Reviews Utility Faucet Wall Mount

KWODE Commercial Wall Mount Faucet Installation Kit, Wall Mount Kitchen Faucet Mount Kit Backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

  • Commercial Faucet Installation Kit:This faucet installation kit connected size is G1/2 male(also called 1/2 IPS), not 1/2” NPT, fitting wall commerical faucets with G1/2 female end..
  • LEAK-PROOF DESIGN: It is one-piece construction for no leaking, plastic washers and rubber washers are used together for better leak-proof effect..
  • EASY TO INSTAL :Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of stainless steel sink by lock nuts to secure faucet.(tips please use the water tape to avoid leakage).
  • INSTALLATION KIT FOR BACKSLASH MOUNT FAUCET:This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of stainless steel commercial kitchen prep & utility sink, which can save you space and increase the service life of the water supply line..
  • SOLD IN PAIR: Comes with 90 degree angled elbow joint x 2, lock nut x 2, stainless steel washer x 2 and rubber washer x 2..
Check Stock

KWODE 2-Handle Commercial Sink Faucet 8 inch Center Wall Mount Kitchen Faucet with 8\ Swivel Spout for Home Restaurant Kitchens Brass Constructed Chrome Finish

  • ...Max 2.2 GPM water Flow. Lead free brass constructed with superior rust resistant chrome polished finish resist corrosion and tarnishing against every use..
  • ❤Wall Mounted Faucet: 8-inch center commercial faucet with 8 inch swivel swing spout nozzle easy to be compared with your ceramic/acrylic/crystal stone or prep utility sinks. Chrome Plated copper to make it clean and 360°rotated 8” add on spout by hand..
  • ❤Backsplash Mount Installation Faucet: 2-hole wall mounted installation, easy to install, just 10 minutes finish without plumber need. Just tighten up the nut and connect the water supply that is enough.(Attention: Please make sure each gasket in each female thread before installation).
  • ❤Reliable Quality Products: 5 years replacement warranty for our commercial faucet. Any issue, please contact us from your order, we promise we will reply and fix your concerns in 24 hours.( tips: the 90°Angle installation kit is not included, if you need, please search “B08BFDH6WZ”).
Check Stock

Installation kit for Wall Mount Commercial Faucet,backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

  • 【INSTALLATION KIT FOR BACKSLASH MOUNT】This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.
  • 【1/2 IPS STRAIGHT THERAD】it is NOT 1/2 NPT,it's 1/2 IPS which is also called G1/2,fitting wall commerical faucets with G1/2 female end.
  • 【LEAK FREE】its one-piece construction for no leaking.
  • 【EASY TO INSTAL】Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet.
  • 【SOLD IN PAIR】comes with 90 degree angled elbow joint x 2,lock nut x 2,plastic washer x 2 and rubber washer x 2.
Check Stock

Airuida Chrome Polish Wall Mount Kitchen Sink Faucet 8 Inch Center Double Cross Handles Chrome Polish Mounted Installation Kit for Wall Mount Faucets Connector Set

  • [Material]:Manufactured from solid brass with Lead-Free Waterway for sturdy and heavy-duty.strong tarnish and corrosion resistance.It will not leak..
  • [Design]:The spray head designs with 360-degree twist which rinses to every corner of the sink.Powerful spray perfects to flush the food debris easily..
  • [Function]:This elbow adapter with 1/2 NPT female ends is designed to install a wall mount commercial faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.
  • [Install]:Connect the longer end to the back of wall mount faucet,the shorter end to water line,against washes at the back of Stainless Steel sink by lock nuts to secure faucet. Fit better for various faucets.Designed for simple installation. Allows installation of wall mount.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

KWODE Commercial Faucets with Pre-Rinse Sprayer 8 inch Center Wall Mount Kitchen Sink Faucet for Restaurant Industrial 3 Bay Compartment Kitchen Sinks 35” Height 12” Add-on Swivel Spout Double Handle

  • ❤Commercial Faucet 8 Inch Center: 8 Inch adjustable (7.95-8.34”) hole center wall mount commercial faucet is designed for 2 or 3 bowls prep & utility compartment sink at home restaurant industrial kitchens, especially loved by restaurant cooker working with wall mount faucet together. (About the adjustable hole center contact us for video, if you need).
  • ❤Commercial Kitchen Faucet Spare Parts Sold Separated: You can easy to get that G1/2 installation kit, different flexible hose, commercial sink sprayer, 6” 8” 10” 12” 14” spout replacement parts, pre-rinse hose with sprayer valve, even the swivel aerator etc you can search “ KWODE Faucet” to get it..
  • ❤Commercial Sink Faucet:with sprayer heavy duty lead free brass constructed, chrome polished finish. 12 inch swivel spout and 1.42 GPM black pre-rinse sprayer, 38 inch flexible hose is a good ideal for 3 bay compartment sink. 360 degree rotation spout by your hand with 2.2 GPM, easy to control.
  • ❤Wall Mounted Installation Faucet: Easy to install with 8 inch adjustable center hole, all the parts are included, just follow the manual.the 12” wall bracket can be cut-able, No plumber needed.( tips:please keep all the gasket inside the female connected, no need water tape. Purchasing ....
Check Stock

Airuida Wall Mounted Faucet Kitchen Chrome Polish 6 Inch(15cm) Spout Wall Mount Faucets Connector Set Stainless Steel Commercial Kitchen

  • [Material]: Refined brass material construction, advance chrome polish finish resist corrosion and tarnishing, anti-rust..
  • Function:This elbow adapter with 1/2 NPT male ends is designed to install a wall mount commercial faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.
  • [Function]: Double handle wall mount kitchen sink faucet can easy control cold and hot water.The spout can rotate 360 degrees.
  • Design:Low Lead Compliant High Quality Brass Material.One-piece construction prevents if from leaking.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

Airuida Wall Mounted Faucet Kitchen Brushed Nickel 6 Inch(15cm) Spout Wall Mount Faucets Connector Set Stainless Steel Commercial Kitchen

  • [Material]: Refined brass material construction, advance brushed nickel finish resist corrosion and tarnishing, anti-rust..
  • Function:This elbow adapter with 1/2 NPT male ends is designed to install a wall mount commercial faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.
  • [Function]: Double handle wall mount kitchen sink faucet can easy control cold and hot water.The spout can rotate 360 degrees.
  • Design:Low Lead Compliant High Quality Brass Material.One-piece construction prevents if from leaking.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

KWODE 8” Swivel Swing Nozzle Spout Replacement Kit for All Brand Commercial Kitchen Sink Faucet with M25*1.25mm Connector Size and 2.2 GPM Aerator, 360°Stainless Steel Add-on Spout Chrome Finish

  • ✅Commercial Faucet Spout Replacement: This 8 inch swivel spout is designed for wall mount or deck mount commercial faucet with M25*1.25mm connector size, 8" add on spout is designed for 1 or 2 compartment, please pay attention).
  • ✅8 inch Swivel Swing Nozzle Spout: 8 inch spout reach and 5.5 inch spout height, 2.2GPM Max water Flow, good design for wall mount or deck mount faucet even commercial pre-rinse faucet working on 1 or 2 prep & utility compartment sinks..
  • ✅360°Short Add-on Spout: lead free stainless steel constructed, polished chrome surface with high hardness and heat resistance characteristics. You can rotated the spout 360 degree by hand, easy to control and use..
  • ✅ Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.).
  • ✅ Reliable Quality Spout: Just 8 inch faucet spout only, no included commercial faucet, 12 months warranty for this swivel spout, any issue, please contact us from your order directly (the spout is good for KWODE, JZ,IM,MS commercial faucet, please make sure the connector size is M25*1.25MM, before you making the order.).
Check Stock

Havin Brass Pot Filler,Wall Mount Commercial Pot Filler Faucet,Brass Copper Material Kitchen Folding Faucet,Coffee Machine Faucet with Stretchable Double Joint Swing Arms (Style A, Brushed Nickel)

  • ► Pot Filler Faucet:100% High Quality Brass Material,Ensures Durability and Easy Cleaning..
  • ►More Safe Leak Free Design:Dual Handles pot filler with Two ceramic valves provide smooth turning action and prevent dripping.
  • with 1pc spare valve for future replacement..
  • ►This Pot Filler Faucet arms can be 360° Rotation：Dual Jointed Swing Spout,Use for Only Cold Water or Only Hot Water,One Hole Inlet Wall Mount..
  • ►High Water Flow Rate: 4 gpm @ 60 psi, 15 L/min @ 414 kPa,Fill the large pots or pans quickly.
  • NPT 1/2" or 1/2" NPSM connecting thread,Fit for US Standard,with a installation flange for stability..
  • ►This folding faucet also can use for coffee machine or laudry faucet & Utility faucet.(wall mount style).
Check Stock

TNROTED 8 Inch Faucet Swivel Spout Replacement Kit for Commercial Kitchen Sink Faucet, 360° Commercial Faucet Swivel Spout with 2.2 GPM Aerator, Chrome Finish

  • Commercial Faucet Spout Replacement Kit: 8 inch faucet spout reach and 5.5 inch spout height, Swing spout connector size is M25*1.25mm female thread. This 8 inch swivel spout is designed for wall-mounted or deck mount commercial faucets. (please make sure your faucet connector size before you making the order).
  • 8 Inch Swivel Add On Spout: This 12” add-on spout is ideal for 1 or 2 bowls stainless steel prep & utility compartment sinks at home, restaurant and industrial kitchens, good design for wall mount or deck mount faucet..
  • 360° Swivel Faucet Spout: 10 inch swing spout can be rotated 360 degrees by hand, easy to control and use.
  • lead free stainless steel constructed, easy to clean、 durable and sturdy..
  • Easy to Install: 2.2 GPM max water flow. just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gaskets are already keeping in the connector place, just connect it and no water tape.).
  • Guarantee: Amazon provides a 30-day free refund and 12 months replacement warranty. If you have any questions, please contact us from your order directly, we guarantee that we will answer and solve your problem within 24 hours..
Check Stock