Reviews Used Car Hoists

Kayak Hoist Set – Overhead Pulley System with 125 lb Capacity for Kayaks, Canoes, Bikes, or Ladder Storage by Rad Sportz (2 Pack)

• SET OF 2 CEILING HOISTS – The set of 2 storage hoists are ideal for keeping your kayaks, canoes, bikes, or ladders suspended overhead for convenient out of the way storage in your garage or shed.
• PULLEY SYSTEM – The hoists utilize a pulley system with a safety locking mechanism that makes it easy to lift and safely store equipment up to 125-pounds.
• RUBBER COATED HOOKS – The hooks are designed with a rubber coating to protect your kayak or canoe from scratches.
• EASY INSTALLATION – The pulleys can be used on ceilings up to 12 feet. Please note, you can mount this item as pictured on a 2 X 4 and screw the 2 X 4 to the joist or mount it right to the joist itself.
• PRODUCT DETAILS – 125 weight capacity per hoist. Set of 2.

SPECSTAR 1100 Lbs Engine Support Bar Transverse Hoist for Motor Transmission with 2 Points Lift Holder and Dual Hooks

• ...is transverse bar can carry up to 1100 lbs. that is suitable for lifting up and down of almost all types of car engines including sports cars, SUVs, sedans, and so on.
• It can precisely locate and support the engine, making repair and clean become easier.
• ACCURATE FINE-TUNING HEIGHT - The lifting height of 2 rotating hoists on the engine holder bar can be adjusted from 0 to 7.9 inches, and it is available to maintain altitude for a long time.
• Equipped with a knob and stable triangular base on each side, the range between the 2 bases can also be changed from 21 to 59.1 inches, so it applies to vehicles that width is less than 59.1 inch.
• PREMIUM FEATURES - The overall dimension of this solid engine brace is 59.1” (L) x 8.7” (W) x 7.9” (H).
• It comes with double strong iron chains that ensure the safe landing of the motor, which is handy for doing engine mounting.
• The non-slip thickened rubber feet on the bottom of the triangular base can effectively reduce noise when moving and prevent scratches on the car.
• EASY TO OPERATE - First, place black triangle support bases in the appropriate position, then fasten the engine with iron chains, and turn rotating hoists to raise or lower the motor to the proper height based on your needs.

SuperHandy Manual Chain Block Hoist Come Along 1 Ton 2200Lbs Capacity 10 Foot Lift 2 Heavy Duty Hooks Industrial Grade Steel Construction Building Garages Warehouse Automotive Machinery

• SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 10 Feet, Head Room of 12" inch and Load Chain Diameter of 6mm at a MAX weight capacity of 1 TON 2200LBS (1000Kg) of working load capacity.
• RESILIENT - Heavy duty 20MN2 Alloy Steel Chain and milled steel gears are black oxide finished, heat-treated cold rolled forged.
• Precision machined load sheave chain pockets using Roller Bearings and Friction Discs for smooth operation and increased efficiency.
• QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.16 and ASME HST-2 standards.
• Our compact design requires low headroom.
• Our hoists use load sharing gears, making heavy loads easy.
• SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
• Do NOT use our hoists for non-recommended applications.
• The ergonomic rubber hand grip provides better comfort and security.
• BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
• Included is a handy storage bag and shoulder strap for easy carry.

SuperHandy Manual Chain Block Hoist Come Along 1/2 Ton 1100Lbs Capacity 10 Foot Lift 2 Heavy Duty Hooks Industrial Grade Steel Construction Building Garages Warehouse Automotive Machinery

• SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 10 Feet, Head Room of 11" inch and Load Chain Diameter of 5mm at a MAX weight capacity of 1/2 TON 1100LBS (500Kg) of working load capacity.
• RESILIENT - Heavy duty 20MN2 Alloy Steel Chain and milled steel gears are black oxide finished, heat-treated cold rolled forged.
• Precision machined load sheave chain pockets using Roller Bearings and Friction Discs for smooth operation and increased efficiency.
• QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.16 and ASME HST-2 standards.
• Our compact design requires low headroom.
• Our hoists use load sharing gears, making heavy loads easy.
• SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
• Do NOT use our hoists for non-recommended applications.
• The ergonomic rubber hand grip provides better comfort and security.
• BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
• Included is a handy storage bag and shoulder strap for easy carry.

SuperHandy Manual Chain Hoist Come Along 1/2 Ton 1100Lbs Capacity 5' Foot Lift 2 Heavy Duty Hooks Commercial Grade Steel Construction Building Garages Warehouse Automotive Machinery

• SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 5 Feet, Head Room of 10" inch and Load Chain Diameter of 4.3mm at a MAX weight capacity of 1/2 TON 1100LBS (500Kg) of working load capacity.
• RESILIENT - The heavy duty 20MN2 Alloy Steel Chain and milled steel gears are premium black oxide finished, heat-treated forged, cold rolled forged steel hoist body for great durability.
• Utilizing a Dual Pawl Brake System, (2) Ductile Drop-Forged Safety Stamped Latches.
• QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.21 and ASME HST-3 standards.
• Our compact design requires low headroom.
• Our hoists use load sharing gears, making heavy loads easy.
• SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
• Do NOT use our hoists for non-recommended applications.
• The ergonomic rubber hand grip provides better comfort and security.
• BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
• Included is a handy storage bag and shoulder strap for easy carry.

1/2 TON 10'Lift AIR Chain Hoist

Festoon Lead Car, Small Round Cable

• Festoon cable is designed for the continuous power & control of overhead cranes, hoists and other types of lifting & handling equipment.
• UL Listed and CSA Approved - Yellow, PVC Jacket, -40ºC to 105ºC, Indoor/Outdoor Applications.
• Refer to Product Downloads for detailed specs including cable dimensions and Amp ratings.
• We supply complete festoon systems: I-Beam, C-track, Wire-Rope and most other parts for Overhead Cranes & Hoists.
• Contact [email protected] for more information.

Lyon Workspace - DD67243GW - 60 x 36 x 120 14 ga. Steel Bulk Storage Rack Add-On Unit, Gray; Number of Shelves: 4

Genmitsu CNC 3018-PRO Router Kit Milling Engraving Machine + GS-775M 20000RPM 775 CNC Spindle Motor with ER11 Collet Set

• What You Get: Genmitsu 3018-PRO CNC router kit.
• 1pcs CNC Spindle Motor with ER11 Collet. (Note: They will be shipped separately).
• Premium Power Adapter: The 3018-PRO has brought safety improvements to the adapter, with CE/FCC/UL-approved. Strong built for heavy-duty and long usage performance, making input/output stably even when work for a long time or work with a laser module..
• Offline Controller: The 3018-PRO comes with an offline controller, you can manually adjust X, Y, Z-axis without connecting to the computer and download files..
• Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials. Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise..
• Speed: 20000/min. Pre-installed motor noise suppression PCB provides enhanced performance. It's compatible with Genmitsu 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc..

Genmitsu GS-775M Micro DC 24V 20000RPM 775 Motor, Double Ball Bearing, High Power, Noise Suppression, DC Motor Driver for Electrical Tools DIY

• Double ball bearing brush. CW/CCW rotation..
• Pure copper wire, low heat, long life, low loss..
• Pre-installed motor noise suppression PCB provides enhanced performance..
• It's widely applied to electric tools, electric fans, electric cleaners, lathes, mills, car hoists, pumps & conveyors, etc..