS AND TOOLS NEEDED - The brass bulkhead fitting can be front mounting or back mounting. When installing, a electric drill is needed for drilling a 1-1/16 to 1-1/8 inch diameter holes, and also need a pipe wrench or adjustable wrench. This kit suits for rain barrels whi....
Check Stock

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock