Reviews Uhmw Polymer

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

JVCC UHMW-PE-20 UHMW Polyethylene Film Tape [20 mil carrier]: 1/2 in. x 18 yds. (Natural/Translucent)

  • JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications..
  • Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement..
  • Applications include: rub strips on conveyors.
  • slide tape replacement on top of track saws, dead plates.
  • furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications..
  • Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic. Release Liner: blue poly film..
  • Thickness: 21.8 mils (carrier, adhesive) 1.8 mils (adhesive) 20 mils (carrier). Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 50 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter....
Check Stock

Shogun Motorsports GSXR600, GSXR750 2011-2019 NO Cut Black Frame Sliders (1 Pack)

  • Shogun frame sliders are superior to other frame slider brands by virtue of their construction and material. Shogun pucks are made of shatter-proof UHMW infused with UV protective polymer. Shogun pucks absorb kinetic energy from crashes and will not shatter in cold temperature like some types of Delrin or fade in the sun. Each puck has a press fit aluminum bushing to hold it in place during impact to reduce the risk of the puck tearing off of the mounting point..
  • Shogun uses socket head bolts in nearly every kit, allowing for stronger frame slider design in a more compact space. Newer applications of Shogun Frame Sliders make use of a counter sunk design, which distributes the force of impact over a wider area and gives additional strength to the system so that the puck remains attached to the motorcycle..
  • Available in a 3 piece kit (bar sliders, swingarm sliders and frame sliders.). Made in the USA.
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • ...e same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do..
  • The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect s....
Check Stock

OES Frame Sliders 2019 2020 2021 Ninja ZX6R No Cut (Green)

  • Shogun frame sliders are superior to other frame slider brands by virtue of their construction and material. Shogun pucks are made of shatter-proof UHMW infused with UV protective polymer. Shogun pucks absorb kinetic energy from crashes and will not shatter in cold temperature like some types of Delrin or fade in the sun. Each puck has a press fit aluminum bushing to hold it in place during impact to reduce the risk of the puck tearing off of the mounting point..
  • Shogun uses socket head bolts in nearly every kit, allowing for stronger frame slider design in a more compact space. Newer applications of Shogun Frame Sliders make use of a counter sunk design, which distributes the force of impact over a wider area and gives additional strength to the system so that the puck remains attached to the motorcycle..
  • Available in a 3 piece kit (bar sliders, swingarm sliders and frame sliders.). Available in a 3 piece kit (bar sliders, swingarm sliders and frame sliders.). Made in the USA.
Check Stock

APT, UHMW (Ultra-high Molecular Weight) Polyethylene Tape, Resists Abrasion, Impact, for Surface Protection and Friction and Noise Reduction for Lining Sliding Surfaces. (1' x 5Yds, 5 Mil UHMW)

  • 【Longer Durability】- The UHMW plastic adhesive tapes has longer wear life than Nylon and PTFE..
  • 【Squeak Reduction】- UHMW low friction tape helps minimize squeaking and rattling caused from vibration or wear..
  • 【Resistant to Abrasion】- Translucent, abrasion resistant backing helps protect surfaces from wear..
  • 【Excellent Adhesion】- Acrylic adhesive tapes has excellent adhesion to metal, wood & other surfaces..
  • 【Trusted Every Where】- Our uhmw adhesive tape are tested for high performance every time. Do not have any harmful chemicals..
Check Stock

TapeCase - 1-5-423-10 423-10 UHMW Tape 1\ x 5yds (1 Roll)

  • UHMW Tape: manufactured with ultra-high molecular weight polyethylene (UHMW) film and aggressive permanent acrylic adhesive, this bonding tape minimizes friction and does not let materials stick to its surface.
  • Applications: acrylic tape is ideal for dry and clean surfaces. It can be used on conveyors, bearings, and sliding surfaces as well as on chutes, hopper liners, wear pads, guide rails, tool tables, fences, furniture, and drawer slides/runners.
  • Quick Assembly: translucent nylon tape creates a virtually invisible bond and guarantees smooth surface appearance. With its aggressive permanent acrylic adhesive, this high-bonding adhesive tape eliminates the need of drilling, screws, or extra labor.
  • Special Feature: polyethylene tape protects surfaces from abrasion and creates a "slip plane" effect that maintains the contact without wear. Nylon tape reduces squeaks, rattles, and other noises that can occur due to the movement of adjacent parts.
  • Specifications: UHMW tape roll is 0.01 in. thick, 1 in. wide, and 15 ft. long. It has an extremely high tensile strength and bonds securely, protecting the surfaces from heavy wear.
Check Stock

APT, UHMW (Ultra-high Molecular Weight) Polyethylene Tape, Resists Abrasion, Impact, for Surface Protection and Friction and Noise Reduction for Lining Sliding Surfaces. (0.75' x 5Yds, 5 Mil UHMW)

  • 【Longer Durability】- The UHMW plastic adhesive tapes has longer wear life than Nylon and PTFE..
  • 【Squeak Reduction】- UHMW low friction tape helps minimize squeaking and rattling caused from vibration or wear..
  • 【Resistant to Abrasion】- Translucent, abrasion resistant backing helps protect surfaces from wear..
  • 【Excellent Adhesion】- Acrylic adhesive tapes has excellent adhesion to metal, wood & other surfaces..
  • 【Trusted Every Where】- Our uhmw adhesive tape are tested for high performance every time. Do not have any harmful chemicals..
Check Stock

OES Frame Sliders 2009 2010 2011 2012 Kawasaki Ninja ZX-6R ZX6R No Cut (Red)

  • *** BODY MODIFICATIONS REQUIRED*** ***THIS IS A RACE KIT CUTTING REQUIRED***.
  • Shogun frame sliders are superior to other frame slider brands by virtue of their construction and material. Shogun pucks are made of shatter-proof UHMW infused with UV protective polymer. Shogun pucks absorb kinetic energy from crashes and will not shatter in cold temperature like some types of Delrin or fade in the sun. Each puck has a press fit aluminum bushing to hold it in place during impact to reduce the risk of the puck tearing off of the mounting point..
  • Shogun uses socket head bolts in nearly every kit, allowing for stronger frame slider design in a more compact space. Newer applications of Shogun Frame Sliders make use of a counter sunk design, which distributes the force of impact over a wider area and gives additional strength to the system so that the puck remains attached to the motorcycle..
  • Available in a 3 piece kit (bar sliders, swingarm sliders and frame sliders.). Available in a 3 piece kit (bar sliders, swingarm sliders and frame sliders.). Made in the USA.
Check Stock

SCENTBLOCKER Scent Blocker Men s Diamondback Snake Buckskin Gaiter Large Tan/Brown

  • Choice of OEM-quality UHMW or special low-friction graphite slides available for most models.
  • Fabricated for exact fit and easy installation.
  • Choice of black or colored slides for most models.
  • Graphite slides are made of UHMW with graphite additives to provide less friction and more speed.
Check Stock