Reviews Usb Serial Communication

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.

Double shielding layer: This rs232 to usb has a thick tinned copper core, aluminum foil, metal braided mesh shielding layer, multi-layer shielding to isolate interference, which can make it smooth and not stuck when used. In addition, its baud rate supports 20bps to 256kbps, and serial communication data can be transmitted quickly..
Powerful chip: This rs232 to usb is equipped with PL2303 professional chip, which can transmit signals at a high speed and stably, protecting your data safely and without loss..

USB to Null Modem (Cross-Wired) RS232 Serial Adapter.ftdi usb serial null moldem DCE adapter cable for upgrading the old version desktop DB9 - DB9 cross wired null modem cable.
usb rs232 to db9 female adapter cable,Add a Null Modem RS232 serial port to your laptop or desktop computer through USB.
This cable is mostly specially used in PC(host) - PC(host) communication, also called null modem cable.
This cable also can be used for PC control the TV, smart TV(as nowadays the TV is a computer).
Length: 6ft Up to 921.6M RS232 transfering speed..

CP2102+ZT232 usb serial null moldem DCE adapter cable for upgrading the old version desktop DB9 - DB9 cross wired null modem cable.
usb rs232 to db9 female adapter cable,CP2102+ZT232 chip..
This cable is mostly specially used in PC(host) - PC(host) communication, also called null modem cable.
Add a Null Modem RS232 serial port to your laptop or desktop computer through USB.This cable also can be used for PC control the TV, smart TV(as nowadays the TV is a computer).
Null modem PINOUT: DB9#2-TX(yellw), 3-RX(orang), 5-GND(blk), 7-CTS(green), 8-RTS(brown).

The KEYESTUDIO Plus board can work like the Arduino Board but it is more powerful and has more pins.
The USB to Serial chip of this board is stable and compatible CP2102.
extend serial communication and I2C interface, 6 PWM and 6 analog ports.
special DC-DC design provides up to 5V 1.5A, can drive high-current devices like servo and motor.
The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
How to use: Search for "keyestudio wiki KS0486" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.

【No soldering needed】 This is SO convenient， convenient wiring. The shell is designed with folding buckle, It can be disassembled or assembled....
【DIY DB9 cable 】Using 9pin male and female connectors, you can make DB9 cable or USB to RS232 / RS485 cable by yourself. The cable length and....
【Functional features】suitable for all kinds of industrial control products that need serial communication for pin connection, all copper base,....
【Scope of application】D-sub9pin does not need to weld serial port connector, which is suitable for RS232 / RS485 / RS422 serial adapter COM port....
What you get :(1PCS Female +1PCS Male )with case，1PCS Screwdrivers ，4PCS 4#5+7 Serial port Nut ，4PCS 4#62mm Serial port long bolt ，4PCS 3*8mm....

Particularly design this keyestudio sensor expansion board V2 for micro:bit. breaks out all the PIO ports on the micro:bit control board into 3PIN interface (GND, VCC, Signal), easy to connect it with other sensor modules..
Extending some commonly-used serial communication interfaces into pin or female headers with 2.54mm pin pitch, such as I2C and SPI communication pins.Allows communication between micro:bit control board and other communication devices..
Two kinds method to power the micro:bit board, through a black DC jack (DC 7-9V) or a mciro USB port (DC 5V) on the shield..
Connection Diagram, Sample Code, Using Method and Resources are provided in our wiki page. Technical support is available via email or message..
Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..

Add 16 RS232 serial ports (DB9) to your low or full-profile computer through a PCI Express slot.
This 16-Port PCI Express Serial Card provides high-speed PCIe serial card with 16 DB9 RS232 ports from a single PCIe slot.
Multiport serial adapter card enables high-speed serial communication with data transfer rate up to 921.6 Kbps.
Compliant with PCI Express 1.0a/1.1 and compatible with 1x/2x/4x/ 8x/16x PCIe bus.
PCIe serial card / Multiport serial adapter card / Serial PCIe card / Serial expansion card / 16 port serial card / pci serial port / pcie serial card / PCI serial card / pci e serial card / pci express serial card.

MEETS INDUSTRY STANDARDS: The 2-port PCI express serial card is compliant with PCI Express 1.0a specification, and it's compatible with 1x, 2x, 4x, 8x and 16x PCI Express slots..
MAXIMUM COMPATIBILITY: The dual port DB9 to PCIe adapter is ideal for system upgrades in a wide range of applications including manufacturing equipment, POS equipment, and security devices..
HIGH-PERFORMANCE COMMUNICATION: The low-profile serial card delivers high-performance serial communication, with support for data transfer rates of up to 460Kbps..
SIMPLE INSTALLATION: The PCI dual serial adapter features IRQ sharing and supports plug-and-play connection. It has a standard-profile bracket installed, and an optional low-profile bracket..

The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
CAN industrial automation control system.
The serial communication device is connected to CAN-bus.