Reviews V Guide Bearing

GLAMGLOW ThirstyMud hydrating treatment 0.1 Ounce 4 Pack

  • Torque oz/in (60V/74V): 133 / 161 Torque kg/cm (60V/74V): 96 / 116.
  • Size in": 165 x 083 x 157 Size in Millimeters: 418 x 210 x 400.
Check Stock

Hitec 31225S HS-225BB Mighty Mini Ball Bearing Servo

  • Bearing Type: Top Ball Bearing Speed (48V/60V): 014 / 011 sec at 60 deg.
  • Torque oz/in (48V/60V): 54 / 67 Torque kg/cm (48V/60V): 39 / 48.
  • Size in": 127 x 066 x 122 Size in Millimeters: 3226 x 1676 x 3100.
Check Stock

Hitec 32645S HS-645MG High Torque 2BB Metal Gear Servo

  • Torque oz./in. (4.8V/6.0V): 107 / 133, Torque kg./cm. (4.8V/6.0V): 8.0 / 10.0.
  • Size in Inches: 1.59 x 0.77 x 1.48, Size in Millimeters: 40.39 x 19.56 x 37.59, Weight ounces: 1.94, Weight grams: 55.
Check Stock

Evike Airsoft – CYMA Sport Airsoft M4 Carbine w/ 10″ Keymod (Color: Black)

  • The Lancer Tactical Gen 3 is Lancer Tactical’s newest innovation. Majority of the internal parts will be similar to Lancer Tactical’s Proline series AEGs with a few new features and upgraded parts.
  • Lancer’s new Gen 3 uses a new built-in Zion Arms fully programmable electronic trig unit that can be programmed to shoot in varying burst modes..
  • Unlike the Gen 2, the Gen 3 are now equipped with a deans connector that helps with saving more space for higher capacity batteries.
  • The Gen 3s come out of the box shooting at around 380 – 400 FPS but we have also included a low FPS spring right in the box..
  • Reinforced metal Gen-2 gearbox with ultra smooth 8mm ball bearings, 18:1 steel gear set, steel teeth polycarbonate piston, bearing spring guide, rotary hop-up, 19,000 RPM high torque motor for consistent performance.
  • The Lancer Tactical Gen 3 now comes with a high speed 130 round mid capacity magazine that ensures proper feeding and helps prevents jams.
  • (Not included) Recommended 11.1V 600 mAH 20C PDW Stick or 11.1V1000 Dean.
Check Stock

Keller 1500 dovetail Jig with Whiteside Router Bits for mid size wood projects

  • INCLUDES: 1 precision 15'' long templates for both dovetails and pins (unlimited width capacity).
  • This special kit includes 1 Whiteside K33 dovetail bit (7 deg) with guide bearing, 1 straight Whiteside K43 bit with guide bearing (for stock 3/8'' to....
  • Works with unlimited lengths and widths of wood.
  • Also available (not included) is a smaller bit set that works with this same dovetail template for presentation cases, giftware and other small boxes.....
  • The template requires a simple easy to make wooden backing block, not included..
Check Stock

RIKON Power Tools 10-324 14\ Open Stand Bandsaw

  • Ball-Bearing Blade Guides - Upper and lower ball-bearing blade guides and thrust bearings reduce friction, increase blade life and contribute to the smooth operation of the machine during cuts.
  • Rack and Pinion Guide Post – Adjust the cutting depth easily with the turn of a knob. New inch scale helps set guide heights.
  • Extra Tall Rip Fence – Increased fence and re-saw bar heights of 6" give added support of lumber being ripped or re-sawn.
  • Rear 115V Power Outlet – Handy electrical outlet for plugging in lights, radios, phone chargers and more.
  • Takes 111” Blades – Band saw accepts all styles of 111” long blades from 3/16” to 3/4” in width.
Check Stock

CHUANGNENG 2Set SBR20 1500mm Fully Supported Linear Rail Shaft Rod with 4 SBR20UU Block Bearing,for Automated Machines DIY CNC Routers Lathes Mills

  • 【COMPLETE LINEAR RAIL KITS】- This linear rail set includes 2 pieces of 1500 mm long rail shafts and 4 SBR20UU blocks. Sliding blocks to be used cooperatively with rails, smooth sliding provided by the inside linear bearing..
  • 【HIGH-QUALITY STEEL MATERIAL】- CNC parts linear rails are made of carbon steel, linear Bearings made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
  • 【PREMIER LINEAR GUIDING SYSTEM】- Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
  • 【EASY TO INSTALL】- Aluminum alloy support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance..
  • 【WIDE APPLICATION】- The linear guide rail is widely used in the automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock

Corsair LL Series LL140 RGB 140mm Dual Light Loop RGB LED PWM Fan, No Controller-Single Pack

  • 16 independent RGB LEDs in every fan, split between two separate light loops..
  • This Product is intended as an expansion of the Ll140 RGB LED 2 fan kit with lighting Node Pro. The RGB functionality of this Product requires a RGB lighting hub and lighting Node Pro..
  • PWM fan control allows for dynamic speed adjustment between 600 rpm to 1, 300 rpm, minimizing noise or maximizing airflow..
  • 140mm fan Blade engineered for Low-Noise operation without sacrificing performance. NOTE: Refer the User Guide before use..
  • Fan size is 5.51 x 0.98 in inches. Bearing type is hydraulic.
  • Air Flow Rate: 51.5 CFM. Operating Voltage: 7V – 13.2V. Speed: 600 – 1300 RPM.
Check Stock

Mssoomm 15mm HGH15 CNC Square Linear Guide Rail Kit 2Pcs HGH15-25.2 inch / 640mm +4Pcs HGH15 - CA Square Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGH15 linear guide rail set includes 2Pcs HGH HGR15-640mm（25.2 inch）linear guide rail and 4Pcs HGH15CA square type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGW 15 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGH-HA, HGW-CA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you can use s....
Check Stock

Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGW25 linear guide rail set includes 2Pcs HGW HGR25-2950mm（116.14 inch）linear guide rail and 4Pcs HGW25CA flange type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGH 25 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you....
Check Stock