Reviews Typeb Coupler Hose Shank

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • 003c/b003e[HIGH QUALITY]:003c/b003e Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
Check Stock

Tapcooler Beer Valve Connector for Direct Keg Connection

  • DURABLE MATERIAL : 304 stainless steel construction makes the keg coupler more durable and sanitary. stainless will keep the best taste of your beverage, the healthy drinking is "on-the-go" !!.
  • NO LEAKS: Thoughtful 5/16" gas in barb & 3/16"' liquid out barb setting, allows air and beer line connection end closely to attach to coupler, Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking. Features fully integrated 55-PSI pressure relief valve as well as a ball check valve which prevents back flow of beer and can be easily removed for cleaning..
  • EFFORTLESS INSTALLATION: This coupler is easy to operate, you just need to simply push down and turn to properly couple the keg. Compared to handle-type low profile coupler, this low profile coupler avoids the space of operation handle and is designed with a 90° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing..
  • SPACE SAVING: Low profile D system coupler features a space saving....
Check Stock

Portable Air Conditioner Universal Exhaust Hose 5 Inch Diameter 59' Long Clockwise Thread Room Airconditioner AC Vent Replacement Tube

  • 【EXPANDABLE HOSE】The shortened length of the hose is 12.6 inches. You can extend the hose up to 59 inches..
  • 【EASY INSTALLATION】 Fully expand the end of the hose, align with the coupler, and rotate the coupler counter-clockwise to twist onto the hose. Repeat on the other end of the hose to attach to the second coupler..
  • 【UNIVERSAL SIZE】Exhaust hose fits various portable air conditioner models as long as you are using the same hose its connector has 5 inches / 13 cm (outer edge to outer edge) in diameter..
  • 【DURABLE AND PORTABLE】 The air exhaust hose is made of polypropylene with good flexibility, which is a good replacement when the essential vent hose has cracked..
  • 【Application】 Our hose fits the most popular portable AC models that use a 5-inch diameter hose, such as Honeywell, Toshiba, Delonghi, Haier, Whirlpool and more..
Check Stock

Metric 10x1 (f) to 1/8\ NPT (m) adapter

  • Brass adapter threaded M 10x1 (f) to 1/8" NPT (m).
  • Certain Milwaukee 18v grease guns ship with a hose that has a metric 10x1 working end. If you try to replace the coupler and the new coupler does not fit, you need this adapter.
  • NOT ALL MILWAUKEE GUNS ARE AFFECTED. Unfortunately Milwaukee has not said which batches ship with metric hoses and which ship with NPT ends, as they are supposed to. You will need to check the threads or attempt to replace the coupler to know which hose you have..
  • Does not include LockNLube Grease Coupler or grease gun hose..
Check Stock

YoleShy Portable Air Conditioner Hose 5.9 Inch Diameter AC Hose with Clockwise Thread 80 Inch Length Compatible with Delonghi and More

  • CLOCKWISE: Our ac hose thread is clockwise and has a diameter of 5.9 inches. Suitable for most portable air conditioners, such as Delonghi. Please measure and compare your portable air conditioner coupler before purchasing..
  • STRONG & DURABLE: The exhaust hose is made of thickened polypropylene with a built-in high-quality steel ring, which has better heat resistance, wear resistance, aging resistance and longer service life. It can withstand long-term hot air flow withou.
  • LONGER & 80 INCHES: Our ac hose has good telescopic function and flexibility. It can be stretched up to 80 inches, that is more convenient to use in large spaces. It is fully retracted to 14 inches for easy storage..
  • EASY TO INSTALL: Fully stretch the two ends of the exhaust hose, and slowly rotate clockwise to a state where it cannot rotate along the thread of the coupler. Inserting the coupler into the air conditioner, it can be firmly fixed and obtain high-qu.
  • INFINITE CONNECTION: The ends of the two exhaust hose can be tightly connected, and have good tightness and no leakage. You can assemble multiple exhaust hose into hose of any length according to actual needs. (Only 1 exhaust hose, no coupler).
Check Stock

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

Bev Rite CRCK101 Premium Refrigerator Conversion Kit Door Mount Keg Tap Beer Single Line, without CO2 Tank Clear

  • Includes parts for one line complete setup.
  • Includes faucet, shank, faucet handle, wrench and D system keg coupler (Sankey).
  • Includes premium double gauge tap rite beer regulator.
  • Includes NSF listed beer and air hose and clamps.
  • Includes US made 6×5 wall mount stainless steel drip tray.
Check Stock

DuraComfort Air Conditioner Hose, 5.9 Inch (6”) Diameter Portable AC Hose, Anti-Clockwise Thread Up to 80 Inch Length, Room Air Conditioner Replace Vent Exhaust Hose

  • ...MORE FLEXIBLE AND LONGER】： The Air Conditioning Hose is more longer than the original which could extend up to 80 inches, reach the window and still allow movement of the air conditioner. So it’s suitable for anywhere you want..
  • ✔【EASY TO INSTALL】： Fully expand the end of AC vent, align with the coupler, and rotate the coupler counter-clockwise to twist onto the hose. Repeat on the other end of the hose to attach to the second coupler. It’s that simple.Inserting the coupler into the air conditioner, it can be firmly fixed..
  • ✔【ENVIRONMENTALLY FRIENDLY MATERIALS】：DuraComfort AC hose uses environmentally friendly materials which has no peculiar smell, and is more healthy for your body..
  • ✔【100% SATISFACTION GUARANTEE】We provide 1 Year warranty for the ac hose.For any issues or concerns, you can easily contact us on Amazon or directly via our brand's official service email..
Check Stock

MOAOO Portable Air Conditioner Exhaust Hose, Air Conditioner Hose with 5.9' Diameter, Counter Clockwise Thread & Length up to 59'. Great for LG, Haier and Many More Portable Air Conditioners

  • Universal Compatibility : Our exhaust hose fits to various portable air conditioners models using 5.9 inches/ 15 cm outer diameter hose and its thread is counter clockwise. Please make sure this is the correct hose both the size and thread for your portable ac before purchasing..
  • Adjustable Length : Our ac hose has good telescopic function and flexibility. The shortened length of the hose is 11 inches. You can extend the hose up to 59 inches. At home or in the office, our flexible, extendable air conditioning hose fits into any space..
  • Strong & Durable : Our Air Conditioning Hose is made of strong, flexible polypropylene, Very durable and keep your air conditioner from leaking when the vent hose has cracked. Keep your air conditioner in excellent condition with our portable AC hose..
  • Easy to Install : Fully expand the end of the hose, align with the coupler, and rotate the coupler counter-clockwise to twist onto the hose. Simply select your perfect length, insert into the connector plug and rotate anti-clockwise to complete the installation..
  • Counter Clockwise : Our ac hose thread is counter clockwise and have good tightness and no leakage. Please measure and compare your portable air conditioner coupler before purchasing..
Check Stock

Keg Coupler, Beer Keg Coupler, D Sankey, Sankey D, Sankey D Coupler Stainless Probe & Body, Keg Couplers With Black Handle & Hose Clamp

  • ★ Stainless Steel Body ★ The Keg Coupler’s Body is made of 304 stainless steel that will not wear away over time and it will not chip like a chrome keg couple. It can improve durability and resistance to chemicals..
  • ★ Stainless Steel Probe ★ The Stainless Steel Keg Coupler’s Probe is made of stainless steel that for maximum durability and sanitation, for the ultimate in purity excellent for beer, wine, and cider..
  • ★ Tap For American Kegs Or Sankey Keg ★ The beer keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on..
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose..
  • ★ With A Pressure Relief Valve ★ This keg coupler features a 55 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler..
Check Stock