Reviews Uv resistant Regulator

5 FT Propane Adapter Hose with Regulator,1 lb to 20 lb Converter Gas Regulator fit for POL Tank,Blackstone 17 ,22 Tabletop Griddles,Pit boss 2 Burner Table top Gas Griddles 1 Year Warranty

  • ★【5 FT Propane Adapter Hose with Regulator】:1*5FT POL hose, 1 * regulator,CSA certification,The 5FT POL adapter is a universal propane tank....
  • ★【Multiple Ways to Connect】:5 FT propane adapter hose with regulator is suitable for blackstone 17”, 22” tabletop griddles,pit boss griddle,....
  • ★【Scope of application】: 5 FT propane adapter hose with regulator is suitable for blackstone 17”, 22” tabletop griddles,camping stove series....
  • ★【High Quality And Durable】:Aluminum alloy regulator and high-quality rubber propane hose have good corrosion resistance and wear resistance. In....
  • ★【Perfect after-sales】:5 FT propane adapter hose with regulator provides a warranty for 1 year.If there is any problem within 365 days after....
Check Stock

3 FT Propane Adapter Hose with Gas Grill Regulator fit for Blackstone 17” 22” Tabletop,and The Dash Griddles- QCC1 / Type1 Connects for 1 lb to 20 lb Propane Tank,2 Year Warranty

  • ★【3 FT Propane Adapter Hose with Regulator】:1*3FT QCC1 hose, 1 * regulator,CSA certification, keep your outdoor cooking utensils in the best....
  • ★【Multiple Ways to Connect】:3 FT propane adapter hose with regulator is suitable for blackstone 17”, 22” tabletop griddles,pit boss griddle,....
  • ★【Scope of application】: 3 FT propane adapter hose with regulator is suitable for blackstone 17”, 22” tabletop griddles,camping stove series....
  • ★【High Quality And Durable】:Aluminum alloy regulator and high-quality rubber propane hose have good corrosion resistance and wear resistance. In....
  • ★【Perfect after-sales】:3 FT propane adapter hose with regulator provides a warranty for 1 year.If there is any problem within 365 days after....
Check Stock

RVMATE 30 Amp to 50 Amp RV Adapter Cord 12\

  • For connecting your 50amp rv plug to the 30amp power supply. TT-30P male to 14-50R female, 10 AWG. it's not a voltage/current regulator and for Temporary Use Only!.
  • 180 degree free bend, easy to connect with extension cord..
  • Power adapter features a right-angle male connector to provide a reliable low-damage and low-bend interface with your power source..
  • 90-degree plug with bigger space for handles allows you to plug in your power cord with ease..
  • LED power indicator will light up when cord is connected to power supply. Made of UV-resistant material..
Check Stock

wonofa Water Flow Generator Turbine Generator Hydroelectric Micro Hydro Generator 1/2 Inch Portable Water Charger 10W 12V

  • Micro hydro generator, the potential energy conversion of the water into electrical energy mechanical equipment.
  • High UV and water resistance for a long life,the life of generator:more than 3000h.
  • Appearance: generator surface cleaning, no corrosion, the structure is strong.
  • Output characteristics: the output voltage with no voltage regulator is proportional to the water pressure.
Check Stock

Le Lematec Air Regulator. 1/4' NPT Diaphragm Type In Line Paint Gun Pressure Regulator for Air Compressors. (AR-02)

  • The AR-02 Air Regulator is a true Diaphragm type which delivers your desired and precise air flow from your compressor to all air tools. 0-140 PSI, 1/4" NPT.
  • Great as a Paint Gun Regulator with its' Large Glass Display making it resistant to shop liquids and super easy to read..
  • The Air Pressure Regulator Valve comfortably fits in your hand for quick pressure adjustments so you can focus on the job..
  • The Le Lematec Inline Air Regulator Features Impact Resistant housing to withstand drops, bangs, & accidents..
  • Unlike other Paint Gun Regulators, ours features a lightweight and ergonomic design for installation between your air compressor and air tools allowing for little if any interruption to your air system..
Check Stock

TeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)

  • Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
  • Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
  • Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
  • Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
  • Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..
Check Stock

10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat

  • 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled..
  • 10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors..
  • 10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input..
  • Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"....
Check Stock

Droll Yankees Squirrel Proof Bird Feeder Pole Cardinal Bird Feeders Jagunda 7.5 Feet Auger Anchor Clear JGA

  • Squirrel proof, pole mounted platform, hopper style feeder great for cardinals.
  • Threaded adapter allows an additional feeder to be mounted on top.
  • UV stabilized polycarbonate, won't yellow with age, dependably durable.
  • Rust resistant pole now includes the ultimate pole auger with lever extension arms for extra easy installation in all soil types.
  • Sturdy 7.5 feet long, 1-inches outside diameter.
  • rotating port regulator adjusts seed flow for any type seed, reduces waste.
Check Stock

Hromee 1/4 Inch Air Compressor Filter Regulator Combo Water Oil Separator with Pressure Gauge Manual Drain Ball Valve and Bracket AW2000-02

  • BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic....
  • PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired....
  • GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two....
  • EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It....
  • PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained.....
Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock