Reviews Ul Nozzle China

mistcooling 30'' OSC Misting Fan Kit - Mid Pressure (1 Fan)

  • Base Fan Mist Kit Includes: 1 - 30'' High velocity 3 Speed Oscillating Fan with 6 Nozzle Mist Hub 1- 250PSI Mid Pressure Pump with Solenoid and Filtration 1- 25ft Roll of Flexible Tubing 1/4'' 6- Ultrafine Brass/Stainless Steel Misting Nozzles – Mounting Clamps and All necessary fittings for easy DIY installation..
  • - PUMP Features: - Whisper quiet operation.
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 5 Fans (With 6 Nozzles each) FAN Features: - UL 507 certified for outdoor use - High Velocity, 3 Speed, Oscillating Fan (Air throw up to 45 feet) - Corrosion resistant finish - 10ft pre-wired 3-prong plug for 120V AC - 7100 CFM, 1/4 HP, 2.6 Amps - Quiet operation - Totally enclosed, maintenance free high performance motor with thermal overload protection - Patented 6 Nozzle Mist Hub.
Check Stock

TERA PUMP Electric Multipurpose Gas Transfer Pump with Quick Stop Nozzle for Gas, Diesel, DEF & More

  • [ TRANSFER RATES ] Transfers up to 2.5 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils - Discharge Hose of 39.4-inch for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
  • [ SUCTION TUBE ] Suction Tube length of about 15-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can or up to 5-Gallon Pails - Suction end Outer Diameter: 1-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation.
  • [ BATTERY POWERED ] Powered with Two (D) Battery Powered, Sold Separately - Big Slide Switch: Big On/Off Switch - Works great with farm equipment, Industrial Vehicles and in Automotive ....
Check Stock

mistcooling 24'' OSC Misting Fan Kit - High Pressure (2 Fans White Color)

  • Base Fan Mist Kit Includes: 2 - 24'' High velocity 3 Speed Oscillating Fan with 6 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 2- 25ft Roll of Flexible HP Tubing 1/4'' 12- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation.
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 10 Fans with 6 nozzles FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish –.
  • 10ft pre-wired 3-prong plug for 120VAC - 5600 CFM, 1/4HP, 2.4 Amps - Quiet operation - Totally enclosed, maintenance free high performance motor with thermal overload protection - Stainless Steel 6 Nozzle Mist Ring (we also offer White and Grey Color Tubing) contact us if you wish to get a different color.
Check Stock

Apache 99000276 3/4" Manual Gravity Flow Fuel Nozzle Kit

  • Required for use with 12 or 110 volt "electric" pumps.
  • Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil.
  • Kit includes: 3/4" x 14' fuel transfer hose with static wire, 3/4" manual nozzle with swivel attached, 15/16" spout (UL approved), and nozzle splash guards.
Check Stock

mistcooling Outdoor Misting Fan System 18\ Fan - High Pressure (18\ - 2 Fans Black)

  • Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
  • 1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..
Check Stock

Homax 4099 Popcorn Texture for Ceilings, 14-Ounce

  • The product is highly durable and handle.
  • Make any necessary ceiling repairs before applying. Sprays best between 70 and 80 degrees Fahrenheit. SHAKE CAN vigorously for one full minute AFTER ball starts to rattle (Shaking continuously during use is also recommended). Carefully insert straw into nozzle, and spray a short burst on test cardboard/material to prepare nozzle. This is a VERTICAL Spray, so hold can VERTICALLY approximately 18" to 24" from ceiling..
Check Stock

CloroxPro Turbo Pro Electrostatic Sprayer, Healthcare and Industrial Spray, Clorox Disinfectant Spray - 29561

  • Cordless hand sprayer, with shoulder strap. Powered by dependable rechargeable Panasonic Lithium battery (UL listed). Additional batteries available as well, for quick swaps during the day. Wall charger included..
  • The VF-ES200holds 1/2 gallons of solution or approximately 2.2 Liters. Fog Nozzle size: 0.5 mm. Fogging Nozzle: 50 micron (5,600 sq.ft per gallon). Adjustable Spray Nozzle size: 100 to 500 micron..
  • Set of Replacement Accessories are provided with each unit, to ensure no down time in case an issue arises. No waiting on parts to get back up and running!.
  • 1 year warranty against manufacturing defects. Replacement parts available and in stock..
  • Electrostatic application device for Clorox Total 360, KlorKleen, Vital Oxide, hypochlorous acid and other disinfecting solutions..
Check Stock

Official Creality Ender 3 V2 3D Printer with Upgraded 32-bit Silent Motherboard Carborundum Glass Platform Resuming Printing Function Free Filaments & Nozzles 220x220x250MM New User Interface

  • Upgraded 32-bit Silent Motherboard: This Creality Ender-3 V2 3D Printer is equipped with Advanced Built-in 32-bit Silent Motherboard. The printer....
  • Resume Printing Function: Ender-3 V2 supports resume printing from the last recorded extruder position after suffering unexpected power outages or....
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle &....
  • UL Certified Meanwell Power Supply: The printer comes with UL Certified Meanwell Power Supply which provides fast heating and longer printing.....
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales....
Check Stock

mistcooling Double Fan Portable Misting System (Mid Pressure w/ 160 Psi Pump 6 Nozzles)

  • Completely portable on rolling cart - Totally customizable to fit your needs - Creates large volume of ultrafine mist - Two High velocity 24'' oscillating fans - Unit is UL rated for outdoor use - 15 Gallon water tank - Up to 4-6 hours of run time (6 nozzles) - Ultrafine Brass/Stainless Steel Mist Nozzles - 160 Or 1500 PSI HP mist pump in steel enclosure - Stainless Steel Mist Rings on HP System.
  • - Lightweight yet durable aluminum frame cart - Corrosion Resistant - Large pneumatic wheels and comfort grip handles on the cart - Easy to haul in Grass, Sand, Gravel or Dirt - Locking front caster and rear level support - Fans and pump can be controlled individually - Includes nozzle plugs to control mist level - Can be powered by portable generator..
  • PUMP: Voltage: 110v AC, 60 hz - Amps: 7 amps (160PSI), 10 amps (1500PSI) -Fan Size: Two 24'' Oscillating - 3 Speed - Air Throw: Up to 40 Feet - UL507 rated for outdoor use.
  • Stainless Steel Ring Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Attaches to any wall mount, floor or pedestal fan Includes Push Lock Inlet Fitting.
Check Stock

Powerextra 1800W Heat Gun Kits Variable Temperature 122℉-1022℉(50℃- 550℃) High Power Hot Air Gun, 2 Speed-Setting, 4 Nozzle Attachments for Crafts, Stripping Paint, Shrinking PVC

  • [Variable temperature control]: 1800W hot air gun provides strong power to heat up to 1022℉(550℃) quickly. Temperature ranges from 120℉ to 1020℉ (50℃- 550℃). it has 2 modes: 50-400℃, 190L/min and 50-550℃, 450L/min, and it is really not that loud honestly..
  • [Overload protection]: The heat gun will automatic power-off to protect the machine from being damaged when it is too hot. For long time use, Please set low temperature and high fan speed to cool down the heating element for minutes. 1. 5M UL certification power cord..
  • [4 nozzle attachments]: spoon reflector nozzle can be used for shrinking polyolefin shrink film.
  • cone nozzle is for welding, shrink sleeking.
  • Fish tail surface nozzle is for drying, Thawing.
  • BBQ lighter is for lighting The coal and so on..
  • [Wide applications]: The heat gun can be used for stripping paint, lighting Charcoal, soldering pipes, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and molding plastics as well as drying and thawing..
  • [What you will get]: 1800W heat gun, user Manual, card, 4 nozzle attachments, and 12 month ..
Check Stock