Reviews Universal Tailpipe Converters

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • 【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
  • 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

A-KARCK Exhaust Tip 2.5 Inch Inlet, Muffler Tip 2.5' Inlet 4' Outlet 5' Long Dual Wall For Car Tailpipe, Stainless Steel Polished Weld On

  • 【Dimension】2.5 inch inlet diameter, 4 inch outlet diameter, 5 inch overall length, Universal fits 2.5 inch outer diameter tailpipe..
  • 【Material】Made of 304 stainless steel to avoid corrosion and deformation of the existing tailpipe..
  • 【Unique Design】Exquisite workmanship, bright as a mirror after repeated polish processing..
  • 【Appearance】Its exquisite appearance makes it the best choice for decorative vehicles..
  • 【Installation】The method of welding the exhaust tip can ensure long-term use and safety..
Check Stock

Upower 4' to 7' Diesel Exhaust Tips 4' inlet 7' outlet 18' Long Universal Exhaust Tips Mirror Polish Stainless Steel Exhaust Tailpipe Rolled Edge Bolt On Diesel Tips

  • 【Design】Bolt On - Rolled Edge - 70 Degree Single Angle Cut..
  • 【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation..
  • 【Wide Application】Universal fits 4" INLET diesel trucks pickup car exhaust tailpipe system..
  • 【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
Check Stock

A-KARCK Exhaust Tip 3 Inch Inlet, 3' Inlet 5' Outlet 12' Long Black Coated Finish Muffler Tip for Truck Tailpipe, Stainless Steel Rolled Edge

  • Dimension: 3 inch inlet diameter, 5 inch outlet diameter, 12 inch overall length, Universal fits 3 inch outer diameter tailpipe..
  • Material: Made of stainless steel to avoid corrosion and deformation of the existing tailpipe. Black coating prevents rain erosion..
  • Appearance: The pure and elegant black exterior can perfectly decorate your vehicle..
  • Installation: Bolt on design for easy installation. Makes it possible to remove the exhaust tip for cleaning..
  • Unique Design: Bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust..
Check Stock

Exhaust Tip 3" Inlet Dual Wall, A-KARCK Double Wall Tailpipe Tip 3" Inlet 4" Outlet 5" Overall Length Weld On Decorate Car Tailpipe

  • 3" ID EXHAUST TIP: 3" inlet diameter 4" outlet diameter 5" overall length, universal fits for 3" outer diameter tailpipe..
  • MATERIAL: Made of 304 stainless steel to avoid corrosion and deformation of the existing tailpipe.
  • UNIQUE DESIGN: Exquisite workmanship, bright as a mirror after repeated polish processing..
  • APPEARANCE: The exquisite appearance makes it the nice choice for decorative vehicles..
  • INSTALLATION: The method of welding the exhaust tip can ensure long-term use and safety..
Check Stock

Upower 4' to 8' Exhaust Tip Mirror Polished 4 Inch Inlet 8 Inch Outlet Diesel Exhaust Tailpipe 18' Long 45 Degree Angle Cut Bolt-On Universal for Trucks Pickup Car

  • 【Design】Bolt On - Rolled Edge - 45 Degree Single Angle Cut..
  • 【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation..
  • 【Wide Application】Universal fits 4" INLET diesel trucks pickup car exhaust tailpipe system..
  • 【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
Check Stock

Stainless Steel Car Exhaust Tip, 5.5″ Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Blue/Bend)

  • ...ng the screw connection method, loosen the screw on the tailpipe, put the tailpipe in a suitable position at the end of the exhaust pipe of the car, and then tighten the screw with a wrench. It’s just need five minutes for you to finish the installation. If you have problem of installation, please let us know..
  • 【Universal Fit】: The length of this exhaust pipe is 5.5″, this universal tail throat is suitable for the exhaust pipe on the market within 2.0″~1.5″ diameter. It fits most models and can be selected according to the exhaust pipe of the vehicle, if it is straight, you can choose the straight one. If it is oblique outlet, you can choose the oblique one..
Check Stock

Cord Magic: The Ultimate Guide to Knot Magic and Spellcrafting with Fiber for Beginners (Magic Spells)

  • Mini Converter Optical Fiber automatically switches between any SD, HD, 3Gb/s HD-SDI video standards and each direction can be completely independent..
  • Mini Converters support embedded SDI and HDMI audio and several models let you separately embed or de-embed analog or digital audio..
  • Mini Converters support 24-bit analog and AES/EBU audio and use standard 1/4" audio jacks so you don't need custom cables!.
  • You get bi-directional SDI to optical fiber conversion, with each direction independent of each other. Optical fiber cables span distances up to 28 miles without any deterioration to the signal..
  • Unlike other converters, a universal power supply is included with international socket adapters for all countries..
Check Stock

Stainless Steel Car Exhaust Tip, 5.5" Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Black/Straight)

  • ...sing the screw connection method, loosen the screw on the tailpipe, put the tailpipe in a suitable position at the end of the exhaust pipe of the car, and then tighten the screw with a wrench. It's just need five minutes for you to finish the installation. If you have problem of installation, please let us know..
  • 【Universal Fit】: The length of this exhaust pipe is 5.5", this universal tail throat is suitable for the exhaust pipe on the market within 2.0"~1.5" diameter. It fits most models and can be selected according to the exhaust pipe of the vehicle, if it is straight, you can choose the straight one. If it is oblique outlet, you can choose the oblique one..
Check Stock